1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 22:05:20 +02:00

[adm8668] add a gpiolib driver

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34564 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian 2012-12-06 22:41:04 +00:00
parent 2c4923e5d1
commit dfe5d03afb
4 changed files with 143 additions and 2 deletions

View File

@ -2,6 +2,7 @@ CONFIG_ADM8668=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_AMBA=y
# CONFIG_ARM_SP805_WATCHDOG is not set
@ -31,8 +32,11 @@ CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y

View File

@ -0,0 +1,123 @@
/*
* Infineon/ADMTek ADM8668 WildPass GPIO support
*
* Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
*
* Licensed under the terms of GPLv2.
*
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <adm8668.h>
#define GPIO_MASK 0x3f
#define GPIO_IN_OFS 0
#define GPIO_OUT_OFS 6
#define GPIO_OE_OFS 12
struct adm8668_gpio_chip {
void __iomem *base;
struct gpio_chip chip;
};
static int adm8668_gpio_dir_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct adm8668_gpio_chip *c =
container_of(chip, struct adm8668_gpio_chip, chip);
u32 mask;
/* clear input, set output enable and output value */
mask = __raw_readl(c->base);
mask &= ~(1 << offset);
mask |= (1 << (offset + GPIO_OE_OFS));
if (value)
mask |= (1 << (offset + GPIO_OUT_OFS));
else
mask &= ~(1 << (offset + GPIO_OUT_OFS));
__raw_writel(mask, c->base);
return 0;
}
static int adm8668_gpio_dir_in(struct gpio_chip *chip,
unsigned offset)
{
struct adm8668_gpio_chip *c =
container_of(chip, struct adm8668_gpio_chip, chip);
u32 mask;
mask = __raw_readl(c->base);
mask &= ~(((1 << (offset + GPIO_OE_OFS)) | (1 << (offset + GPIO_OUT_OFS))));
mask |= (1 << offset);
__raw_writel(mask, c->base);
return 0;
}
static void adm8668_gpio_set(struct gpio_chip *chip,
unsigned offset, int value)
{
struct adm8668_gpio_chip *c =
container_of(chip, struct adm8668_gpio_chip, chip);
u32 mask;
mask = __raw_readl(c->base);
if (value)
mask |= (1 << (offset + GPIO_OUT_OFS));
else
mask &= ~(1 << (offset + GPIO_OUT_OFS));
__raw_writel(mask, c->base);
}
static int adm8668_gpio_get(struct gpio_chip *chip,
unsigned offset)
{
struct adm8668_gpio_chip *c =
container_of(chip, struct adm8668_gpio_chip, chip);
u32 value;
value = __raw_readl(c->base) & GPIO_MASK;
return value & (1 << offset);
}
static struct adm8668_gpio_chip adm8668_gpio_cpu = {
.base = (void __iomem *)KSEG1ADDR(ADM8668_CONFIG_BASE + CRGPIO_REG),
.chip = {
.label = "adm8668-cpu-gpio",
.direction_output = adm8668_gpio_dir_out,
.direction_input = adm8668_gpio_dir_in,
.set = adm8668_gpio_set,
.get = adm8668_gpio_get,
.ngpio = 6,
},
};
static struct adm8668_gpio_chip adm8668_gpio_wlan = {
.base = (void __iomem *)KSEG1ADDR(ADM8668_WLAN_BASE + GPIO_REG),
.chip = {
.label = "adm8668-wlan-gpio",
.direction_output = adm8668_gpio_dir_out,
.direction_input = adm8668_gpio_dir_in,
.set = adm8668_gpio_set,
.get = adm8668_gpio_get,
.ngpio = 6,
.base = 6,
},
};
static int __init adm8668_gpio_init(void)
{
int ret;
ret = gpiochip_add(&adm8668_gpio_cpu.chip);
if (ret)
return ret;
return gpiochip_add(&adm8668_gpio_wlan.chip);
}
arch_initcall(adm8668_gpio_init);

View File

@ -0,0 +1,13 @@
#ifndef __ADM8668_GPIO_H__
#define __ADM8668_GPIO_H__
#define gpio_to_irq(gpio) -1
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#include <asm-generic/gpio.h>
#endif

View File

@ -10,7 +10,7 @@
include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -105,6 +105,25 @@ config BCM47XX
@@ -105,6 +105,26 @@ config BCM47XX
help
Support for BCM47XX based boards
@ -29,6 +29,7 @@
+ select DMA_NONCOHERENT
+ select SWAP_IO_SPACE
+ select SYS_HAS_EARLY_PRINTK
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ ADM8668 board support by neutronscott
+ Scott Nicholas <neutronscott@scottn.us>
@ -36,7 +37,7 @@
config BCM63XX
bool "Broadcom BCM63XX based boards"
select CEVT_R4K
@@ -813,6 +832,7 @@ config NLM_XLP_BOARD
@@ -813,6 +833,7 @@ config NLM_XLP_BOARD
endchoice