1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 18:50:49 +02:00

Add hardware details for WRT54G v1.1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@300 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nico 2005-03-02 01:28:40 +00:00
parent ddc973adbe
commit e028398546
7 changed files with 425 additions and 0 deletions

View File

@ -0,0 +1,16 @@
system type : Broadcom BCM947XX
processor : 0
cpu model : BCM4710 V0.0
BogoMIPS : 82.94
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
dcache hits : 2866936757
dcache misses : 57830034
icache hits : 1724839356
icache misses : 431170605
instructions : 2156850242

View File

@ -0,0 +1,96 @@
CPU revision is: 00024000
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4710 rev 0 at 125 MHz
Using 62.400 MHz high precision timer.
!unable to setup serial console!
Calibrating delay loop... 82.94 BogoMIPS
Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Software Watchdog Timer: 0.05, timer margin: 60 sec
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1fc00000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x003f0000 : "linux"
0x000edd94-0x001fd000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00200000-0x003f0000 : "OpenWrt"
sflash: chipcommon not found
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 100k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
diag boardtype: 0000041a
using v1 hardware
jffs2.bbc: SIZE compression mode activated.
PCI: Setting latency timer of device 00:02.0 to 64
5325E phy=FFFFFFFF
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
PCI: Setting latency timer of device 00:08.0 to 64
5325E phy=FFFFFFFF
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
PCI: Setting latency timer of device 01:08.0 to 64
PCI: Enabling device 01:08.0 (0004 -> 0006)
eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
device eth0 entered promiscuous mode
vlan2: add 01:00:5e:00:00:01 mcast address to master interface
device eth1 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 3(eth2) entering learning state
br0: port 2(eth1) entering learning state
br0: port 1(vlan2) entering learning state
br0: port 3(eth2) entering forwarding state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(vlan2) entering forwarding state
br0: topology change detected, propagating
vlan1: add 01:00:5e:00:00:01 mcast address to master interface

View File

@ -0,0 +1,54 @@
br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6022 errors:0 dropped:0 overruns:0 frame:0
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB)
eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:6204 errors:0 dropped:0 overruns:0 frame:0
TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB)
Interrupt:3 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB)
Interrupt:4 Base address:0x8000
eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:2202
TX packets:93 errors:36 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB)
Interrupt:6 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:181 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB)
vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6023 errors:0 dropped:0 overruns:0 frame:0
TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB)

View File

@ -0,0 +1,23 @@
Linksys WRT54G v1.1
Online Description from Linksys:
http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601
CPU: BCM4710 at 125 MHz
RAM: 16 MB
Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit)
1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller
1 Broadcom BCM4320 802.11 Wireless Controller
1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith
serial port possible (but not used)
JTAG interface available (but not used)
List of files:
nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade
cpuinfo.txt: contents of /proc/cpuinfo (2.4.29)
pci.txt: contents of /proc/pci (2.4.29)
dmesg-2_4_29.txt: dmesg from Kernel 2.4.29
lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported)
--
Nico

View File

@ -0,0 +1,92 @@
0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 6
Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 3
Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 2
Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 2
Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+
Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Expansion ROM at <unassigned> [disabled] [size=2K]
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 6
Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin E routed to IRQ 2
Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin F routed to IRQ 4
Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
Expansion ROM at <unassigned> [disabled] [size=2K]
0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K]

View File

@ -0,0 +1,88 @@
Intel_firmware_version=v1.41.8
boardnum=42
boardtype=bcm94710dev
boot_date=Fri Sep 26 00:34:47 2003
boot_ver=v1.5
boot_wait=on
clkfreq=125
dl_ram_addr=a0001000
et0macaddr=00:0C:41:B3:3C:55
et0mdcport=0
et0phyaddr=30
et1macaddr=00:0C:41:B3:3C:56
et1mdcport=1
et1phyaddr=30
firmware_version=v1.42.2
flash_type=AMD 29lv320DT 2Mx16 TopB
lan_ipaddr=192.168.1.1
lan_netmask=255.255.255.0
os_flash_addr=bfc40000
os_ram_addr=80001000
pmon_ver=PMON 3.31.15.0
scratch=a0180000
sdram_config=0x0000
sdram_init=0x0419
sdram_ncdl=0x00000000
sdram_refresh=0x8040
watchdog=5000
wl0_active_mac=
wl0_afterburner=auto
wl0_afterburner_override=-1
wl0_antdiv=-1
wl0_ap_ip=
wl0_ap_isolate=0
wl0_ap_ssid=
wl0_auth=0
wl0_auth_mode=disabled
wl0_bcn=100
wl0_channel=6
wl0_closed=0
wl0_corerev=5
wl0_country=Worldwide
wl0_country_code=AU
wl0_crypto=tkip
wl0_dtim=1
wl0_frag=2346
wl0_frameburst=on
wl0_gmode=1
wl0_gmode_protection=auto
wl0_hwaddr=00:0C:41:B3:3C:57
wl0_ifname=eth2
wl0_infra=1
wl0_key1=
wl0_key2=
wl0_key3=
wl0_key4=
wl0_key=1
wl0_lazywds=1
wl0_mac_deny=
wl0_mac_list=
wl0_maclist=
wl0_macmode1=disabled
wl0_macmode=disabled
wl0_mode=ap
wl0_mrate=0
wl0_net_mode=mixed
wl0_passphrase=
wl0_phytype=g
wl0_phytypes=g
wl0_plcphdr=long
wl0_radio=1
wl0_radioids=BCM2050
wl0_radius_ipaddr=
wl0_radius_key=
wl0_radius_port=1812
wl0_rate=0
wl0_rateset=default
wl0_rts=2347
wl0_ssid=linksys
wl0_unit=0
wl0_wds=
wl0_wep=off
wl0_wep_bit=64
wl0_wep_buf=
wl0_wep_gen=
wl0_wep_last=
wl0_wpa_gtk_rekey=3600
wl0_wpa_psk=
wl_country_code=AU

View File

@ -0,0 +1,56 @@
PCI devices found:
Bus 0, device 0, function 0:
Class 0500: PCI device 14e4:0803 (rev 0).
IRQ 6.
Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
Non-prefetchable 32 bit memory at 0x0 [0x7ffffff].
Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff].
Non-prefetchable 32 bit memory at 0x80000000 [0xffffffff].
Bus 0, device 1, function 0:
Class 0200: PCI device 14e4:4711 (rev 0).
IRQ 5.
Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
Bus 0, device 2, function 0:
Class 0200: PCI device 14e4:4713 (rev 0).
IRQ 3.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
Bus 0, device 3, function 0:
Class 0703: PCI device 14e4:4712 (rev 0).
IRQ 2.
Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff].
Bus 0, device 4, function 0:
Class 0c03: PCI device 14e4:4715 (rev 0).
IRQ 2.
Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
Bus 0, device 5, function 0:
Class 0604: PCI device 14e4:0804 (rev 0).
IRQ 6.
Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
Non-prefetchable 32 bit memory at 0x8000000 [0xfffffff].
Bus 0, device 6, function 0:
Class 0b30: PCI device 14e4:0805 (rev 0).
IRQ 6.
Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
Non-prefetchable 32 bit memory at 0xff200000 [0xff3fffff].
Bus 0, device 7, function 0:
Class 0501: PCI device 14e4:0811 (rev 0).
IRQ 2.
Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
Non-prefetchable 32 bit memory at 0x1f000000 [0x1fffffff].
Bus 0, device 8, function 0:
Class 0200: PCI device 14e4:4713 (rev 0).
IRQ 4.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x18008000 [0x18008fff].
Bus 1, device 0, function 0:
Class 0600: PCI device 14e4:4710 (rev 1).
IRQ 6.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x40000000 [0x40001fff].
Prefetchable 32 bit memory at 0x0 [0x7ffffff].
Bus 1, device 8, function 0:
Class 0280: PCI device 14e4:4320 (rev 3).
IRQ 6.
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0x40002000 [0x40003fff].