qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 07:29:33 +02:00
Code

disable image generation for boards which we still have problems with (at least if CONFIG_DEVEL is not selected)

Browse Source 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7902 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2007-07-09 16:36:19 +00:00
parent d62e77d17e
commit e572a2988f
3 changed files with 25 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
target/linux/adm5120-2.6/image/Makefile
View File

@ -82,7 +82,7 @@ root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
endef
define Image/Build/RouterBoard
$(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-vmlinux
$(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux
$(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) '
endef
@ -91,6 +91,7 @@ define Image/Build
ifneq ($(1),jffs2-256k)
ifneq ($(1),jffs2-128k)
$(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1)),WP54G-WRT)
ifeq (CONFIG_DEVEL,y)
$(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1)),BR-6104K)
$(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1)),BR-6104KP)
$(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6114WG)
@ -117,6 +118,7 @@ ifneq ($(1),jffs2-128k)
$(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1)),WPP54AG)
endif
endif
endif
ifeq ($(1),tgz)
$(call Image/Build/RouterBoard)
endif
@ -143,12 +145,17 @@ define Image/Build/LZMAKernel/Admboot
$(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1))
endef
define Image/Build/Initramfs/RouterBoard
$(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf
endef
define Image/Build/Initramfs
$(call Image/Build/Initramfs/RouterBoard)
$(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
ifeq (CONFIG_DEVEL,y)
$(call Image/Build/LZMAKernel/Generic,generic,bin)
$(call Image/Build/LZMAKernel/Generic,rb-100,elf)
$(call Image/Build/LZMAKernel/Generic,np27g,bin)
$(call Image/Build/LZMAKernel/Generic,wp54g,bin)
$(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
$(call Image/Build/LZMAKernel/Admboot,br-6104k,gz)
$(call Image/Build/LZMAKernel/Admboot,easy-5120,gz)
$(call Image/Build/LZMAKernel/Admboot,easy-83000,gz)
@ -158,6 +165,7 @@ define Image/Build/Initramfs
$(call Image/Build/LZMAKernel/Admboot,cas-771,gz)
$(call Image/Build/LZMAKernel/Admboot,cas-790,gz)
$(call Image/Build/LZMAKernel/Admboot,cas-861,gz)
endif
endef
$(eval $(call BuildImage))

20
target/linux/adm5120-2.6/image/lzma-loader/src/board.c
View File

@ -1,5 +1,5 @@
/*
* ADM5120 specific board support for LZMA decompressor
* ADM5120 specific board support for LZMA decompressor
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
@ -24,7 +24,7 @@
#define READREG(r) *(volatile unsigned int *)(r)
#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
/*
/*
* INTC definitions
*/
#define INTC_BASE 0xB2200000
@ -32,7 +32,7 @@
/* INTC registers */
#define INTC_REG_IRQ_DISABLE 0x0C
/*
/*
* UART definitions
*/
#define UART_BASE 0xB2600000
@ -61,7 +61,7 @@
#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */
#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */
/*
/*
* SWITCH definitions
*/
#define SWITCH_BASE 0xB2000000
@ -96,8 +96,9 @@
static void uart_init(void)
{
#if 0
unsigned int t;
/* disable uart */
UART_WRITE(UART_REG_CTRL, 0);
@ -106,7 +107,7 @@ static void uart_init(void)
UART_WRITE(UART_REG_LCRM, t);
t = UART_READ(UART_REG_LCRL);
UART_WRITE(UART_REG_LCRL, t);
/* keep data, stop, and parity bits, but disable FIFO */
t = UART_READ(UART_REG_LCRH);
t &= ~(UART_LCRH_FEN);
@ -117,6 +118,7 @@ static void uart_init(void)
/* enable uart, and disable interrupts */
UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
#endif
}
static void uart_putc(int ch)
@ -125,7 +127,7 @@ static void uart_putc(int ch)
UART_WRITE(UART_REG_DATA, ch);
while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFF) != 0);
while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
}
/*
@ -150,7 +152,7 @@ static void intc_init(void)
static void switch_init(void)
{
/* disable PHYS ports */
SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
(SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
/* disable CPU port */
@ -159,7 +161,7 @@ static void switch_init(void)
/* disable GPIO lines */
SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
/* disable LED lines */
SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);

3
target/linux/adm5120eb-2.6/image/Makefile
View File

@ -69,8 +69,11 @@ define Image/Build/LZMAKernel/ZyXEL
endef
define Image/Build/Initramfs
# this line is here intentionally
ifeq (CONFIG_DEVEL,y)
$(call Image/Build/LZMAKernel/ZyXEL,p-334wt,bin)
$(call Image/Build/LZMAKernel/ZyXEL,p-335,bin)
endif
endef
$(eval $(call BuildImage))