mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-25 02:48:37 +02:00
[ppc40x] add support for the OpenRB Light board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16908 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
parent
876b6c07d8
commit
e7a663410a
@ -128,6 +128,7 @@ CONFIG_NOT_COHERENT_CACHE=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_DEVICE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OPENRB_LIGHT=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xc0000000
|
||||
CONFIG_PCI=y
|
||||
|
||||
@ -39,6 +39,10 @@ define Image/Build/jffs2-64k
|
||||
dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv2 bs=1152k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
||||
) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv2-jffs2.img
|
||||
( \
|
||||
dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-light bs=1152k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
||||
) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-light-jffs2.img
|
||||
endef
|
||||
|
||||
define Image/Build/squashfs
|
||||
@ -56,6 +60,10 @@ define Image/Build/squashfs
|
||||
dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.magicboxv2 bs=1152k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
||||
) > $(BIN_DIR)/openwrt-$(BOARD)-magicboxv2-$(1).img
|
||||
( \
|
||||
dd if=$(LINUX_DIR)/arch/powerpc/boot/cuImage.openrb-light bs=1152k conv=sync; \
|
||||
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
||||
) > $(BIN_DIR)/openwrt-$(BOARD)-openrb-light-$(1).img
|
||||
endef
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
|
||||
339
target/linux/ppc40x/patches-2.6.30/007-openrb-light.patch
Normal file
339
target/linux/ppc40x/patches-2.6.30/007-openrb-light.patch
Normal file
@ -0,0 +1,339 @@
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -76,7 +76,7 @@
|
||||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
cuboot-acadia.c cuboot-amigaone.c cuboot-magicboxv1.c \
|
||||
- cuboot-magicboxv2.c
|
||||
+ cuboot-magicboxv2.c cuboot-openrb-light.c
|
||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||
|
||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||
@@ -195,6 +195,7 @@
|
||||
image-$(CONFIG_ACADIA) += cuImage.acadia
|
||||
image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1
|
||||
image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2
|
||||
+image-$(CONFIG_OPENRB_LIGHT) += cuImage.openrb-light
|
||||
|
||||
# Board ports in arch/powerpc/platform/44x/Kconfig
|
||||
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
||||
--- a/arch/powerpc/platforms/40x/Kconfig
|
||||
+++ b/arch/powerpc/platforms/40x/Kconfig
|
||||
@@ -79,6 +79,16 @@
|
||||
help
|
||||
This option enables support for the AMCC PPC405EX board.
|
||||
|
||||
+config OPENRB_LIGHT
|
||||
+ bool "OpenRB Light"
|
||||
+ depends on 40x
|
||||
+ default n
|
||||
+ select PPC40x_SIMPLE
|
||||
+ select 405EP
|
||||
+ select PCI
|
||||
+ help
|
||||
+ This option enables support for the OpenRB Light board.
|
||||
+
|
||||
#config REDWOOD_5
|
||||
# bool "Redwood-5"
|
||||
# depends on 40x
|
||||
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
|
||||
@@ -54,6 +54,7 @@
|
||||
"amcc,acadia",
|
||||
"magicboxv1",
|
||||
"magicboxv2",
|
||||
+ "openrb,light",
|
||||
};
|
||||
|
||||
static int __init ppc40x_probe(void)
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/cuboot-openrb-light.c
|
||||
@@ -0,0 +1,41 @@
|
||||
+/*
|
||||
+ * Old U-boot compatibility for OpenRB Light board
|
||||
+ *
|
||||
+ * Author: Gabor Juhos <juhosg@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include "ops.h"
|
||||
+#include "io.h"
|
||||
+#include "dcr.h"
|
||||
+#include "stdio.h"
|
||||
+#include "4xx.h"
|
||||
+#include "44x.h"
|
||||
+#include "cuboot.h"
|
||||
+
|
||||
+#define TARGET_4xx
|
||||
+#define TARGET_405EP
|
||||
+#include "ppcboot.h"
|
||||
+
|
||||
+static bd_t bd;
|
||||
+
|
||||
+static void openrb_light_fixups(void)
|
||||
+{
|
||||
+ ibm405ep_fixup_clocks(33333000);
|
||||
+ ibm4xx_sdram_fixup_memsize();
|
||||
+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
|
||||
+}
|
||||
+
|
||||
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
+ unsigned long r6, unsigned long r7)
|
||||
+{
|
||||
+ CUBOOT_INIT();
|
||||
+ platform_ops.fixups = openrb_light_fixups;
|
||||
+ platform_ops.exit = ibm40x_dbcr_reset;
|
||||
+ fdt_init(_dtb_start);
|
||||
+ serial_console_init();
|
||||
+}
|
||||
+
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/dts/openrb-light.dts
|
||||
@@ -0,0 +1,244 @@
|
||||
+/*
|
||||
+ * Device Tree Source for OpenRB Light board
|
||||
+ *
|
||||
+ * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
|
||||
+ *
|
||||
+ * Based on magicboxv2.dts
|
||||
+ *
|
||||
+ * This file is licensed under the terms of the GNU General Public
|
||||
+ * License version 2. This program is licensed "as is" without
|
||||
+ * any warranty of any kind, whether express or implied.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+/ {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ model = "openrb,light";
|
||||
+ compatible = "openrb,light";
|
||||
+ dcr-parent = <&{/cpus/cpu@0}>;
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &EMAC0;
|
||||
+ serial0 = &UART0;
|
||||
+ serial1 = &UART1;
|
||||
+ };
|
||||
+
|
||||
+ cpus {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ cpu@0 {
|
||||
+ device_type = "cpu";
|
||||
+ model = "PowerPC,405EP";
|
||||
+ reg = <0x00000000>;
|
||||
+ clock-frequency = <0xbebc200>; /* Filled in by zImage */
|
||||
+ timebase-frequency = <0>; /* Filled in by zImage */
|
||||
+ i-cache-line-size = <20>;
|
||||
+ d-cache-line-size = <20>;
|
||||
+ i-cache-size = <4000>;
|
||||
+ d-cache-size = <4000>;
|
||||
+ dcr-controller;
|
||||
+ dcr-access-method = "native";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
|
||||
+ };
|
||||
+
|
||||
+ UIC0: interrupt-controller {
|
||||
+ compatible = "ibm,uic";
|
||||
+ interrupt-controller;
|
||||
+ cell-index = <0>;
|
||||
+ dcr-reg = <0x0c0 0x009>;
|
||||
+ #address-cells = <0>;
|
||||
+ #size-cells = <0>;
|
||||
+ #interrupt-cells = <2>;
|
||||
+ };
|
||||
+
|
||||
+ plb {
|
||||
+ compatible = "ibm,plb3";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ SDRAM0: memory-controller {
|
||||
+ compatible = "ibm,sdram-405ep";
|
||||
+ dcr-reg = <0x010 0x002>;
|
||||
+ };
|
||||
+
|
||||
+ MAL: mcmal {
|
||||
+ compatible = "ibm,mcmal-405ep", "ibm,mcmal";
|
||||
+ dcr-reg = <0x180 0x062>;
|
||||
+ num-tx-chans = <4>;
|
||||
+ num-rx-chans = <2>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xb 0x4 /* TXEOB */
|
||||
+ 0xc 0x4 /* RXEOB */
|
||||
+ 0xa 0x4 /* SERR */
|
||||
+ 0xd 0x4 /* TXDE */
|
||||
+ 0xe 0x4 /* RXDE */>;
|
||||
+ };
|
||||
+
|
||||
+ OPB0: opb {
|
||||
+ compatible = "ibm,opb-405ep", "ibm,opb";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ ranges = <0xef600000 0xef600000 0x00a00000>;
|
||||
+ dcr-reg = <0x0a0 0x005>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ UART0: serial@ef600300 {
|
||||
+ device_type = "serial";
|
||||
+ compatible = "ns16550";
|
||||
+ reg = <0xef600300 0x00000008>;
|
||||
+ virtual-reg = <0xef600300>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+ current-speed = <115200>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x0 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ UART1: serial@ef600400 {
|
||||
+ device_type = "serial";
|
||||
+ compatible = "ns16550";
|
||||
+ reg = <0xef600400 0x00000008>;
|
||||
+ virtual-reg = <0xef600400>;
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+ current-speed = <115200>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x1 0x4>;
|
||||
+ };
|
||||
+
|
||||
+ IIC: i2c@ef600500 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ compatible = "ibm,iic-405ep", "ibm,iic";
|
||||
+ reg = <0xef600500 0x00000011>;
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <0x2 0x4>;
|
||||
+
|
||||
+ eeprom@50 {
|
||||
+ compatible = "at24,24c16";
|
||||
+ reg = <0x50>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ GPIO0: gpio-controller@ef600700 {
|
||||
+ compatible = "ibm,ppc4xx-gpio";
|
||||
+ reg = <0xef600700 0x00000020>;
|
||||
+ #gpio-cells = <2>;
|
||||
+ gpio-controller;
|
||||
+ };
|
||||
+
|
||||
+ EMAC0: ethernet@ef600800 {
|
||||
+ linux,network-index = <0x0>;
|
||||
+ device_type = "network";
|
||||
+ compatible = "ibm,emac-405ep", "ibm,emac";
|
||||
+ interrupt-parent = <&UIC0>;
|
||||
+ interrupts = <
|
||||
+ 0xf 0x4 /* Ethernet */
|
||||
+ 0x9 0x4 /* Ethernet Wake Up */>;
|
||||
+ local-mac-address = [000000000000]; /* Filled in by zImage */
|
||||
+ reg = <0xef600800 0x00000070>;
|
||||
+ mal-device = <&MAL>;
|
||||
+ mal-tx-channel = <0>;
|
||||
+ mal-rx-channel = <0>;
|
||||
+ cell-index = <0>;
|
||||
+ max-frame-size = <0x5dc>;
|
||||
+ rx-fifo-size = <0x1000>;
|
||||
+ tx-fifo-size = <0x800>;
|
||||
+ phy-mode = "mii";
|
||||
+ phy-map = <0x00000000>;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ user {
|
||||
+ label = "openrb:green:user";
|
||||
+ gpios = <&GPIO0 2 1>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ EBC0: ebc {
|
||||
+ compatible = "ibm,ebc-405ep", "ibm,ebc";
|
||||
+ dcr-reg = <0x012 0x002>;
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <1>;
|
||||
+ /* The ranges property is supplied by the bootwrapper
|
||||
+ * and is based on the firmware's configuration of the
|
||||
+ * EBC bridge
|
||||
+ */
|
||||
+ clock-frequency = <0>; /* Filled in by zImage */
|
||||
+
|
||||
+ nor_flash@ff800000 {
|
||||
+ compatible = "cfi-flash";
|
||||
+ bank-width = <2>;
|
||||
+ reg = <0x00000000 0xff800000 0x00800000>;
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ partition@0 {
|
||||
+ label = "linux";
|
||||
+ reg = <0x0 0x120000>;
|
||||
+ };
|
||||
+ partition@120000 {
|
||||
+ label = "rootfs";
|
||||
+ reg = <0x120000 0x6a0000>;
|
||||
+ };
|
||||
+ partition@7c0000 {
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x7c0000 0x30000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ PCI0: pci@ec000000 {
|
||||
+ device_type = "pci";
|
||||
+ #interrupt-cells = <1>;
|
||||
+ #size-cells = <2>;
|
||||
+ #address-cells = <3>;
|
||||
+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
|
||||
+ primary;
|
||||
+ reg = <0xeec00000 0x00000008 /* Config space access */
|
||||
+ 0xeed80000 0x00000004 /* IACK */
|
||||
+ 0xeed80000 0x00000004 /* Special cycle */
|
||||
+ 0xef480000 0x00000040>; /* Internal registers */
|
||||
+
|
||||
+ /* Outbound ranges, one memory and one IO,
|
||||
+ * later cannot be changed. Chip supports a second
|
||||
+ * IO range but we don't use it for now
|
||||
+ */
|
||||
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
|
||||
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
|
||||
+
|
||||
+ /* Inbound 2GB range starting at 0 */
|
||||
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
+
|
||||
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
|
||||
+ interrupt-map = <
|
||||
+ /* IDSEL 1 */
|
||||
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
|
||||
+
|
||||
+ /* IDSEL 2 */
|
||||
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
|
||||
+
|
||||
+ /* IDSEL 3 */
|
||||
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
|
||||
+
|
||||
+ /* IDSEL 4 */
|
||||
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
|
||||
+ >;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ linux,stdout-path = "/plb/opb/serial@ef600300";
|
||||
+ };
|
||||
+};
|
||||
Loading…
Reference in New Issue
Block a user