mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-27 22:53:09 +02:00
ramips: add support for Belkin F5D8235 v2 board
No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
parent
dbdef16088
commit
ed0adccdff
@ -21,6 +21,7 @@ enum ramips_mach_type {
|
||||
RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */
|
||||
|
||||
/* RT3052 based machines */
|
||||
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
|
||||
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
|
||||
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
|
||||
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
|
||||
|
||||
@ -2,6 +2,12 @@ if RALINK_RT305X
|
||||
|
||||
menu "Ralink RT350x machine selection"
|
||||
|
||||
config RT305X_MACH_F5D8235_V2
|
||||
bool "Belkin F5D8235 v2 support"
|
||||
default y
|
||||
select RALINK_DEV_GPIO_BUTTONS
|
||||
select RALINK_DEV_GPIO_LEDS
|
||||
|
||||
config RT305X_MACH_WHR_G300N
|
||||
bool "Buffalo WHR-G300N support"
|
||||
default y
|
||||
|
||||
@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o
|
||||
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
|
||||
obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
|
||||
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
|
||||
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
|
||||
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
|
||||
|
||||
@ -0,0 +1,141 @@
|
||||
/*
|
||||
* Belkin F5D8235 v2 board support
|
||||
*
|
||||
* Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
#include <linux/rtl8366rb.h>
|
||||
|
||||
#include <asm/mach-ralink/machine.h>
|
||||
#include <asm/mach-ralink/dev-gpio-buttons.h>
|
||||
#include <asm/mach-ralink/dev-gpio-leds.h>
|
||||
#include <asm/mach-ralink/rt305x.h>
|
||||
#include <asm/mach-ralink/rt305x_regs.h>
|
||||
|
||||
#include "devices.h"
|
||||
|
||||
#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5
|
||||
#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6
|
||||
#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11
|
||||
#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8
|
||||
#define F5D8235_V2_GPIO_LED_ROUTER 9
|
||||
#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23
|
||||
#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22
|
||||
#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13
|
||||
#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12
|
||||
|
||||
static struct gpio_led f5d8235v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "f5d8235v2:blue:internet",
|
||||
.gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:amber:internet",
|
||||
.gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:blue:modem",
|
||||
.gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:amber:modem",
|
||||
.gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:blue:router",
|
||||
.gpio = F5D8235_V2_GPIO_LED_ROUTER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:blue:storage",
|
||||
.gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:amber:storage",
|
||||
.gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:blue:security",
|
||||
.gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "f5d8235v2:amber:security",
|
||||
.gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition f5d8235v2_partitions[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0,
|
||||
.size = 0x050000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "kernel and rootfs",
|
||||
.offset = 0x050000,
|
||||
.size = 0x790000,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = 0x1D0000,
|
||||
.size = 0x610000,
|
||||
}, {
|
||||
.name = "nvram",
|
||||
.offset = 0x7E0000,
|
||||
.size = 0x010000,
|
||||
}, {
|
||||
.name = "factory",
|
||||
.offset = 0x7F0000,
|
||||
.size = 0x010000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct physmap_flash_data f5d8235v2_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.nr_parts = ARRAY_SIZE(f5d8235v2_partitions),
|
||||
.parts = f5d8235v2_partitions,
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
static struct rtl8366rb_platform_data f5d8235v2_switch_data = {
|
||||
.gpio_sda = RT305X_GPIO_I2C_SD,
|
||||
.gpio_sck = RT305X_GPIO_I2C_SCLK,
|
||||
};
|
||||
|
||||
static struct platform_device f5d8235v2_switch = {
|
||||
.name = RTL8366RB_DRIVER_NAME,
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &f5d8235v2_switch_data,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init f5d8235v2_init(void)
|
||||
{
|
||||
rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
|
||||
RT305X_GPIO_MODE_UART0_SHIFT) |
|
||||
RT305X_GPIO_MODE_I2C |
|
||||
RT305X_GPIO_MODE_SPI |
|
||||
RT305X_GPIO_MODE_MDIO);
|
||||
rt305x_register_flash(0, &f5d8235v2_flash_data);
|
||||
ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio),
|
||||
f5d8235v2_leds_gpio);
|
||||
rt305x_register_ethernet();
|
||||
platform_device_register(&f5d8235v2_switch);
|
||||
rt305x_register_wifi();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2",
|
||||
f5d8235v2_init);
|
||||
@ -113,6 +113,18 @@ define Image/Build/Profile/WCR150GN
|
||||
endef
|
||||
|
||||
|
||||
mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
|
||||
mtd_f5d8235_kernel_part_size=1572864
|
||||
mtd_f5d8235_rootfs_part_size=6356992
|
||||
define Image/Build/Template/F5D8235V2
|
||||
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
|
||||
endef
|
||||
|
||||
define Image/Build/Profile/F5D8235V2
|
||||
$(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
|
||||
endef
|
||||
|
||||
|
||||
ifeq ($(CONFIG_RALINK_RT305X),y)
|
||||
define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/DIR300B1,$(1))
|
||||
@ -121,6 +133,7 @@ define Image/Build/Profile/Default
|
||||
$(call Image/Build/Profile/PWH2004,$(1))
|
||||
$(call Image/Build/Profile/WHRG300N,$(1))
|
||||
$(call Image/Build/Profile/WCR150GN,$(1))
|
||||
$(call Image/Build/Profile/F5D8235V2,$(1))
|
||||
endef
|
||||
endif
|
||||
|
||||
|
||||
@ -117,6 +117,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
# CONFIG_RALINK_RT288X is not set
|
||||
CONFIG_RALINK_RT305X=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
||||
CONFIG_RT305X_MACH_FONERA20N=y
|
||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
||||
CONFIG_RT305X_MACH_PWH2004=y
|
||||
|
||||
@ -127,6 +127,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
|
||||
# CONFIG_RALINK_RT288X is not set
|
||||
CONFIG_RALINK_RT305X=y
|
||||
CONFIG_RT305X_MACH_DIR_300_REVB=y
|
||||
CONFIG_RT305X_MACH_F5D8235_V2=y
|
||||
CONFIG_RT305X_MACH_FONERA20N=y
|
||||
CONFIG_RT305X_MACH_V22RW_2X2=y
|
||||
CONFIG_RT305X_MACH_PWH2004=y
|
||||
|
||||
Loading…
Reference in New Issue
Block a user