mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-20 00:58:25 +02:00
adm5120: remove 2.6.38 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31475 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
parent
05735d303b
commit
efae7066fc
@ -1,32 +0,0 @@
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -33,6 +33,21 @@ choice
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config ADM5120
|
||||
+ bool "Infineon/ADMtek ADM5120 SoC based machines"
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select IRQ_CPU
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
|
||||
+ select MIPS_MACHINE
|
||||
+
|
||||
config MIPS_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
select 64BIT_PHYS_ADDR
|
||||
@@ -737,6 +752,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
|
||||
|
||||
endchoice
|
||||
|
||||
+source "arch/mips/adm5120/Kconfig"
|
||||
source "arch/mips/alchemy/Kconfig"
|
||||
source "arch/mips/ath79/Kconfig"
|
||||
source "arch/mips/bcm63xx/Kconfig"
|
||||
@ -1,21 +0,0 @@
|
||||
--- a/drivers/mtd/maps/Kconfig
|
||||
+++ b/drivers/mtd/maps/Kconfig
|
||||
@@ -552,4 +552,8 @@ config MTD_PISMO
|
||||
|
||||
When built as a module, it will be called pismo.ko
|
||||
|
||||
+config MTD_ADM5120
|
||||
+ tristate "Map driver for ADM5120 based boards"
|
||||
+ depends on ADM5120
|
||||
+
|
||||
endmenu
|
||||
--- a/drivers/mtd/maps/Makefile
|
||||
+++ b/drivers/mtd/maps/Makefile
|
||||
@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
|
||||
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
|
||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
||||
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
|
||||
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
|
||||
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
|
||||
obj-$(CONFIG_MTD_IMPA7) += impa7.o
|
||||
@ -1,23 +0,0 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -494,6 +494,10 @@ config MIPS_AU1X00_ENET
|
||||
If you have an Alchemy Semi AU1X00 based system
|
||||
say Y. Otherwise, say N.
|
||||
|
||||
+config ADM5120_ENET
|
||||
+ tristate "ADM5120 Ethernet switch support"
|
||||
+ depends on ADM5120
|
||||
+
|
||||
config SGI_IOC3_ETH
|
||||
bool "SGI IOC3 Ethernet"
|
||||
depends on PCI && SGI_IP27
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -216,6 +216,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
|
||||
# This is also a 82596 and should probably be merged
|
||||
obj-$(CONFIG_LP486E) += lp486e.o
|
||||
|
||||
+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
|
||||
obj-$(CONFIG_ETH16I) += eth16i.o
|
||||
obj-$(CONFIG_ZORRO8390) += zorro8390.o
|
||||
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
|
||||
@ -1,33 +0,0 @@
|
||||
--- a/drivers/usb/Makefile
|
||||
+++ b/drivers/usb/Makefile
|
||||
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/
|
||||
obj-$(CONFIG_USB_MON) += mon/
|
||||
|
||||
obj-$(CONFIG_PCI) += host/
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += host/
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += host/
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -4,6 +4,10 @@
|
||||
comment "USB Host Controller Drivers"
|
||||
depends on USB
|
||||
|
||||
+config USB_ADM5120_HCD
|
||||
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
|
||||
+ depends on USB && ADM5120 && EXPERIMENTAL
|
||||
+
|
||||
config USB_C67X00_HCD
|
||||
tristate "Cypress C67x00 HCD support"
|
||||
depends on USB
|
||||
--- a/drivers/usb/host/Makefile
|
||||
+++ b/drivers/usb/host/Makefile
|
||||
@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/
|
||||
|
||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
||||
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
||||
@ -1,22 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
|
||||
+obj-$(CONFIG_ADM5120) += pci-adm5120.o
|
||||
|
||||
ifdef CONFIG_PCI_MSI
|
||||
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
|
||||
--- a/include/linux/pci_ids.h
|
||||
+++ b/include/linux/pci_ids.h
|
||||
@@ -1773,6 +1773,9 @@
|
||||
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
|
||||
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
|
||||
|
||||
+#define PCI_VENDOR_ID_ADMTEK 0x1317
|
||||
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
|
||||
+
|
||||
#define PCI_VENDOR_ID_SIIG 0x131f
|
||||
#define PCI_SUBVENDOR_ID_SIIG 0x131f
|
||||
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
|
||||
@ -1,22 +0,0 @@
|
||||
--- a/drivers/leds/Kconfig
|
||||
+++ b/drivers/leds/Kconfig
|
||||
@@ -457,4 +457,12 @@ config LEDS_TRIGGER_USBDEV
|
||||
This allows LEDs to be controlled by the presence/activity of
|
||||
an USB device. If unsure, say N.
|
||||
|
||||
+config LEDS_TRIGGER_ADM5120_SWITCH
|
||||
+ tristate "LED ADM5120 Switch Port Status Trigger"
|
||||
+ depends on LEDS_TRIGGERS && ADM5120
|
||||
+ help
|
||||
+ This allows LEDs to be controlled by the port states of
|
||||
+ the ADM5120 built-in Ethernet Switch
|
||||
+ If unsure, say N.
|
||||
+
|
||||
endif # NEW_LEDS
|
||||
--- a/drivers/leds/Makefile
|
||||
+++ b/drivers/leds/Makefile
|
||||
@@ -55,3 +55,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) +=
|
||||
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o
|
||||
+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
|
||||
@ -1,53 +0,0 @@
|
||||
--- a/drivers/usb/host/adm5120-hcd.c
|
||||
+++ b/drivers/usb/host/adm5120-hcd.c
|
||||
@@ -32,6 +32,7 @@
|
||||
#include <linux/list.h>
|
||||
#include <linux/usb.h>
|
||||
#include <linux/usb/otg.h>
|
||||
+#include <linux/usb/hcd.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/dmapool.h>
|
||||
#include <linux/reboot.h>
|
||||
@@ -43,8 +44,6 @@
|
||||
#include <asm/unaligned.h>
|
||||
#include <asm/byteorder.h>
|
||||
|
||||
-#include "../core/hcd.h"
|
||||
-#include "../core/hub.h"
|
||||
|
||||
#define DRIVER_VERSION "0.27.0"
|
||||
#define DRIVER_AUTHOR "Gabor Juhos <juhosg@openwrt.org>"
|
||||
@@ -571,7 +570,7 @@ static int admhc_run(struct admhcd *ahcd
|
||||
periodic_reinit(ahcd);
|
||||
|
||||
/* use rhsc irqs after khubd is fully initialized */
|
||||
- hcd->poll_rh = 1;
|
||||
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
||||
hcd->uses_new_polling = 1;
|
||||
|
||||
#if 0
|
||||
@@ -688,7 +687,7 @@ static irqreturn_t admhc_irq(struct usb_
|
||||
*/
|
||||
admhc_vdbg(ahcd, "Resume Detect\n");
|
||||
admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
|
||||
- hcd->poll_rh = 1;
|
||||
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
||||
if (ahcd->autostop) {
|
||||
spin_lock(&ahcd->lock);
|
||||
admhc_rh_resume(ahcd);
|
||||
--- a/drivers/usb/host/adm5120-hub.c
|
||||
+++ b/drivers/usb/host/adm5120-hub.c
|
||||
@@ -106,8 +106,11 @@ admhc_hub_status_data(struct usb_hcd *hc
|
||||
}
|
||||
}
|
||||
|
||||
- hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
|
||||
- any_connected);
|
||||
+ if (admhc_root_hub_state_changes(ahcd, changed,
|
||||
+ any_connected))
|
||||
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
||||
+ else
|
||||
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
||||
|
||||
done:
|
||||
spin_unlock_irqrestore(&ahcd->lock, flags);
|
||||
@ -1,84 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -48,6 +48,12 @@
|
||||
#define SST49LF008A 0x005a
|
||||
#define AT49BV6416 0x00d6
|
||||
|
||||
+/* Macronix */
|
||||
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
|
||||
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
|
||||
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
|
||||
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
|
||||
+
|
||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
@@ -345,6 +351,41 @@ static struct cfi_fixup cfi_nopri_fixup_
|
||||
{ 0, 0, NULL }
|
||||
};
|
||||
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+/*
|
||||
+ * Some Macronix chips has no/bad bootblock information in the CFI table
|
||||
+ */
|
||||
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
|
||||
+{
|
||||
+ struct map_info *map = mtd->priv;
|
||||
+ struct cfi_private *cfi = map->fldrv_priv;
|
||||
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
|
||||
+ __u8 t;
|
||||
+
|
||||
+ switch (cfi->id) {
|
||||
+ /* TODO: put affected chip ids here */
|
||||
+ case MX29LV160B:
|
||||
+ case MX29LV320B:
|
||||
+ t = 2; /* Bottom boot */
|
||||
+ break;
|
||||
+ case MX29LV160T:
|
||||
+ case MX29LV320T:
|
||||
+ t = 3; /* Top boot */
|
||||
+ break;
|
||||
+ default:
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ if (extp->TopBottom == t)
|
||||
+ /* boot location detected by the CFI layer is correct */
|
||||
+ return;
|
||||
+
|
||||
+ extp->TopBottom = t;
|
||||
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
|
||||
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
|
||||
+}
|
||||
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
|
||||
+
|
||||
static struct cfi_fixup cfi_fixup_table[] = {
|
||||
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri },
|
||||
#ifdef AMD_BOOTLOC_BUG
|
||||
@@ -385,6 +426,9 @@ static struct cfi_fixup fixup_table[] =
|
||||
*/
|
||||
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip },
|
||||
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock },
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
|
||||
+#endif
|
||||
{ 0, 0, NULL }
|
||||
};
|
||||
|
||||
--- a/drivers/mtd/chips/Kconfig
|
||||
+++ b/drivers/mtd/chips/Kconfig
|
||||
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
|
||||
provides support for one of those command sets, used on chips
|
||||
including the AMD Am29LV320.
|
||||
|
||||
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ bool "Fix boot-block location for Macronix flash chips"
|
||||
+ depends on MTD_CFI_AMDSTD
|
||||
+ help
|
||||
+ Some Macronix flash chips have no/wrong boot-block location in the
|
||||
+ CFI table, and the driver may detect the type incorrectly. Select
|
||||
+ this if your board has such chip.
|
||||
+
|
||||
config MTD_CFI_STAA
|
||||
tristate "Support for ST (Advanced Architecture) flash chips"
|
||||
depends on MTD_GEN_PROBE
|
||||
@ -1,68 +0,0 @@
|
||||
--- a/drivers/mtd/chips/jedec_probe.c
|
||||
+++ b/drivers/mtd/chips/jedec_probe.c
|
||||
@@ -115,6 +115,10 @@
|
||||
#define UPD29F064115 0x221C
|
||||
|
||||
/* PMC */
|
||||
+#define PM39LV512 0x001B
|
||||
+#define PM39LV010 0x001C
|
||||
+#define PM39LV020 0x003D
|
||||
+#define PM39LV040 0x003E
|
||||
#define PM49FL002 0x006D
|
||||
#define PM49FL004 0x006E
|
||||
#define PM49FL008 0x006A
|
||||
@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
|
||||
ERASEINFO(0x02000,2),
|
||||
ERASEINFO(0x04000,1),
|
||||
}
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV512,
|
||||
+ .name = "PMC Pm39LV512",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_64KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,16),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV010,
|
||||
+ .name = "PMC Pm39LV010",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_128KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,32),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV020,
|
||||
+ .name = "PMC Pm39LV020",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_256KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,64),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = CFI_MFR_PMC,
|
||||
+ .dev_id = PM39LV040,
|
||||
+ .name = "PMC Pm39LV040",
|
||||
+ .devtypes = CFI_DEVICETYPE_X8,
|
||||
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
|
||||
+ .dev_size = SIZE_512KiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,128),
|
||||
+ }
|
||||
}, {
|
||||
.mfr_id = CFI_MFR_PMC,
|
||||
.dev_id = PM49FL002,
|
||||
@ -1,24 +0,0 @@
|
||||
--- a/drivers/mtd/Kconfig
|
||||
+++ b/drivers/mtd/Kconfig
|
||||
@@ -65,6 +65,11 @@ config MTD_ROOTFS_SPLIT
|
||||
depends on MTD_PARTITIONS
|
||||
default y
|
||||
|
||||
+config MTD_TRXSPLIT
|
||||
+ bool "Automatically find and split TRX partitions"
|
||||
+ depends on MTD_PARTITIONS
|
||||
+ default n
|
||||
+
|
||||
config MTD_REDBOOT_PARTS
|
||||
tristate "RedBoot partition table parsing"
|
||||
---help---
|
||||
--- a/drivers/mtd/Makefile
|
||||
+++ b/drivers/mtd/Makefile
|
||||
@@ -9,6 +9,7 @@ mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.
|
||||
mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o
|
||||
|
||||
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
||||
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
@ -1,28 +0,0 @@
|
||||
--- a/drivers/ata/Makefile
|
||||
+++ b/drivers/ata/Makefile
|
||||
@@ -87,6 +87,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
|
||||
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
||||
obj-$(CONFIG_PATA_QDI) += pata_qdi.o
|
||||
+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
|
||||
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
||||
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
||||
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
|
||||
--- a/drivers/ata/Kconfig
|
||||
+++ b/drivers/ata/Kconfig
|
||||
@@ -806,6 +806,15 @@ config PATA_QDI
|
||||
help
|
||||
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
|
||||
|
||||
+config PATA_RB153_CF
|
||||
+ tristate "RouterBOARD 153 Compact Flash support"
|
||||
+ depends on ADM5120_MACH_RB_153
|
||||
+ help
|
||||
+ This option enables support for a Compact Flash connected on
|
||||
+ the RouterBOARD 153.
|
||||
+
|
||||
+ If unsure, say N.
|
||||
+
|
||||
config PATA_RB532
|
||||
tristate "RouterBoard 532 PATA CompactFlash support"
|
||||
depends on MIKROTIK_RB532
|
||||
@ -1,378 +0,0 @@
|
||||
--- a/drivers/tty/serial/amba-pl010.c
|
||||
+++ b/drivers/tty/serial/amba-pl010.c
|
||||
@@ -51,11 +51,10 @@
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
-#define UART_NR 8
|
||||
-
|
||||
#define SERIAL_AMBA_MAJOR 204
|
||||
#define SERIAL_AMBA_MINOR 16
|
||||
-#define SERIAL_AMBA_NR UART_NR
|
||||
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
||||
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
|
||||
|
||||
#define AMBA_ISR_PASS_LIMIT 256
|
||||
|
||||
@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~UART010_CR_TIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_start_tx(struct uart_port *port)
|
||||
@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_TIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_stop_rx(struct uart_port *port)
|
||||
@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_enable_ms(struct uart_port *port)
|
||||
@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_MSIE;
|
||||
- writel(cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
|
||||
static void pl010_rx_chars(struct uart_amba_port *uap)
|
||||
@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
struct tty_struct *tty = uap->port.state->port.tty;
|
||||
unsigned int status, ch, flag, rsr, max_count = 256;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
while (UART_RX_DATA(status) && max_count--) {
|
||||
- ch = readb(uap->port.membase + UART01x_DR);
|
||||
+ ch = __raw_readl(uap->port.membase + UART01x_DR);
|
||||
flag = TTY_NORMAL;
|
||||
|
||||
uap->port.icount.rx++;
|
||||
@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
||||
- writel(0, uap->port.membase + UART01x_ECR);
|
||||
+ __raw_writel(0, uap->port.membase + UART01x_ECR);
|
||||
|
||||
if (rsr & UART01x_RSR_BE) {
|
||||
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
|
||||
@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
||||
|
||||
ignore_char:
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
}
|
||||
spin_unlock(&uap->port.lock);
|
||||
tty_flip_buffer_push(tty);
|
||||
@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
|
||||
int count;
|
||||
|
||||
if (uap->port.x_char) {
|
||||
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
||||
uap->port.icount.tx++;
|
||||
uap->port.x_char = 0;
|
||||
return;
|
||||
@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
|
||||
|
||||
count = uap->port.fifosize >> 1;
|
||||
do {
|
||||
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
uap->port.icount.tx++;
|
||||
if (uart_circ_empty(xmit))
|
||||
@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
|
||||
{
|
||||
unsigned int status, delta;
|
||||
|
||||
- writel(0, uap->port.membase + UART010_ICR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_ICR);
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
delta = status ^ uap->old_status;
|
||||
uap->old_status = status;
|
||||
@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
|
||||
spin_lock(&uap->port.lock);
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
||||
if (status) {
|
||||
do {
|
||||
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
||||
@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
if (pass_counter-- == 0)
|
||||
break;
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = __raw_readl(uap->port.membase + UART010_IIR);
|
||||
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
||||
UART010_IIR_TIS));
|
||||
handled = 1;
|
||||
@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
static unsigned int pl010_tx_empty(struct uart_port *port)
|
||||
{
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
||||
+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
|
||||
unsigned int result = 0;
|
||||
unsigned int status;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
if (status & UART01x_FR_DCD)
|
||||
result |= TIOCM_CAR;
|
||||
if (status & UART01x_FR_DSR)
|
||||
@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
|
||||
unsigned int lcr_h;
|
||||
|
||||
spin_lock_irqsave(&uap->port.lock, flags);
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
||||
if (break_state == -1)
|
||||
lcr_h |= UART01x_LCRH_BRK;
|
||||
else
|
||||
lcr_h &= ~UART01x_LCRH_BRK;
|
||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||||
}
|
||||
|
||||
@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
|
||||
/*
|
||||
* initialise the old status of the modem signals
|
||||
*/
|
||||
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
/*
|
||||
* Finally, enable interrupts
|
||||
*/
|
||||
- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
||||
+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
||||
uap->port.membase + UART010_CR);
|
||||
|
||||
return 0;
|
||||
@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
|
||||
/*
|
||||
* disable all interrupts, disable the port
|
||||
*/
|
||||
- writel(0, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* disable break condition and fifos */
|
||||
- writel(readb(uap->port.membase + UART010_LCRH) &
|
||||
+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
|
||||
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
||||
uap->port.membase + UART010_LCRH);
|
||||
|
||||
@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
|
||||
/*
|
||||
* Ask the core to calculate the divisor for us.
|
||||
*/
|
||||
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
|
||||
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
||||
|
||||
/* first, disable everything */
|
||||
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
|
||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
||||
old_cr |= UART010_CR_MSIE;
|
||||
|
||||
- writel(0, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* Set baud rate */
|
||||
quot -= 1;
|
||||
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
||||
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
||||
+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
||||
+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
||||
|
||||
/*
|
||||
* ----------v----------v----------v----------v-----
|
||||
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
|
||||
* ----------^----------^----------^----------^-----
|
||||
*/
|
||||
- writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
|
||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
||||
|
||||
spin_unlock_irqrestore(&uap->port.lock, flags);
|
||||
}
|
||||
@@ -549,7 +548,7 @@ static struct uart_ops amba_pl010_pops =
|
||||
.verify_port = pl010_verify_port,
|
||||
};
|
||||
|
||||
-static struct uart_amba_port *amba_ports[UART_NR];
|
||||
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
||||
|
||||
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
||||
|
||||
@@ -559,10 +558,10 @@ static void pl010_console_putchar(struct
|
||||
unsigned int status;
|
||||
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (!UART_TX_READY(status));
|
||||
- writel(ch, uap->port.membase + UART01x_DR);
|
||||
+ __raw_writel(ch, uap->port.membase + UART01x_DR);
|
||||
}
|
||||
|
||||
static void
|
||||
@@ -576,8 +575,8 @@ pl010_console_write(struct console *co,
|
||||
/*
|
||||
* First save the CR then disable the interrupts
|
||||
*/
|
||||
- old_cr = readb(uap->port.membase + UART010_CR);
|
||||
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
|
||||
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
||||
|
||||
@@ -586,10 +585,10 @@ pl010_console_write(struct console *co,
|
||||
* and restore the TCR
|
||||
*/
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = __raw_readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (status & UART01x_FR_BUSY);
|
||||
- writel(old_cr, uap->port.membase + UART010_CR);
|
||||
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
|
||||
|
||||
clk_disable(uap->clk);
|
||||
}
|
||||
@@ -598,9 +597,9 @@ static void __init
|
||||
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
||||
int *parity, int *bits)
|
||||
{
|
||||
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
unsigned int lcr_h, quot;
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
|
||||
|
||||
*parity = 'n';
|
||||
if (lcr_h & UART01x_LCRH_PEN) {
|
||||
@@ -615,8 +614,8 @@ pl010_console_get_options(struct uart_am
|
||||
else
|
||||
*bits = 8;
|
||||
|
||||
- quot = readb(uap->port.membase + UART010_LCRL) |
|
||||
- readb(uap->port.membase + UART010_LCRM) << 8;
|
||||
+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
|
||||
+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
|
||||
*baud = uap->port.uartclk / (16 * (quot + 1));
|
||||
}
|
||||
}
|
||||
@@ -634,7 +633,7 @@ static int __init pl010_console_setup(st
|
||||
* if so, search for the first available port that does have
|
||||
* console support.
|
||||
*/
|
||||
- if (co->index >= UART_NR)
|
||||
+ if (co->index >= SERIAL_AMBA_NR)
|
||||
co->index = 0;
|
||||
uap = amba_ports[co->index];
|
||||
if (!uap)
|
||||
@@ -652,7 +651,7 @@ static int __init pl010_console_setup(st
|
||||
|
||||
static struct uart_driver amba_reg;
|
||||
static struct console amba_console = {
|
||||
- .name = "ttyAM",
|
||||
+ .name = SERIAL_AMBA_NAME,
|
||||
.write = pl010_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = pl010_console_setup,
|
||||
@@ -668,11 +667,11 @@ static struct console amba_console = {
|
||||
|
||||
static struct uart_driver amba_reg = {
|
||||
.owner = THIS_MODULE,
|
||||
- .driver_name = "ttyAM",
|
||||
- .dev_name = "ttyAM",
|
||||
+ .driver_name = SERIAL_AMBA_NAME,
|
||||
+ .dev_name = SERIAL_AMBA_NAME,
|
||||
.major = SERIAL_AMBA_MAJOR,
|
||||
.minor = SERIAL_AMBA_MINOR,
|
||||
- .nr = UART_NR,
|
||||
+ .nr = SERIAL_AMBA_NR,
|
||||
.cons = AMBA_CONSOLE,
|
||||
};
|
||||
|
||||
--- a/drivers/tty/serial/Kconfig
|
||||
+++ b/drivers/tty/serial/Kconfig
|
||||
@@ -276,10 +276,25 @@ config SERIAL_AMBA_PL010
|
||||
help
|
||||
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
||||
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
||||
- Cirrus Logic EP93xx CPU, say Y or M here.
|
||||
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config SERIAL_AMBA_PL010_NUMPORTS
|
||||
+ int "Maximum number of AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "8"
|
||||
+ ---help---
|
||||
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
||||
+ to support.
|
||||
+
|
||||
+config SERIAL_AMBA_PL010_PORTNAME
|
||||
+ string "Name of the AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "ttyAM"
|
||||
+ ---help---
|
||||
+ ::: To be written :::
|
||||
+
|
||||
config SERIAL_AMBA_PL010_CONSOLE
|
||||
bool "Support for console on AMBA serial port"
|
||||
depends on SERIAL_AMBA_PL010=y
|
||||
@ -1,13 +0,0 @@
|
||||
--- a/drivers/amba/bus.c
|
||||
+++ b/drivers/amba/bus.c
|
||||
@@ -18,6 +18,10 @@
|
||||
#include <asm/irq.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
+#ifndef NO_IRQ
|
||||
+#define NO_IRQ (-1)
|
||||
+#endif
|
||||
+
|
||||
#define to_amba_device(d) container_of(d, struct amba_device, dev)
|
||||
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
|
||||
|
||||
@ -1,27 +0,0 @@
|
||||
--- a/drivers/leds/leds-gpio.c
|
||||
+++ b/drivers/leds/leds-gpio.c
|
||||
@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
|
||||
container_of(led_cdev, struct gpio_led_data, cdev);
|
||||
int level;
|
||||
|
||||
- if (value == LED_OFF)
|
||||
- level = 0;
|
||||
- else
|
||||
- level = 1;
|
||||
-
|
||||
- if (led_dat->active_low)
|
||||
- level = !level;
|
||||
+ switch (value) {
|
||||
+ case LED_OFF:
|
||||
+ level = led_dat->active_low ? 1 : 0;
|
||||
+ break;
|
||||
+ case LED_FULL:
|
||||
+ level = led_dat->active_low ? 0 : 1;
|
||||
+ break;
|
||||
+ default:
|
||||
+ level = value;
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
/* Setting GPIOs with I2C/etc requires a task context, and we don't
|
||||
* seem to have a reliable way to know if we're already in one; so
|
||||
@ -1,31 +0,0 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -894,6 +894,18 @@ config RC32434_WDT
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called rc32434_wdt.
|
||||
|
||||
+config ADM5120_WDT
|
||||
+ tristate "Infineon ADM5120 SoC hardware watchdog"
|
||||
+ depends on WATCHDOG && ADM5120
|
||||
+ help
|
||||
+ This is a driver for hardware watchdog integrated in Infineon
|
||||
+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
|
||||
+ it doesn't freeze, and if it does, it reboots your computer after a
|
||||
+ certain amount of time.
|
||||
+
|
||||
+ To compile this driver as a module, choose M here: the module will be
|
||||
+ called adm5120_wdt.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on SGI_HAS_INDYDOG
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -113,6 +113,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
|
||||
obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
|
||||
obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
|
||||
obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
|
||||
+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
|
||||
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/drivers/usb/host/adm5120-dbg.c
|
||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
||||
@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
|
||||
|
||||
#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
|
||||
do { \
|
||||
- if (next) { \
|
||||
+ if (next != NULL) { \
|
||||
unsigned s_len; \
|
||||
s_len = scnprintf(*next, *size, format, ## arg); \
|
||||
*size -= s_len; *next += s_len; \
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/drivers/usb/host/adm5120-dbg.c
|
||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
||||
@@ -644,7 +644,7 @@ static ssize_t fill_registers_buffer(str
|
||||
hcd->product_desc,
|
||||
hcd_name);
|
||||
|
||||
- if (bus->controller->power.power_state.event) {
|
||||
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
|
||||
size -= scnprintf(next, size,
|
||||
"SUSPENDED (no register access)\n");
|
||||
goto done;
|
||||
@ -1,116 +0,0 @@
|
||||
--- a/drivers/usb/host/adm5120-dbg.c
|
||||
+++ b/drivers/usb/host/adm5120-dbg.c
|
||||
@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
|
||||
|
||||
struct debug_buffer {
|
||||
ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
|
||||
- struct device *dev;
|
||||
+ struct admhcd *ahcd;
|
||||
struct mutex mutex; /* protect filling of buffer */
|
||||
size_t count; /* number of characters filled into buffer */
|
||||
char *page;
|
||||
@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
|
||||
|
||||
static ssize_t fill_async_buffer(struct debug_buffer *buf)
|
||||
{
|
||||
- struct usb_bus *bus;
|
||||
- struct usb_hcd *hcd;
|
||||
struct admhcd *ahcd;
|
||||
size_t temp;
|
||||
unsigned long flags;
|
||||
|
||||
- bus = dev_get_drvdata(buf->dev);
|
||||
- hcd = bus_to_hcd(bus);
|
||||
- ahcd = hcd_to_admhcd(hcd);
|
||||
+ ahcd = buf->ahcd;
|
||||
|
||||
spin_lock_irqsave(&ahcd->lock, flags);
|
||||
temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
|
||||
@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
|
||||
|
||||
static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
|
||||
{
|
||||
- struct usb_bus *bus;
|
||||
- struct usb_hcd *hcd;
|
||||
struct admhcd *ahcd;
|
||||
struct ed **seen, *ed;
|
||||
unsigned long flags;
|
||||
@@ -530,9 +524,7 @@ static ssize_t fill_periodic_buffer(stru
|
||||
return 0;
|
||||
seen_count = 0;
|
||||
|
||||
- bus = dev_get_drvdata(buf->dev);
|
||||
- hcd = bus_to_hcd(bus);
|
||||
- ahcd = hcd_to_admhcd(hcd);
|
||||
+ ahcd = buf->ahcd;
|
||||
next = buf->page;
|
||||
size = PAGE_SIZE;
|
||||
|
||||
@@ -615,7 +607,6 @@ static ssize_t fill_periodic_buffer(stru
|
||||
|
||||
static ssize_t fill_registers_buffer(struct debug_buffer *buf)
|
||||
{
|
||||
- struct usb_bus *bus;
|
||||
struct usb_hcd *hcd;
|
||||
struct admhcd *ahcd;
|
||||
struct admhcd_regs __iomem *regs;
|
||||
@@ -624,9 +615,8 @@ static ssize_t fill_registers_buffer(str
|
||||
char *next;
|
||||
u32 rdata;
|
||||
|
||||
- bus = dev_get_drvdata(buf->dev);
|
||||
- hcd = bus_to_hcd(bus);
|
||||
- ahcd = hcd_to_admhcd(hcd);
|
||||
+ ahcd = buf->ahcd;
|
||||
+ hcd = admhcd_to_hcd(ahcd);
|
||||
regs = ahcd->regs;
|
||||
next = buf->page;
|
||||
size = PAGE_SIZE;
|
||||
@@ -691,7 +681,7 @@ done:
|
||||
}
|
||||
|
||||
|
||||
-static struct debug_buffer *alloc_buffer(struct device *dev,
|
||||
+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
|
||||
ssize_t (*fill_func)(struct debug_buffer *))
|
||||
{
|
||||
struct debug_buffer *buf;
|
||||
@@ -699,7 +689,7 @@ static struct debug_buffer *alloc_buffer
|
||||
buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
|
||||
|
||||
if (buf) {
|
||||
- buf->dev = dev;
|
||||
+ buf->ahcd = ahcd;
|
||||
buf->fill_func = fill_func;
|
||||
mutex_init(&buf->mutex);
|
||||
}
|
||||
@@ -792,26 +782,25 @@ static int debug_registers_open(struct i
|
||||
static inline void create_debug_files(struct admhcd *ahcd)
|
||||
{
|
||||
struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
|
||||
- struct device *dev = bus->dev;
|
||||
|
||||
ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
|
||||
if (!ahcd->debug_dir)
|
||||
goto dir_error;
|
||||
|
||||
ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
|
||||
- ahcd->debug_dir, dev,
|
||||
+ ahcd->debug_dir, ahcd,
|
||||
&debug_async_fops);
|
||||
if (!ahcd->debug_async)
|
||||
goto async_error;
|
||||
|
||||
ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
|
||||
- ahcd->debug_dir, dev,
|
||||
+ ahcd->debug_dir, ahcd,
|
||||
&debug_periodic_fops);
|
||||
if (!ahcd->debug_periodic)
|
||||
goto periodic_error;
|
||||
|
||||
ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
|
||||
- ahcd->debug_dir, dev,
|
||||
+ ahcd->debug_dir, ahcd,
|
||||
&debug_registers_fops);
|
||||
if (!ahcd->debug_registers)
|
||||
goto registers_error;
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/drivers/net/adm5120sw.c
|
||||
+++ b/drivers/net/adm5120sw.c
|
||||
@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis
|
||||
t |= (ports << CPUP_CONF_DUNP_SHIFT);
|
||||
|
||||
if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
|
||||
- dev->mc_count)
|
||||
+ netdev_mc_count(dev))
|
||||
/* enable multicast packets */
|
||||
t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
|
||||
else
|
||||
@ -1,119 +0,0 @@
|
||||
--- a/arch/mips/include/asm/war.h
|
||||
+++ b/arch/mips/include/asm/war.h
|
||||
@@ -9,7 +9,7 @@
|
||||
#ifndef _ASM_WAR_H
|
||||
#define _ASM_WAR_H
|
||||
|
||||
-#include <war.h>
|
||||
+#include <asm/mach-adm5120/war.h>
|
||||
|
||||
/*
|
||||
* Work around certain R4000 CPU errata (as implemented by GCC):
|
||||
--- a/drivers/amba/bus.c
|
||||
+++ b/drivers/amba/bus.c
|
||||
@@ -16,7 +16,7 @@
|
||||
#include <linux/amba/bus.h>
|
||||
|
||||
#include <asm/irq.h>
|
||||
-#include <asm/sizes.h>
|
||||
+#include <asm/mach-adm5120/asm/sizes.h>
|
||||
|
||||
#ifndef NO_IRQ
|
||||
#define NO_IRQ (-1)
|
||||
--- a/drivers/watchdog/adm5120_wdt.c
|
||||
+++ b/drivers/watchdog/adm5120_wdt.c
|
||||
@@ -166,7 +166,7 @@ static const struct file_operations wdt_
|
||||
.owner = THIS_MODULE,
|
||||
.llseek = no_llseek,
|
||||
.write = wdt_write,
|
||||
- .ioctl = wdt_ioctl,
|
||||
+ .unlocked_ioctl = wdt_ioctl,
|
||||
.open = wdt_open,
|
||||
.release = wdt_release,
|
||||
};
|
||||
--- a/arch/mips/Kbuild.platforms
|
||||
+++ b/arch/mips/Kbuild.platforms
|
||||
@@ -1,5 +1,6 @@
|
||||
# All platforms listed in alphabetic order
|
||||
|
||||
+platforms += adm5120
|
||||
platforms += alchemy
|
||||
platforms += ar7
|
||||
platforms += ath79
|
||||
--- a/drivers/net/adm5120sw.c
|
||||
+++ b/drivers/net/adm5120sw.c
|
||||
@@ -26,6 +26,7 @@
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
+#include <asm/mach-adm5120/irq.h>
|
||||
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/etherdevice.h>
|
||||
--- a/arch/mips/adm5120/common/clock.c
|
||||
+++ b/arch/mips/adm5120/common/clock.c
|
||||
@@ -33,7 +33,7 @@ static struct clk uart_clk = {
|
||||
|
||||
struct clk *clk_get(struct device *dev, const char *id)
|
||||
{
|
||||
- char *name = dev_name(dev);
|
||||
+ const char *name = dev_name(dev);
|
||||
|
||||
if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
|
||||
return &uart_clk;
|
||||
--- /dev/null
|
||||
+++ b/arch/mips/adm5120/Platform
|
||||
@@ -0,0 +1,53 @@
|
||||
+#
|
||||
+# Core Infineon/ADMtek ADM5120
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120) += adm5120/common/
|
||||
+
|
||||
+#
|
||||
+# OEM CELLVISION
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/
|
||||
+
|
||||
+#
|
||||
+# OEM COMPEX
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/
|
||||
+
|
||||
+#
|
||||
+# OEM EDIMAX
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/
|
||||
+
|
||||
+#
|
||||
+# OEM GENERIC
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/
|
||||
+
|
||||
+#
|
||||
+# OEM INFINEON
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/
|
||||
+
|
||||
+#
|
||||
+# OEM MIKROTIK
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/
|
||||
+
|
||||
+#
|
||||
+# OEM MOTOROLA
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/
|
||||
+
|
||||
+#
|
||||
+# OEM OSBRIDGE
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/
|
||||
+
|
||||
+#
|
||||
+# OEM ZYXEL
|
||||
+#
|
||||
+platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/
|
||||
+
|
||||
+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
|
||||
+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
|
||||
+load-$(CONFIG_ADM5120) += 0xffffffff80001000
|
||||
@ -1,275 +0,0 @@
|
||||
CONFIG_32BIT=y
|
||||
CONFIG_ADM5120=y
|
||||
CONFIG_ADM5120_ENET=y
|
||||
CONFIG_ADM5120_MACH_5GXI=y
|
||||
CONFIG_ADM5120_MACH_BR_6104K=y
|
||||
CONFIG_ADM5120_MACH_BR_6104KP=y
|
||||
CONFIG_ADM5120_MACH_BR_61X4WG=y
|
||||
CONFIG_ADM5120_MACH_CAS_771=y
|
||||
CONFIG_ADM5120_MACH_EASY5120P_ATA=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_RT=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
|
||||
CONFIG_ADM5120_MACH_EASY83000=y
|
||||
CONFIG_ADM5120_MACH_EB_214A=y
|
||||
CONFIG_ADM5120_MACH_NFS_101=y
|
||||
CONFIG_ADM5120_MACH_NP27G=y
|
||||
CONFIG_ADM5120_MACH_NP28G=y
|
||||
CONFIG_ADM5120_MACH_PMUGW=y
|
||||
CONFIG_ADM5120_MACH_RB_11X=y
|
||||
CONFIG_ADM5120_MACH_RB_133=y
|
||||
CONFIG_ADM5120_MACH_RB_133C=y
|
||||
CONFIG_ADM5120_MACH_RB_150=y
|
||||
CONFIG_ADM5120_MACH_RB_153=y
|
||||
CONFIG_ADM5120_MACH_RB_192=y
|
||||
CONFIG_ADM5120_MACH_WP54=y
|
||||
CONFIG_ADM5120_OEM_CELLVISION=y
|
||||
CONFIG_ADM5120_OEM_COMPEX=y
|
||||
CONFIG_ADM5120_OEM_EDIMAX=y
|
||||
CONFIG_ADM5120_OEM_GENERIC=y
|
||||
CONFIG_ADM5120_OEM_INFINEON=y
|
||||
CONFIG_ADM5120_OEM_MIKROTIK=y
|
||||
CONFIG_ADM5120_OEM_MOTOROLA=y
|
||||
CONFIG_ADM5120_OEM_OSBRIDGE=y
|
||||
# CONFIG_ADM5120_OEM_ZYXEL is not set
|
||||
CONFIG_ADM5120_SOC_BGA=y
|
||||
CONFIG_ADM5120_WDT=y
|
||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
||||
# CONFIG_AR7 is not set
|
||||
# CONFIG_ATH79 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||
CONFIG_ATA=m
|
||||
# CONFIG_ATH79 is not set
|
||||
# CONFIG_BCM47XX is not set
|
||||
# CONFIG_BCM63XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CRYPTO=m
|
||||
CONFIG_CRYPTO_AEAD2=m
|
||||
CONFIG_CRYPTO_AES=m
|
||||
CONFIG_CRYPTO_ALGAPI=m
|
||||
CONFIG_CRYPTO_ALGAPI2=m
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRYPTO_BLKCIPHER=m
|
||||
CONFIG_CRYPTO_BLKCIPHER2=m
|
||||
CONFIG_CRYPTO_ECB=m
|
||||
CONFIG_CRYPTO_HASH=m
|
||||
CONFIG_CRYPTO_HASH2=m
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
CONFIG_CRYPTO_MANAGER2=m
|
||||
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_PCOMP2=m
|
||||
CONFIG_CRYPTO_RNG2=m
|
||||
CONFIG_CRYPTO_WORKQUEUE=m
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FANOTIFY is not set
|
||||
# CONFIG_FIREWIRE_NOSY is not set
|
||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
# CONFIG_GPIO_PL061 is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HARDLOCKUP_DETECTOR is not set
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HID=m
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HOSTAP=m
|
||||
CONFIG_HOSTAP_FIRMWARE=y
|
||||
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
|
||||
CONFIG_HOSTAP_PCI=m
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
CONFIG_INPUT=m
|
||||
# CONFIG_INPUT_GPIO_BUTTONS is not set
|
||||
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
CONFIG_LIB80211=m
|
||||
CONFIG_LIB80211_CRYPT_CCMP=m
|
||||
CONFIG_LIB80211_CRYPT_TKIP=m
|
||||
CONFIG_LIB80211_CRYPT_WEP=m
|
||||
# CONFIG_LOONGSON_MC146818 is not set
|
||||
CONFIG_LOONGSON_UART_BASE=y
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_JZ4740 is not set
|
||||
# CONFIG_MACH_LOONGSON is not set
|
||||
# CONFIG_MACH_TX39XX is not set
|
||||
# CONFIG_MACH_TX49XX is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
# CONFIG_MFD_SUPPORT is not set
|
||||
CONFIG_MII=m
|
||||
# CONFIG_MIKROTIK_RB532 is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ALCHEMY is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
CONFIG_MTD_ADM5120=y
|
||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_MYLOADER_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
CONFIG_MTD_TRXSPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
|
||||
CONFIG_NLATTR=y
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NO_HZ=y
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_NXP_STB220 is not set
|
||||
# CONFIG_NXP_STB225 is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_POWERTV is not set
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_DMA=y
|
||||
CONFIG_SCSI_MOD=m
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
# CONFIG_SERIAL_MFD_HSU is not set
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_AMBAKMI is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP28 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
CONFIG_SOFT_WATCHDOG=m
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_STACKTRACE_SUPPORT=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
||||
CONFIG_TRACING_SUPPORT=y
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_ADM5120_HCD=m
|
||||
CONFIG_USB_ARCH_HAS_EHCI=y
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
||||
# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
|
||||
# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
|
||||
CONFIG_YAFFS_DISABLE_TAGS_ECC=y
|
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
||||
# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
|
||||
CONFIG_YAFFS_FS=y
|
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_XATTR=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
# CONFIG_ZRAM is not set
|
||||
@ -1,275 +0,0 @@
|
||||
CONFIG_32BIT=y
|
||||
CONFIG_ADM5120=y
|
||||
CONFIG_ADM5120_ENET=y
|
||||
CONFIG_ADM5120_MACH_5GXI=y
|
||||
CONFIG_ADM5120_MACH_BR_6104K=y
|
||||
CONFIG_ADM5120_MACH_BR_6104KP=y
|
||||
CONFIG_ADM5120_MACH_BR_61X4WG=y
|
||||
CONFIG_ADM5120_MACH_CAS_771=y
|
||||
CONFIG_ADM5120_MACH_EASY5120P_ATA=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_RT=y
|
||||
CONFIG_ADM5120_MACH_EASY5120_WVOIP=y
|
||||
CONFIG_ADM5120_MACH_EASY83000=y
|
||||
CONFIG_ADM5120_MACH_EB_214A=y
|
||||
CONFIG_ADM5120_MACH_NFS_101=y
|
||||
CONFIG_ADM5120_MACH_NP27G=y
|
||||
CONFIG_ADM5120_MACH_NP28G=y
|
||||
CONFIG_ADM5120_MACH_PMUGW=y
|
||||
CONFIG_ADM5120_MACH_RB_11X=y
|
||||
CONFIG_ADM5120_MACH_RB_133=y
|
||||
CONFIG_ADM5120_MACH_RB_133C=y
|
||||
CONFIG_ADM5120_MACH_RB_150=y
|
||||
CONFIG_ADM5120_MACH_RB_153=y
|
||||
CONFIG_ADM5120_MACH_RB_192=y
|
||||
CONFIG_ADM5120_MACH_WP54=y
|
||||
CONFIG_ADM5120_OEM_CELLVISION=y
|
||||
CONFIG_ADM5120_OEM_COMPEX=y
|
||||
CONFIG_ADM5120_OEM_EDIMAX=y
|
||||
CONFIG_ADM5120_OEM_GENERIC=y
|
||||
CONFIG_ADM5120_OEM_INFINEON=y
|
||||
CONFIG_ADM5120_OEM_MIKROTIK=y
|
||||
CONFIG_ADM5120_OEM_MOTOROLA=y
|
||||
CONFIG_ADM5120_OEM_OSBRIDGE=y
|
||||
# CONFIG_ADM5120_OEM_ZYXEL is not set
|
||||
CONFIG_ADM5120_SOC_BGA=y
|
||||
CONFIG_ADM5120_WDT=y
|
||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
||||
# CONFIG_AR7 is not set
|
||||
# CONFIG_ATH79 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||
CONFIG_ATA=m
|
||||
# CONFIG_ATH79 is not set
|
||||
# CONFIG_BCM47XX is not set
|
||||
# CONFIG_BCM63XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
# CONFIG_CMDLINE_OVERRIDE is not set
|
||||
# CONFIG_CPU_BIG_ENDIAN is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_CRYPTO=m
|
||||
CONFIG_CRYPTO_AEAD2=m
|
||||
CONFIG_CRYPTO_AES=m
|
||||
CONFIG_CRYPTO_ALGAPI=m
|
||||
CONFIG_CRYPTO_ALGAPI2=m
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRYPTO_BLKCIPHER=m
|
||||
CONFIG_CRYPTO_BLKCIPHER2=m
|
||||
CONFIG_CRYPTO_ECB=m
|
||||
CONFIG_CRYPTO_HASH=m
|
||||
CONFIG_CRYPTO_HASH2=m
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
CONFIG_CRYPTO_MANAGER2=m
|
||||
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=m
|
||||
CONFIG_CRYPTO_PCOMP2=m
|
||||
CONFIG_CRYPTO_RNG2=m
|
||||
CONFIG_CRYPTO_WORKQUEUE=m
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FANOTIFY is not set
|
||||
# CONFIG_FIREWIRE_NOSY is not set
|
||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
# CONFIG_GPIO_PL061 is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HARDLOCKUP_DETECTOR is not set
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HID=m
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HOSTAP=m
|
||||
CONFIG_HOSTAP_FIRMWARE=y
|
||||
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
|
||||
CONFIG_HOSTAP_PCI=m
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
CONFIG_INPUT=m
|
||||
# CONFIG_INPUT_GPIO_BUTTONS is not set
|
||||
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
CONFIG_LIB80211=m
|
||||
CONFIG_LIB80211_CRYPT_CCMP=m
|
||||
CONFIG_LIB80211_CRYPT_TKIP=m
|
||||
CONFIG_LIB80211_CRYPT_WEP=m
|
||||
# CONFIG_LOONGSON_MC146818 is not set
|
||||
CONFIG_LOONGSON_UART_BASE=y
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_JZ4740 is not set
|
||||
# CONFIG_MACH_LOONGSON is not set
|
||||
# CONFIG_MACH_TX39XX is not set
|
||||
# CONFIG_MACH_TX49XX is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
# CONFIG_MFD_SUPPORT is not set
|
||||
CONFIG_MII=m
|
||||
# CONFIG_MIKROTIK_RB532 is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_ALCHEMY is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
CONFIG_MTD_ADM5120=y
|
||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_MYLOADER_PARTS=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_PLATFORM=y
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
CONFIG_MTD_TRXSPLIT=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
|
||||
CONFIG_NLATTR=y
|
||||
CONFIG_NLS=m
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NO_HZ=y
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_NXP_STB220 is not set
|
||||
# CONFIG_NXP_STB225 is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
# CONFIG_POWERTV is not set
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_DMA=y
|
||||
CONFIG_SCSI_MOD=m
|
||||
CONFIG_SCSI_WAIT_SCAN=m
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
|
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
# CONFIG_SERIAL_MFD_HSU is not set
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_AMBAKMI is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_PCIPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP28 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
CONFIG_SOFT_WATCHDOG=m
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_STACKTRACE_SUPPORT=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
||||
CONFIG_TRACING_SUPPORT=y
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB_ADM5120_HCD=m
|
||||
CONFIG_USB_ARCH_HAS_EHCI=y
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
CONFIG_USB_EHCI_HCD=m
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
# CONFIG_USB_UHCI_HCD is not set
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
||||
# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
|
||||
# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
|
||||
CONFIG_YAFFS_DISABLE_TAGS_ECC=y
|
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
||||
# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
|
||||
CONFIG_YAFFS_FS=y
|
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_XATTR=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
# CONFIG_ZRAM is not set
|
||||
Loading…
Reference in New Issue
Block a user