1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 03:01:09 +02:00

ar71xx: add preliminary support for the Buffalo WZR-HP-G300NH

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19150 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2010-01-15 12:08:03 +00:00
parent 361f44c9ae
commit f010cfd099
11 changed files with 304 additions and 5 deletions

View File

@ -96,6 +96,9 @@ get_status_led() {
wrt160nl)
status_led="wrt160nl:blue:wps"
;;
wzr-hp-g300nh)
status_led="wzr-hp-g300nh:green:router"
;;
esac;
}

View File

@ -100,6 +100,9 @@ ar71xx_board_name() {
*WRT400N)
name="wrt400n"
;;
*WZR-HP-W300NH)
name="wzr-hp-w300nh"
;;
*)
name="generic"
;;

View File

@ -68,7 +68,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
ap81 | ap83 | dir-600-a1 | dir-615-c1 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m | wzr-hp-g300nh)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1

View File

@ -36,6 +36,7 @@ CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@ -102,7 +103,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_NXP_74HC153 is not set
CONFIG_GPIO_NXP_74HC153=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
@ -149,7 +150,6 @@ CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MTD_AR91XX_FLASH=y
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y

View File

@ -38,6 +38,7 @@ CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@ -106,7 +107,7 @@ CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_NXP_74HC153 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_NXP_74HC153=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y

View File

@ -38,6 +38,7 @@ CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
CONFIG_AR71XX_NVRAM=y
CONFIG_AR71XX_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@ -107,7 +108,7 @@ CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_NXP_74HC153 is not set
CONFIG_GPIO_NXP_74HC153=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y

View File

@ -68,6 +68,14 @@ config AR71XX_MACH_AW_NR580
select AR71XX_DEV_LEDS_GPIO
default n
config AR71XX_MACH_WZR_HP_G300NH
bool "Buffalo WZR-HP-G300NH board support"
select AR71XX_DEV_AR913X_WMAC
select AR71XX_DEV_GPIO_BUTTONS
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
default y
config AR71XX_MACH_GENERIC
bool "Generic AR71xx based machine support"
default y

View File

@ -48,3 +48,4 @@ obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o

View File

@ -0,0 +1,264 @@
/*
* Buffalo WZR-HP-G300NH board support
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/nxp_74hc153.h>
#include <linux/rtl8366_smi.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/ar91xx_flash.h>
#include "machtype.h"
#include "devices.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#define WZRHPG300NH_GPIO_LED_USB 0
#define WZRHPG300NH_GPIO_LED_DIAG 1
#define WZRHPG300NH_GPIO_LED_WIRELESS 6
#define WZRHPG300NH_GPIO_LED_SECURITY 17
#define WZRHPG300NH_GPIO_LED_ROUTER 18
#define WZRHPG300NH_GPIO_RTL8366_SDA 19
#define WZRHPG300NH_GPIO_RTL8366_SCK 20
#define WZRHPG300NH_GPIO_74HC153_S0 9
#define WZRHPG300NH_GPIO_74HC153_S1 11
#define WZRHPG300NH_GPIO_74HC153_1Y 12
#define WZRHPG300NH_GPIO_74HC153_2Y 14
#define WZRHPG300NH_GPIO_EXP_BASE 32
#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
#define WZRHPG300NH_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e60000,
}, {
.name = "user_property",
.offset = 0x1fc0000,
.size = 0x0020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x1fe0000,
.size = 0x0020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f60000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = {
.width = 2,
#ifdef CONFIG_MTD_PARTITIONS
.parts = wzrhpg300nh_flash_partitions,
.nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
#endif
};
#define WZRHPG300NH_FLASH_BASE 0x1e000000
#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
static struct resource wzrhpg300nh_flash_resources[] = {
[0] = {
.start = WZRHPG300NH_FLASH_BASE,
.end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device wzrhpg300nh_flash_device = {
.name = "ar91xx-flash",
.id = -1,
.resource = wzrhpg300nh_flash_resources,
.num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
.dev = {
.platform_data = &wzrhpg300nh_flash_data,
}
};
static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
{
.name = "wzr-hp-g300nh:orange:security",
.gpio = WZRHPG300NH_GPIO_LED_SECURITY,
.active_low = 1,
}, {
.name = "wzr-hp-g300nh:green:wireless",
.gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
.active_low = 1,
}, {
.name = "wzr-hp-g300nh:green:router",
.gpio = WZRHPG300NH_GPIO_LED_ROUTER,
.active_low = 1,
}, {
.name = "wzr-hp-g300nh:red:diag",
.gpio = WZRHPG300NH_GPIO_LED_DIAG,
.active_low = 1,
}, {
.name = "wzr-hp-g300nh:blue:usb",
.gpio = WZRHPG300NH_GPIO_LED_USB,
.active_low = 1,
}
};
static struct gpio_button wzrhpg300nh_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "aoss",
.type = EV_KEY,
.code = BTN_1,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_AOSS,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_USB,
.active_low = 1,
}, {
.desc = "qos_on",
.type = EV_KEY,
.code = BTN_3,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
.active_low = 0,
}, {
.desc = "qos_off",
.type = EV_KEY,
.code = BTN_4,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
.active_low = 0,
}, {
.desc = "router_on",
.type = EV_KEY,
.code = BTN_5,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
.active_low = 0,
}, {
.desc = "router_auto",
.type = EV_KEY,
.code = BTN_6,
.threshold = 3,
.gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
.active_low = 0,
}
};
static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
.gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
.gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
.gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
.gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
.gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
};
static struct platform_device wzrhpg300nh_74hc153_device = {
.name = NXP_74HC153_DRIVER_NAME,
.id = -1,
.dev = {
.platform_data = &wzrhpg300nh_74hc153_data,
}
};
static struct rtl8366_smi_platform_data wzrhpg300nh_rtl8366_smi_data = {
.gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
.gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
};
static struct platform_device wzrhpg300nh_rtl8366_smi_device = {
.name = "rtl8366-smi",
.id = -1,
.dev = {
.platform_data = &wzrhpg300nh_rtl8366_smi_data,
}
};
static void __init wzrhpg300nh_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(eeprom);
ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366_smi_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366_smi_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
ar913x_add_device_wmac(eeprom, NULL);
platform_device_register(&wzrhpg300nh_74hc153_device);
platform_device_register(&wzrhpg300nh_flash_device);
platform_device_register(&wzrhpg300nh_rtl8366_smi_device);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
wzrhpg300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WZRHPG300NH_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg300nh_gpio_buttons),
wzrhpg300nh_gpio_buttons);
}
MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
"Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);

View File

@ -51,6 +51,7 @@ enum ar71xx_mach_type {
AR71XX_MACH_WP543, /* Compex WP543 */
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
};
#endif /* _AR71XX_MACHTYPE_H */

View File

@ -0,0 +1,17 @@
#
# Copyright (C) 2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/WZRHPG300NH
NAME:=Buffalo WZR-HP-G300NH
PACKAGES:=kmod-ath9k hostapd-mini kmod-usb-core kmod-usb-ohci kmod-usb2
endef
define Profile/WZRHPG300NH/Description
Package set optimized for the Buffalo WZR-HP-G300NH
endef
$(eval $(call Profile,WZRHPG300NH))