[rdc] add better support for the RDC R8610 evaluation board: ide, rtc, super I/O

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15651 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/rdc/config-2.6.28

@@ -188,6 +188,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_CONCAT=y
 # CONFIG_MTD_NETSC520 is not set
+# CONFIG_MTD_R8610 is not set
 CONFIG_MTD_RDC3210=y
 CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
 CONFIG_MTD_RDC3210_BUSWIDTH=2

target/linux/rdc/config/profile-r8610

@@ -0,0 +1,6 @@
+CONFIG_MTD_R8610=y
+# CONFIG_MTD_RDC3210 is not set
+CONFIG_MTD_RDC3210_BUSWIDTH=2
+# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
+CONFIG_MTD_RDC3210_SIZE=0x400000
+# CONFIG_MTD_RDC3210_STATIC_MAP is not set

target/linux/rdc/files-2.6.28/drivers/mtd/maps/r8610.c

@@ -0,0 +1,97 @@
+/*
+ * Flash memory access on RDC R8610 Evaluation board
+ *
+ * (C) 2009, Florian Fainelli
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+static struct map_info r8610_map = {
+	.name		= "r8610",
+	.size		= CONFIG_MTD_RDC3210_SIZE,
+	.bankwidth	= CONFIG_MTD_RDC3210_BUSWIDTH,
+};
+
+static struct mtd_partition r8610_partitions[] = {
+        {
+                .name = "Kernel",
+                .size = 0x001f0000,
+                .offset = 0
+        },{
+                .name = "Config",
+                .size = 0x10000,
+		.offset = MTDPART_OFS_APPEND,
+        },{
+                .name = "Initrd",
+		.size = 0x1E0000, 
+		.offset = MTDPART_OFS_APPEND,
+        },{
+		.name = "Redboot",
+		.size = 0x20000,
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE
+	}
+};
+
+static struct mtd_info *mymtd;
+
+int __init r8610_mtd_init(void)
+{
+	struct mtd_partition *parts;
+	int nb_parts = 0;
+
+	/*
+	 * Static partition definition selection
+	 */
+	parts = r8610_partitions;
+	nb_parts = ARRAY_SIZE(r8610_partitions);
+
+	/*
+	 * Now let's probe for the actual flash.  Do it here since
+	 * specific machine settings might have been set above.
+	 */
+	r8610_map.phys = -r8610_map.size;
+	printk(KERN_NOTICE "r8610: flash device: %lx at %x\n", r8610_map.size, r8610_map.phys);
+
+	r8610_map.map_priv_1 = (unsigned long)(r8610_map.virt = ioremap_nocache(r8610_map.phys, r8610_map.size));
+	if (!r8610_map.map_priv_1) {
+                printk(KERN_ERR "Failed to ioremap\n");
+                return -EIO;
+	}
+
+	mymtd = do_map_probe("cfi_probe", &r8610_map);
+	if (!mymtd) {
+		iounmap(r8610_map.virt);
+		return -ENXIO;
+	}
+	mymtd->owner = THIS_MODULE;
+
+	add_mtd_partitions(mymtd, parts, nb_parts);
+
+	return 0;
+}
+
+static void __exit r8610_mtd_cleanup(void)
+{
+	if (mymtd) {
+		del_mtd_partitions(mymtd);
+		map_destroy(mymtd);
+		iounmap(r8610_map.virt);
+	}
+}
+
+module_init(r8610_mtd_init);
+module_exit(r8610_mtd_cleanup);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC R8610 MTD driver");
+MODULE_LICENSE("GPL");

target/linux/rdc/patches-2.6.28/008-r8610_flash_map.patch

@@ -0,0 +1,25 @@
+--- a/drivers/mtd/maps/Kconfig	2009-05-07 00:51:33.000000000 +0200
++++ b/drivers/mtd/maps/Kconfig	2009-05-07 01:08:25.000000000 +0200
+@@ -156,6 +156,12 @@
+ 	  Number of bytes addressed on the RDC-3210 flash device before
+ 	  addressing the same chip again
+ 
++config MTD_R8610
++	tristate "CFI flash device mapped on R8610"
++	depends on X86 && MTD_CFI && MTD_PARTITIONS
++	help
++	  Flash support for the RDC R8610 evaluation board.
++
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+--- a/drivers/mtd/maps/Makefile	2009-05-07 00:51:33.000000000 +0200
++++ b/drivers/mtd/maps/Makefile	2009-05-07 01:07:28.000000000 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+ obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
++obj-$(CONFIG_MTD_R8610)		+= r8610.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o

target/linux/rdc/profiles/R8610.mk

@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/r8610
+  NAME:=RDC R8160 Evaluation board
+  PACKAGES:=kmod-r6040 kmod-usb-core kmod-usb-ohci kmod-usb2 \
+	kmod-hwmon-core kmod-hwmon-w83627hf kmod-ide-core kmod-ide-it821x \
+	kmod-rtc-core kmod-rtc-m48t86 \
+	kmod-fs-ext2 kmod-fs-ext3
+endef
+$(eval $(call Profile,r8610))
+