qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 16:19:42 +02:00
Code
18,407 Commits 13 Branches 0 Tags 117 MiB
072a59cb9f
Commit Graph

6638 Commits

Author SHA1 Message Date
mb
072a59cb9f omap24xx: Update to 2.6.36-rc6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-30 09:50:04 +00:00
acoul
7ed7ed4ffa linux/ixp4xx: fix an embracing mistake on commit r23150 (thank you KanjiMonster) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-29 15:09:07 +00:00
acoul
762de7c3f1 linux/ixp4xx: sync 2.6.36 patches to 2.6.36-rc6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-29 13:50:16 +00:00
nbd
05c0f03a6c AP96: Fix LAN/WAN setup 
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-28 22:55:14 +00:00
lars
bdc88cc893 [kirkwood] Fix mv_cesa module dependencies and .ko file location 
Thanks KanjiMonster & Memphiz


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-28 16:32:08 +00:00
juhosg
9ddf78a6b3 ar71xx: build firmware image for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:54:04 +00:00
juhosg
3628a161a5 ar71xx: add support for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:59 +00:00
juhosg
83ad54b039 ar71xx: AR724[12] requires different USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:57 +00:00
juhosg
7576a0c62c ar71xx: build firmware image for the TL-WR841N v7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:54 +00:00
juhosg
c7f17e256a ar71xx: use the MDIO interface of the 2nd MAC on the ar7241 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:49 +00:00
juhosg
ae0b1149b9 ar71xx: move ath9k specific PCI fixup into a separate file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:46 +00:00
juhosg
d39b21c7f6 ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs 
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:43 +00:00
juhosg
1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:43:34 +00:00
juhosg
b2d27833af ramips: allow USB 
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:42:07 +00:00
juhosg
8c86c48cec generic: RTL8366S/RB: Fix autonegotiation for the WAN port. 
The RTL8366S/RB support connecting a second mac to it and using the 5th
port as an independent phy. Therefore we need to handle autonegotiation
changes for phy 4 like on a single phy device.

This fixes #7980, verified on a WNDR3700.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:42:05 +00:00
juhosg
fc494e5bb3 generic: add rtl8366rb switch port rate, port and qos enable/disable support 
Patch-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:41:54 +00:00
nbd
4fa1e52b3a Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 08:59:53 +00:00
mb
67ffd14387 omap24xx fb: Do not omit init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 22:03:18 +00:00
mb
c73bc2f9f6 omap24xx: Upgrade to linux-2.6.36-rc5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 12:53:23 +00:00
mb
20d3e9ea51 omap24xx: Export certain n8x0 GPIO switches as input device 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23120 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 12:50:53 +00:00
nbd
ebf957be00 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-20 22:14:07 +00:00
mb
659f656237 omap24xx cbus: fix ioctls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 18:14:17 +00:00
mb
0aeafa66af omap24xx: Add n8x0 specific GPIO switch code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 17:58:30 +00:00
mb
b1b3d54319 omap24xx: Add support for GPIO switches on the n810 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 17:31:00 +00:00
mb
61f8be3569 omap24xx: Update 2.6.36 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-15 19:15:52 +00:00
mb
52869e9343 omap24xx: Add 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-15 17:45:10 +00:00
juhosg
1c358226eb generic: add support for the EON EN25F32 flash chip 
* based on a patch by laigor <laigor@mail.ru> from #7882

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-14 12:03:01 +00:00
jow
2fdfa5601b [x86] add kvm_guest to subtarget list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23056 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 17:00:37 +00:00
florian
e2983886f3 [brcm63xx] remove wpa-supplicant and iw from the Tecom GW6x00 profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 08:30:35 +00:00
acoul
11a5ee608d linux/generic: update patches for 2.6.36-rc4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:24:53 +00:00
acoul
d681ce8a02 linux/generic: update mini_fo evict_inode migration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23046 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:22:39 +00:00
acoul
43c0355036 linux/generic: semi-revert squashfs 2.6.36 changes until lzma code gets ready for mainlin inclusion 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:21:38 +00:00
florian
98656aad20 [brcm63xx] default to using 2.6.35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23038 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:53 +00:00
florian
897a534e8b [brcm63xx] remove 2.6.33 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23037 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:47 +00:00
florian
a8120eb0bc [brcm63xx] change the Tecom GW6x00 profile to use wl instead of b43 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23036 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:41 +00:00
florian
9f1ce385e1 [brcm63xx] register udc and spi devices at the correct init level 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:35 +00:00
florian
70cdaf7073 [brcm63xx] refresh 2.6.35 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:29 +00:00
florian
057019f38a [kernel] refresh 2.6.35 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23033 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 21:23:15 +00:00
jow
53d26af5d0 [adm5120] override ARCH_PACKAGES 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23031 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 20:50:53 +00:00
jow
7d8546158e [malta] override ARCH_PACKAGES 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23030 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-12 20:50:38 +00:00
mb
53687e580b omap24xx: Add default network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-11 15:21:03 +00:00
mb
1d74d1ed46 omap24xx: Add pointercal file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-11 15:04:21 +00:00
mb
2617211ff3 Refresh patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-10 21:41:06 +00:00
mb
4aff85371c Allow receiving input events even if the X-server grabbed the device. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-10 21:40:12 +00:00
jow
4f5179175e [kirkwood] fix Dockstart default rdate interface in system config, reformat 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-07 21:26:12 +00:00
blogic
3b61310e43 [ifxmips] 
extracted firmware files were generated with an incorrect umask



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22957 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-06 16:34:45 +00:00
hcg
a38dbb92f5 [omap35xx] add package python-cjson to gumstix profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-06 13:56:43 +00:00
jow
84c3ecfb7f [x86] adjust image defaults for KVM 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-06 02:31:37 +00:00
jow
c9da55f807 [PATCH v5 3/4] x86: add kvm_guest subtarget 
Add a KVM guest subtarget to the x86 target. Since VirtIO is the
preferred I/O virtualization platform for kvm, this target expects it's
root device to be /dev/vda.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-05 23:18:51 +00:00
nbd
6f8d5efb9d ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-05 16:17:06 +00:00