qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 03:56:15 +02:00
Code
18,469 Commits 13 Branches 0 Tags 117 MiB
281ea71cac
Commit Graph

6950 Commits

Author SHA1 Message Date
kaloz
be413f5248 as we only support 2.6, remove the useless bool for it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23246 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 14:19:00 +00:00
kaloz
b280ad29c7 Toto, we don't support Linux 2.4 anymore.. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23245 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 14:15:46 +00:00
juhosg
808a6ab903 ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 14:10:34 +00:00
acoul
abcac74a19 linux/generic: update kernel patch refreshing. Include two missed patches. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23240 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 09:49:53 +00:00
acoul
8a1bafdbe1 linux/ixp4xx: revert accidentally leaked enabled kernel option (thank you kaloz) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23239 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 09:07:45 +00:00
acoul
b74489d910 linux/generic: refresh 2.6.36 kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 08:50:54 +00:00
lars
5581058bc0 [packages/kernel] Make mv_cesa crypto module available on Orion as well. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 21:33:07 +00:00
hauke
0848396060 kernel: fix some build warnings with kernel 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23226 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 20:43:07 +00:00
acoul
e4b2118622 linux/adm5120: add preliminary 2.6.36 kernel support (refresh patches) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23224 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 17:45:05 +00:00
acoul
1b10da25e2 yaffs2: add preliminary 2.6.36 kernel support (sync to yaffs2 git tree). This code needs further testing especially for backwards compatibility. It boots on rb532 with 
kernel options: CONFIG_DEVTMPFS & CONFIG_DEVTMPFS_MOUNT


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 16:55:06 +00:00
kaloz
7e99ea9fe6 [kernel]: upgrade kernel versions to the latest stable ones 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 10:40:41 +00:00
lars
b91f248247 [kirkwood] Iomega iConnect Wireless platform support 
This patch adds support for Iomega iConnect Wireless. Leds and wireless card
support are still missing.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 09:19:52 +00:00
lars
45cd926b58 [kirkwood] Remove hwmon and i2c support from being built-in 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23214 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 09:06:21 +00:00
lars
869647d532 [kernel] update 2.6.35.x to 2.6.35.7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23213 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-04 07:42:32 +00:00
mb
3e0c7f1e59 n810: Add fstab for maemo filesystems 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-03 12:16:56 +00:00
lars
d6d36454f1 [kirkwood] Add jffs2 feature flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23177 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-02 14:31:49 +00:00
juhosg
97627d06c5 ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-01 07:09:29 +00:00
mb
01ad8b8d4b omap24xx: Add maintainer information 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23160 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-30 10:50:51 +00:00
mb
072a59cb9f omap24xx: Update to 2.6.36-rc6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23157 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-30 09:50:04 +00:00
acoul
7ed7ed4ffa linux/ixp4xx: fix an embracing mistake on commit r23150 (thank you KanjiMonster) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-29 15:09:07 +00:00
acoul
762de7c3f1 linux/ixp4xx: sync 2.6.36 patches to 2.6.36-rc6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23150 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-29 13:50:16 +00:00
nbd
05c0f03a6c AP96: Fix LAN/WAN setup 
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-28 22:55:14 +00:00
lars
bdc88cc893 [kirkwood] Fix mv_cesa module dependencies and .ko file location 
Thanks KanjiMonster & Memphiz


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23145 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-28 16:32:08 +00:00
juhosg
9ddf78a6b3 ar71xx: build firmware image for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:54:04 +00:00
juhosg
3628a161a5 ar71xx: add support for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:59 +00:00
juhosg
83ad54b039 ar71xx: AR724[12] requires different USB setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:57 +00:00
juhosg
7576a0c62c ar71xx: build firmware image for the TL-WR841N v7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:54 +00:00
juhosg
c7f17e256a ar71xx: use the MDIO interface of the 2nd MAC on the ar7241 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:49 +00:00
juhosg
ae0b1149b9 ar71xx: move ath9k specific PCI fixup into a separate file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:46 +00:00
juhosg
d39b21c7f6 ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs 
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:43 +00:00
juhosg
1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:43:34 +00:00
juhosg
b2d27833af ramips: allow USB 
The current defaults for ramips rt305x does not allow the USB
subsystem to be selected/built.

This patch is just a small step in that direction.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:42:07 +00:00
juhosg
8c86c48cec generic: RTL8366S/RB: Fix autonegotiation for the WAN port. 
The RTL8366S/RB support connecting a second mac to it and using the 5th
port as an independent phy. Therefore we need to handle autonegotiation
changes for phy 4 like on a single phy device.

This fixes #7980, verified on a WNDR3700.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23127 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:42:05 +00:00
juhosg
fc494e5bb3 generic: add rtl8366rb switch port rate, port and qos enable/disable support 
Patch-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23126 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:41:54 +00:00
nbd
4fa1e52b3a Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 08:59:53 +00:00
mb
67ffd14387 omap24xx fb: Do not omit init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23123 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 22:03:18 +00:00
mb
c73bc2f9f6 omap24xx: Upgrade to linux-2.6.36-rc5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 12:53:23 +00:00
mb
20d3e9ea51 omap24xx: Export certain n8x0 GPIO switches as input device 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23120 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-26 12:50:53 +00:00
nbd
ebf957be00 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-20 22:14:07 +00:00
mb
659f656237 omap24xx cbus: fix ioctls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 18:14:17 +00:00
mb
0aeafa66af omap24xx: Add n8x0 specific GPIO switch code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 17:58:30 +00:00
mb
b1b3d54319 omap24xx: Add support for GPIO switches on the n810 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-18 17:31:00 +00:00
mb
61f8be3569 omap24xx: Update 2.6.36 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-15 19:15:52 +00:00
mb
52869e9343 omap24xx: Add 2.6.36 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-15 17:45:10 +00:00
juhosg
1c358226eb generic: add support for the EON EN25F32 flash chip 
* based on a patch by laigor <laigor@mail.ru> from #7882

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-14 12:03:01 +00:00
jow
2fdfa5601b [x86] add kvm_guest to subtarget list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23056 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 17:00:37 +00:00
florian
e2983886f3 [brcm63xx] remove wpa-supplicant and iw from the Tecom GW6x00 profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 08:30:35 +00:00
acoul
11a5ee608d linux/generic: update patches for 2.6.36-rc4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:24:53 +00:00
acoul
d681ce8a02 linux/generic: update mini_fo evict_inode migration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23046 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:22:39 +00:00
acoul
43c0355036 linux/generic: semi-revert squashfs 2.6.36 changes until lzma code gets ready for mainlin inclusion 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23045 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-13 07:21:38 +00:00