qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-29 05:32:28 +02:00
Code
16,943 Commits 13 Branches 0 Tags 117 MiB
3c6e0e0859
Commit Graph

70 Commits

Author SHA1 Message Date
juhosg
3c6e0e0859 Generic: Clean up output of AR8216 driver. 
This patch is rather a cosmetic patch. It fixes the following issues:

 * Demote the unknown device message to debug level to not spam
   the log.
 * Fix the version print of the unknown device message.
 * Output the 'attach' message only when attaching as switch driver,
   not when attaching as phy driver.
 * Correctly return NET_RX_DROP when dropping packets.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc: bacfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20773 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-10 11:34:11 +00:00
juhosg
9823d2fc7e generic: make chip detection more reliable in the AR8216 driver 
Fixes broken ethernet on the Planex MZK-W04NU/W300NH boards.

Cc: bacfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20753 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-09 08:40:12 +00:00
jow
58618dfb3d [PATCH 1/2] Add support for the ar8316 switch. 
This patch enhances the ar8216 driver with ar8316 support and fixes some minor
issues with the ar8216 driver itself. It should not break anything, but isn't
tested on ar8216 devices.

[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-05 23:03:16 +00:00
nbd
bc3d4f5dfd enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-28 18:57:42 +00:00
nbd
02c404ea21 ar8216: fix the mtu register definition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 21:43:16 +00:00
nbd
455e74f063 Several small fixes for ar8216 driver (patch by Jonas Gorski) 
* Create defines for some magic values/masks.

 * Change vlan_id to u16, to allow VIDs > 255.

 * Add a range check to set_pvid as it isn't a VID, but the index
   in the vlan table.

 * Set the max VID to 4094, since 4095 is a reserved value and
   should not be used.

 * In mangle_rx replace the provided VID with the VID of the table
   entry of the port, not the index of the table.

 * In hw_apply, remove a redundant emptyness check (was already
   checked several lines above).

 * In no vlan mode do not set the ingress mode to secure, as there
   are no vlan table entries, but to use the port's destination
   masks. Otherwise the switch won't forward anything.

 * In read_status tell that the phy is up (taken from the rtl8306
   driver).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 14:35:41 +00:00
juhosg
a5af4ae7d5 kernel: add driver for the RTL8366RB switch 
Thanks to Andrew Tarabaras.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-24 13:39:02 +00:00
juhosg
2c16cf4acb kernel: fix typos in the AR8216 header file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19834 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-24 13:38:48 +00:00
juhosg
48e652dc63 rtl8366_smi: sanitize gpio values to a 0/1 boolean 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:12 +00:00
juhosg
8a3eb00804 rtl8366s: reset the chip early, this allows ethernet to work as soon as possible 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-27 21:01:48 +00:00
juhosg
d7d76ebff9 rtl8366: make it available on all platforms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-25 15:13:38 +00:00
juhosg
1fc2b717c5 kernel: change debounce logic in the gpio-buttons driver 
* thanks to Nuno Gonçalves


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19115 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-13 10:18:24 +00:00
nbd
f2e8193802 deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/ 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-25 10:34:21 +00:00
nbd
00ebe9d87a rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-09 03:25:33 +00:00
nbd
1b18fb38dc ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 14:06:18 +00:00
nbd
b9c2e351d5 fix link status detection in various switch drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 14:06:09 +00:00
nbd
8bdac63e6f move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17594 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-09-16 12:24:46 +00:00
nbd
1881cb34ec add a driver for rtl8306 switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17248 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-08-14 00:52:17 +00:00
nbd
71f5d93ef9 ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-07-11 01:21:01 +00:00
nbd
109963bd6d ar8216: fix transmission of large frames by setting the switch mtu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-29 21:54:16 +00:00
nbd
66fc7bca04 ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-14 03:32:01 +00:00
nbd
887ce09dca fix a crash in ip175c attribute enumeration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-30 13:57:22 +00:00
nbd
681d7f126b Add a driver for Atheros AR8216 switches 
Thanks to Vertical Communications, Inc. for providing access to the documentation

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-29 13:02:41 +00:00
nbd
b645d7df22 swconfig: add a generic switch reset call 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-28 19:16:17 +00:00
nbd
dfce366310 clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 21:26:44 +00:00
nbd
52196955df swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 21:26:39 +00:00
nbd
fd1e16f560 add IC+ IP175C driver (based on Patrick Horn's driver, see #4050) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 18:57:55 +00:00
nbd
3a49788081 swconfig: treat struct switch_attr as constant 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 18:57:36 +00:00
nbd
18920f62de swconfig: remove old debugging stuff 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-20 18:57:30 +00:00
nbd
8e028d3df0 mvswitch: re-enable header mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-04-10 11:33:49 +00:00
nbd
6623e9fd70 atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-22 20:19:23 +00:00
nbd
a285220c58 mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-22 20:18:36 +00:00
juhosg
7f86296834 [kernel] generic-2.6: make MyLoader parser compatible with the old partition tables 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14155 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-01-23 11:54:44 +00:00
juhosg
28e6c72f66 [adm5120] move MyLoader partition parser into generic files, will be used on ar71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13256 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-17 10:14:58 +00:00
nbd
594d20c1a4 improve routing/nat performance for devices using the marvell 88e6060 switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-28 17:54:22 +00:00
nbd
79670e1e13 change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-18 21:43:30 +00:00
juhosg
3e7cd682f4 [kernel] make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12864 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-05 13:08:12 +00:00
juhosg
677508fba0 [kernel] modules/gpio_dev: move to drivers/char/ on older kernels as well, and create a package for it 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12133 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-08-05 09:52:23 +00:00
blogic
d29ad00711 makes ledtrignetdev work on .26 and fix whitespaces 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-08-04 14:05:04 +00:00
nbd
2b0ba098c0 add missing defines for mvswitch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-21 18:12:38 +00:00
nbd
1274eb90e0 some more mvswitch fixes: 
- initialize the vlan destination map properly
- workaround for moving node bug: clear the ATU database on every PHY poll


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-19 23:09:56 +00:00
nbd
15333144ce add extra safety for the packet mangling in the mvswitch driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-19 23:09:43 +00:00
nbd
523804cb7c set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-09 10:31:46 +00:00
noz
0b6dc7f4b8 Remove bogus zero-length ohci-ssb.c in generic-2.6/files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11190 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 20:55:06 +00:00
nbd
b84c7cd55b enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-29 12:55:44 +00:00
nbd
0f2df09b10 allow bigger packets in the marvell switch (does not fix the mtu problems yet) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-28 21:59:06 +00:00
nbd
7bd818a6e3 fix vlan mapping for cpu port on the marvell switch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-24 01:09:47 +00:00
nbd
f12451cca6 clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 16:28:05 +00:00
nbd
79f8984b04 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 08:29:01 +00:00
nbd
6598df69d1 Add stub driver for ADM6996F switches (configured through MII) 
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 02:53:04 +00:00