qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 07:55:21 +02:00
Code
23,788 Commits 13 Branches 0 Tags 117 MiB
4f860c88aa
Commit Graph

217 Commits

Author SHA1 Message Date
juhosg
db1a0d339e ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-07-03 15:24:01 +00:00
juhosg
5fa7ed291e ar71xx: create profile and build image for the TL-WDR4300 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 11:51:20 +00:00
nbd
669a7a0710 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-19 00:22:04 +00:00
nbd
c437387d32 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 19:37:49 +00:00
nbd
7ea20fba6a ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:01 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:21:47 +00:00
juhosg
e61440d8bd ar71xx: add support for TP-Link TL-MR3040 
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:24 +00:00
juhosg
0cff4f29f3 ar71xx: add profile and build image for the TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-05 17:02:41 +00:00
juhosg
8b09b5ce75 ar71xx: image: build initramfs images for the WHR boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31209 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-06 06:45:08 +00:00
juhosg
ad01160aa2 ar71xx: image: build initramfs images for more boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31116 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:13 +00:00
juhosg
bba495fb6f ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31115 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:11 +00:00
juhosg
3b5a6363a0 ar71xx: image: pass mtdlayout variables by value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:10 +00:00
juhosg
9f6d45184a ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:08 +00:00
juhosg
32fd04f49a ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:07 +00:00
juhosg
514a769538 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:05 +00:00
juhosg
5ca96e340c ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:04 +00:00
juhosg
5ba8709ee9 ar71xx: reclaim the 'user_property' partition on WHR-* boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31109 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:38:02 +00:00
juhosg
9db5393790 ar71xx: add profile and generate image for the JA76PF2 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30958 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-16 18:00:40 +00:00
juhosg
5539c13cff ar71xx: stop image building if a loader is missing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 14:03:28 +00:00
juhosg
ebeffb64e9 ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30712 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-24 20:41:38 +00:00
juhosg
8930617368 ar71xx: fix image signature for UBNT-XM boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-18 14:45:52 +00:00
cshore
5e4fce2233 [ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:38:33 +00:00
cshore
d24315ad26 [ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:29:26 +00:00
cshore
1a609bdce0 [ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:24:45 +00:00
juhosg
3c97dc485a ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 17:11:58 +00:00
juhosg
d87e44f83c ar71xx: add profile and build image for the TEW-673GRU board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30377 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-08 16:26:27 +00:00
juhosg
65ca4389f1 ar71xx: support for D-LINK DIR-615 rev. E4 
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29973 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:09 +00:00
juhosg
4bc970ba4f ar71xx: add support for TP-Link TL-MR11U 
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29972 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:37:01 +00:00
juhosg
796a085cac ar71xx: compress kernel binaries in Image/Prepare stage 
The lzma compressed kernel is used by one of the loaders.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-31 18:36:54 +00:00
florian
ebbec463c7 [ar71xx] add support for the Atheros AP113 reference board 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29935 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-28 13:19:49 +00:00
juhosg
8fcb797999 ar71xx: use 64k block size for WZR-HP-AG300H 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-27 10:42:41 +00:00
juhosg
406018ae4d ar71xx: fix sysupgrade image building of atheros boards after r29899 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-27 07:51:09 +00:00
juhosg
72a8cff4c1 ar71xx: create the temporary directory before building initramfs images 
Thanks to Florian for reporting.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29915 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-26 21:28:34 +00:00
juhosg
b8f0111122 ar71xx: create a profile and build images for Compex WPE72 
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29914 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-26 17:01:44 +00:00
juhosg
3f391b2e19 ar71xx: use the lzma loader on the Planex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 20:12:10 +00:00
juhosg
a805739180 ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 20:12:08 +00:00
juhosg
8b3aaef2dd ar71xx: pass mtdlayout to Planex boards via command line 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 18:40:33 +00:00
juhosg
3ea7ce5200 ar71xx: nuke fs_all variable in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:25 +00:00
juhosg
6c5c90403f ar71xx: create interim kernel files in a separate dir 
This reduces the size of the ImageBuilder tarball a lot.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:23 +00:00
juhosg
50e8ce781c ar71xx: prebuild all loaders in Image/Prepare stage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29878 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-24 09:47:22 +00:00
juhosg
b66dee35c3 ar71xx: build ALFA AP96 images with default profile as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29866 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 22:33:15 +00:00
juhosg
3746d2ed29 ar71xx: change board id of the UniFi board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-22 13:51:50 +00:00
juhosg
e1a6e8b311 ar71xx: add a profile and build images for the TL-WR2543N/ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29682 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-07 19:36:42 +00:00
juhosg
01c809eff1 ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-06 07:20:59 +00:00
juhosg
6c8dc3bd72 ar71xx: create profile and build image for the ALFA AP96 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29663 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 21:13:57 +00:00
juhosg
3d14a486be ar71xx: specify console kernel parameter for the Compex boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29660 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:59 +00:00
juhosg
bf238aa8e9 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:57 +00:00
juhosg
06483eda3d ar71xx: add profile and build image for the TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:54 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
ced006ab54 ar71xx: add profile and build factory image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:29 +00:00