* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27902 3c298f89-4303-0410-b956-a3cf2f4a3e73
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes#9689, #9405
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27896 3c298f89-4303-0410-b956-a3cf2f4a3e73
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27895 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is breaking some devices out there such as Winchiphead CH341 adapters (#9601)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27885 3c298f89-4303-0410-b956-a3cf2f4a3e73
UCLIBC_VERSION_* was only defined when toolchain options was enabled,
breaking packages depending on (not) having certain uClibc versions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27882 3c298f89-4303-0410-b956-a3cf2f4a3e73
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27880 3c298f89-4303-0410-b956-a3cf2f4a3e73
decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55%
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27878 3c298f89-4303-0410-b956-a3cf2f4a3e73
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27874 3c298f89-4303-0410-b956-a3cf2f4a3e73
Until we properly deal with the various versions of libelf we package,
mark perf as broken
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27867 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also prevent gdb from trying to link against the host's libexpat.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27859 3c298f89-4303-0410-b956-a3cf2f4a3e73
This change allows to apply OpenWrt, Buildroot and OE libtool fixes to packages which fail badly at autoreconf.
The fixup covers the common libtool versions 1.5, 2.2 and 2.4 and automatically determines the correct
version to use.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27855 3c298f89-4303-0410-b956-a3cf2f4a3e73
mbcache is only needed if xattr support is enabled, but this is only true
for ext4 on 2.6.37+, so just bundle it with ext4 when needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27849 3c298f89-4303-0410-b956-a3cf2f4a3e73
- split port argument at the rightmost colon, allows binding to specific IPv6 addresses
- don't use uci ipaddr var but resolve ifname and get addresses from it (#9853)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27843 3c298f89-4303-0410-b956-a3cf2f4a3e73
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27818 3c298f89-4303-0410-b956-a3cf2f4a3e73
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
