mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-03-14 08:49:12 +02:00
746c2a7d3c
swconfig fails to load uci configuration after the generic switch identifier changes. root@OpenWrt:/# uci show network | grep switch network.@switch[0]=switch network.@switch[0].name=eth0 network.@switch[0].reset=1 network.@switch[0].enable_vlan=1 network.@switch_vlan[0]=switch_vlan network.@switch_vlan[0].device=eth0 network.@switch_vlan[0].vlan=1 network.@switch_vlan[0].ports=0t 2 3 4 5 network.@switch_vlan[1]=switch_vlan network.@switch_vlan[1].device=eth0 network.@switch_vlan[1].vlan=2 network.@switch_vlan[1].ports=0t 1 root@OpenWrt:/# swconfig dev eth0 load /etc/config/network Failed to apply configuration for switch 'switch0' root@OpenWrt:/# swconfig dev switch0 load /etc/config/network Failed to apply configuration for switch 'switch0' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27820 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org