1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 01:43:09 +02:00
Commit Graph

212 Commits

Author SHA1 Message Date
nbd
96c14099ce ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:29 +00:00
nbd
9dfcd7e5e2 ar71xx: increase the delay after the ethernet MAC reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:25 +00:00
nbd
db4cd49d62 ar71xx: fix an unused variable warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 12:04:20 +00:00
nbd
ec8e57edd9 ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:30:13 +00:00
nbd
cc32100390 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-09 06:29:46 +00:00
nbd
480dfda6ec Revert "ar71xx: only enable the rx engine after the link is up..."
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-01 18:15:43 +00:00
juhosg
75e1476cce ar71xx: ag71xx: make ring sizes configurable via ethtool
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:10 +00:00
juhosg
a137dec884 ar71xx: ag71xx: prepare to make ring sizes configurable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:09 +00:00
juhosg
940317dc35 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31 22:53:07 +00:00
nbd
debcf79f90 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:08:01 +00:00
nbd
20aef6d6fc ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-30 23:07:57 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17 11:12:56 +00:00
matteo
51053e7640 use correct macros and frame size in ag71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-14 23:10:06 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 13:30:26 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-07 12:40:25 +00:00
nbd
7569a2e88f ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-02 00:47:29 +00:00
nbd
fd5cb87889 ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-02 00:47:25 +00:00
juhosg
cc04995115 ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:52:28 +00:00
juhosg
cbd9e227db ar71xx: use pr_* functions in drivers
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:52:12 +00:00
juhosg
c0734b8ffe ar71xx: return statements does not need parenthesis
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:51:38 +00:00
juhosg
74ed307c1e ar71xx: fix inline attribute location
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:51:21 +00:00
juhosg
2adda3cec6 ar71xx: wrap long lines
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:51:04 +00:00
juhosg
b6dbd83901 ar71xx: fix whitespaces nits
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-12 18:50:29 +00:00
nbd
8c032f3c80 ar71xx: fix more section mismatches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21 18:42:16 +00:00
nbd
0a95e857aa ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21 18:42:11 +00:00
nbd
5cc1f4bcf3 ar71xx: add a new driver for the ar7240 switch using swconfig.
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16 19:21:57 +00:00
nbd
f3814337f1 ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-06 12:40:07 +00:00
nbd
d856215f02 ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-04 02:15:08 +00:00
nbd
950d12ef69 ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down
fixes boot time crashes under load reported by matteo

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-04 01:31:33 +00:00
nbd
2a9dd36f43 ag71xx: remove rx alignment code for small packets, it seems to break ipv6 for some reason (fixes #7236)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 16:39:13 +00:00
nbd
ea9bbe955d ar71xx: fix up alignment handling
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary

tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15 23:31:17 +00:00
juhosg
da7aaa905b ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions
Cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 08:40:06 +00:00
juhosg
c74f817d15 ar71xx: ag71xx: call the phy driver's netif_receive_skb()
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.

This fixes the header mangling of the AR8216 driver.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 08:38:46 +00:00
juhosg
040ee7aa28 ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024)
* cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 13:59:08 +00:00
juhosg
90c499bfa0 ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stack
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 13:05:27 +00:00
juhosg
1a729d6932 ar71xx: ag71xx: introduce ag71xx_has_ar8216() helper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 13:05:24 +00:00
juhosg
51763ff18e ar71xx: ag71xx: reorganize ag71xx_rx_packet function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 13:05:20 +00:00
juhosg
afa983c991 ar71xx: ag71xx: Add netpoll support
This patch adds support for polling interrupts, used by
netconsole and the likes.

Tested on d-link dir-615 C1 using netconsole.

Signed-off-by: Pat Erley <pat-lkml@erley.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27 13:05:17 +00:00
agb
651c537f30 [ar71xx] wrt400n: lan ports don't need the ar8216 workaround
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 19:09:11 +00:00
juhosg
e6e9309426 ar71xx: change PHY select logic, and update phy_masks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-21 18:16:07 +00:00
juhosg
2feb525193 ar71xx: ag71xx: fix MAC address setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:36 +00:00
juhosg
0955ccfcf3 ar71xx: ag71xx: move calling ag71xx_phy_stop out from spinlock
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:22 +00:00
juhosg
5b74d557fa ar71xx: ag71xx: move link update function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:18 +00:00
juhosg
99dab77b59 ar71xx: ag71xx: don't use dev->trans_start
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:14 +00:00
juhosg
54b41868d6 ar71xx: ag71xx: use dma_unmap_single to unmap frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:10 +00:00
juhosg
ee12427e21 ar71xx: ag71xx: use correct device pointer for dma_map_single
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:18 +00:00
juhosg
a1c949e3fc ar71xx: ag71xx: don't use virt_to_phys
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:15 +00:00
juhosg
9cef2f85c2 ar71xx: ag71xx: simplify register access functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:12 +00:00
juhosg
75c4494280 ar71xx: ag71xx: use NETDEV_TX_OK
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:09 +00:00
juhosg
7bdbc197cd ar71xx: enable TX/RX flow control on the AR7240
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:38:41 +00:00
juhosg
d7d76ebff9 rtl8366: make it available on all platforms
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 15:13:38 +00:00
juhosg
57a1f64fd7 rtl8366s: simplify mib counters handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 14:24:53 +00:00
juhosg
e47c4f9d9e rtl8366_smi: move RTL8366S driver into a separate file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:38:07 +00:00
juhosg
62717a96cd rtl8366_smi: rename rtl8366s specific functions and definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:37:58 +00:00
juhosg
1d1fe9d55e rtl8366_smi: move chip specific stuff into its own struct
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:37:53 +00:00
juhosg
878e6fafb0 rtl8366_smi: separate gpio initialization
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:37:50 +00:00
juhosg
d4dafe5ce3 rtl8366_smi: store GPIO numbers directly in the rtl8366_smi struct
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:37:47 +00:00
juhosg
0a71019902 rtl8366_smi: store device pointer instead of plaform_device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-22 17:37:41 +00:00
juhosg
3e3062918b rtl8366_smi: rename switch attribute handlers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-21 12:13:43 +00:00
juhosg
4162526b1d rtl8366_smi: simplify rtl8366_attr_get_port_link function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 20:36:30 +00:00
juhosg
4cff025384 rtl8366_smi: make rtl8366_phy_config_{aneg,init} static
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 20:36:27 +00:00
juhosg
a51fdf9d02 rtl8366_smi: simplify rtl8366_{get,set}_port_vlan_index functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 20:36:24 +00:00
juhosg
64f1c1d827 rtl8366_smi: minor code optimalizations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19247 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 20:36:21 +00:00
juhosg
aac113a5bf rtl8366_smi: coding style cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 17:40:39 +00:00
juhosg
75c9ca9730 rtl8366_smi: add Kconfig option for the debugfs stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 09:30:36 +00:00
juhosg
01b8553904 rtl8366_smi: fix error checking in rtl8366s_set_vlan_4k_entry
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 09:30:32 +00:00
juhosg
f3d96d2a1e rtl8366_smi: fix parameter checking in rtl8366_attr_get_vlan_info
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19241 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 09:30:25 +00:00
juhosg
72607e76c7 rtl8366_smi: fix return codes in rtl8366s_reset_vlan
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19240 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 07:06:18 +00:00
juhosg
e191d5d165 rtl8366_smi: move variable initialization out from the loop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19239 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 07:06:15 +00:00
juhosg
77450dabca rtl8366_smi: fix port->flags calculation in rtl8366_get_ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-20 07:06:10 +00:00
juhosg
a3545860d0 rtl8366_smi: use inline function instead of a macro on top of container_of
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 09:01:40 +00:00
nbd
a289808594 rtl8366_smi: reset the vlan table when resetting the switch and use vlan get/set ports for vlan member lists
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 00:12:12 +00:00
nbd
efa2a6f909 rtl8366_smi: fix excessive stack usage and buffer handling bugs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-18 00:12:07 +00:00
nbd
f79dd5c840 ar71xx: fix return statement in the rtl8366 driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 22:57:08 +00:00
juhosg
ad726f6e1c rtl8366_smi: register the switch directly from the probe routine
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19202 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:37:09 +00:00
juhosg
221c0d2b2d rtl8366_smi: use vlanmc name for all vlanconfig variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:59 +00:00
juhosg
c0e88a59a8 rtl8366_smi: use vlan4k name for all vlan4kentry variables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:57 +00:00
juhosg
ced9e0d6c7 rtl8366_smi: move memset into the rtl8366s_get_member_config function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19199 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:53 +00:00
juhosg
f0d1ad31ba rtl8366_smi: move memset into the rtl8366s_get_vlan_4k_entry function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19198 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:49 +00:00
juhosg
ef0ac006ff rtl8366_smi: add vid parameter to the rtl8366s_get_vlan_4k_entry function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19197 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:46 +00:00
juhosg
3d89991158 ar71xx: upgrade rtl8366_smi driver
Thanks to Antti Seppälä.
Patch from https://forum.openwrt.org/viewtopic.php?pid=100150#p100150


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-17 21:17:42 +00:00
juhosg
c64ff4c0d6 ar71xx: add NAPI statistics to the ag71xx driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-08 20:22:55 +00:00
jow
9a41a375f8 [ar71xx] fix typo after r19054
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-06 20:16:07 +00:00
juhosg
0c1d7bcfa5 ar71xx: add detailed interrupt statistics for the ag71xx driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-06 15:24:01 +00:00
juhosg
efbbcd998e ar71xx: update Kconfig of the ag71xx driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19032 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-04 14:28:28 +00:00
juhosg
bdcb066fc4 ar71xx: add dummy debugfs support for the ag71xx driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-04 14:28:25 +00:00
nbd
483781cdb7 Revert "ar71xx: move phy_connect call to ag71xx_open" (r18691)
It's causing issues with switch drivers that register with swconfig and
makes fixing those unnecessarily complicated.
Fixes rtl8306 switch support on the WRT160NL.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-15 22:37:54 +00:00
juhosg
1e52fbecdb ar71xx: fix NULL pointer dereference in the ethernet driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18755 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-11 19:32:58 +00:00
juhosg
07282cf223 ar71xx: merge ag71xx specific patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-11 16:41:40 +00:00
juhosg
c9789da4c5 ar71xx: move mdio_bus reset code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-11 12:21:15 +00:00
juhosg
bfa2f874b9 ar71xx: add mdio bus driver for the rtl8366 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 10:29:35 +00:00
juhosg
5608c597c3 ar71xx: add support for external mii_bus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 10:29:27 +00:00
juhosg
1fec1f6c54 ar71xx: move phy_connect call to ag71xx_open
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 10:29:19 +00:00
juhosg
9152c5c793 ar71xx: change mii_bus name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-03 14:17:12 +00:00
juhosg
98a4123863 ar71xx: override fifo_cfg[123] values on AR7240
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-30 13:53:39 +00:00