1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 22:53:09 +02:00
Commit Graph

6004 Commits

Author SHA1 Message Date
juhosg
c9e0797935 ar71xx: add missing protocol definitions to default network configurations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 18:05:31 +00:00
florian
4f928f9353 [ar7] switch to 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 16:59:14 +00:00
florian
ab0261c7af [ar7] fix missing bits in ar7.h after r20037
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 16:59:08 +00:00
jow
3439dece43 [imagebuilder] remove dependency on CONFIG_ALL
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 14:49:53 +00:00
nbd
455e74f063 Several small fixes for ar8216 driver (patch by Jonas Gorski)
* Create defines for some magic values/masks.

 * Change vlan_id to u16, to allow VIDs > 255.

 * Add a range check to set_pvid as it isn't a VID, but the index
   in the vlan table.

 * Set the max VID to 4094, since 4095 is a reserved value and
   should not be used.

 * In mangle_rx replace the provided VID with the VID of the table
   entry of the port, not the index of the table.

 * In hw_apply, remove a redundant emptyness check (was already
   checked several lines above).

 * In no vlan mode do not set the ingress mode to secure, as there
   are no vlan table entries, but to use the port's destination
   masks. Otherwise the switch won't forward anything.

 * In read_status tell that the phy is up (taken from the rtl8306
   driver).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 14:35:41 +00:00
lars
95a4336b23 [xburst] jz4740: Properly setup intc irq handler.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 12:03:48 +00:00
lars
3a2459c94c [xburst] n516-lpc: Ack wakeup events and some minor cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-09 00:03:40 +00:00
hauke
2c2e1ade7c brcm47xx: fix commit r18413 "128MB ram problem"
The patch commited in r18413 was wrong.
This patch prevents prom_init_mem from scanning over 128MB ram.
This is from #6765 and #3177

Refresh all patches


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 22:03:00 +00:00
lars
c60251a7a0 [xburst] jz4740-gpio: Fix potential race condition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 20:34:40 +00:00
lars
114dc323ef [xbrust] Fix gpio and irq wakeup irq handling.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 20:34:01 +00:00
lars
66703ccb32 [xburst] Export gpio and irq registers through debugfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 20:32:08 +00:00
juhosg
770be264bf imagebuilder: add REVISION variable (closes #6795)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 17:00:46 +00:00
juhosg
d6a5fc493b ar71xx: simplify WP543 image generation, and fix rootfs offset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 15:32:48 +00:00
juhosg
affcf3e8d8 ar71xx: sync .33 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 14:38:46 +00:00
juhosg
04ebf72ec7 ar71xx: enable AR7240 DSA driver on 2.6.33 as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 14:38:43 +00:00
juhosg
c61ed8d072 ar71xx: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 13:00:23 +00:00
juhosg
e9152bd9e4 ar71xx: add NAND driver for the RB750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:10:23 +00:00
juhosg
fae32e3e86 ar71xx: add ar71xx_gpio_function_setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:10:14 +00:00
juhosg
7ee68b0bf3 ar71xx: add LED driver for the RB750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:10:01 +00:00
juhosg
bdf568ed13 ar71xx: add latch handling code for the RB750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:09:49 +00:00
juhosg
2b3fad7526 ar71xx: increase kernel partition size for the WP543 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08 12:09:38 +00:00
lars
38f5248e7c [xburst] Add sound support for the n516.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 23:45:45 +00:00
lars
06c8bec13f [xburst] Add support for enabling/disabling the aic controllers clock.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 23:44:58 +00:00
florian
d19c65588b [ar7] correct the MDIO base address and reset sequence for Titan (#6573)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 16:37:01 +00:00
juhosg
8221ebb020 ar71xx: add preliminary support for the RouterBOARD 750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 05:41:01 +00:00
juhosg
8d39aaa9fd ar71xx: make the rb4xx nand driver depends on AR71XX_MACH_RB4XX
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 05:40:58 +00:00
juhosg
1ce5f3c0cf ar71xx: rename mach-rb-4xx.c to mach-rb4xx.c, and change Kconfig symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-07 05:40:56 +00:00
florian
2d17b93d56 [ar7] let 802.1q tagged frames go in and out from cpmac (#6730)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-06 22:33:30 +00:00
florian
d66d9ebb2e [ar7] fallback to "dumb switch" mode if no PHY was detected
This will enable the second Ethernet MAC in most cases, but will allow
previously non working devices to work.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-06 22:33:25 +00:00
florian
b2a574ea27 [ar7] fix cpmac panics with 2.6.32 (#6764)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-06 22:33:19 +00:00
thepeople
960b5ab667 fix missing symbols for kernel 2.6.33, closes #6803 thanks Maddes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 23:10:54 +00:00
thepeople
0a6ed453c3 fix missing symbols for kernel 2.6.32, closes #6802 thanks Maddes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 22:35:24 +00:00
thepeople
8c78d96c44 add missing symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 21:58:49 +00:00
juhosg
da900edca4 ar71xx: don't init PCI irqs on the AR7240 if the PCIe subsystem are in reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:29 +00:00
juhosg
903cab07f2 ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
* closes #6782


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:27 +00:00
juhosg
3481530afd ar71xx: fix status led detection on the RB4xx boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20005 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:24 +00:00
juhosg
0955ccfcf3 ar71xx: ag71xx: move calling ag71xx_phy_stop out from spinlock
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:22 +00:00
juhosg
5b74d557fa ar71xx: ag71xx: move link update function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:18 +00:00
juhosg
99dab77b59 ar71xx: ag71xx: don't use dev->trans_start
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:14 +00:00
juhosg
54b41868d6 ar71xx: ag71xx: use dma_unmap_single to unmap frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 20:29:10 +00:00
lars
cde7986406 [xburst] Add support for the n516
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 04:21:41 +00:00
lars
de2c2b0b71 [xburst] Add subtarget for each device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 04:15:51 +00:00
lars
474eca73a8 [xburst] jz4740 pm: Fix gpio suspend/resume. Turn pll off while in suspend and gate
clocks off which arn't handeld by their subsystems yet.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 02:56:25 +00:00
lars
03d2078bc2 [xburst] gpio.h: Add proper parenthesis to JZ_GPIO_PORTX macros
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 02:53:23 +00:00
lars
38b776b710 [xburst] jz4740_fb: Add support for parallel displays, improve power consumption
and some minor bugfixes


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-05 02:48:55 +00:00
florian
51b563fb2a [rdc] fix watchdog driver unregistering, patch by Bernhard Loos
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 20:48:43 +00:00
lars
37f69cee3c [xburst] jz4740_udc: Implement suspend/resume
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 20:20:54 +00:00
florian
d34517dacf [rdc] rework reboot mechanism with the new watchdog fixes
The fixing of the watchdog driver makes it generate a NMI so the reboot_fixup
can no longer be called from NMI context, instead, override the machine_retart
callback with our southrbridge reboot mechanism. Patch by Bernhard Loos.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 08:28:20 +00:00
florian
e1e080bae6 [rdc] enable the required packages to use a gpio-based reset button
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 08:28:10 +00:00
florian
baa06e35a6 [rdc] remove now unused rdc321x_gpio.h file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 08:28:05 +00:00
florian
23e003c5bf [rdc] improve sitecom device support
Add support for the 3 GPIO LEDs, reset button and switch to the gpio-buttons
driver. Patch by Bernhard Loos.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 08:27:59 +00:00
florian
5571a3d454 [rdc] select ARCH_REQUIRE_GPIOLIB which is required for our gpiolib driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 08:27:51 +00:00
florian
a0438292e5 [rdc] add a new southbridge driver which registers the gpio and watchdog platform devices
This also fixes the watchdog logic and abstracts the access to the RDC321x
southbridge PCI configuration register space. Based on a patch by Bernhard Loos.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 07:54:25 +00:00
florian
0ecd32cf42 [au1000] merge the two patches applying to the same file in a single patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-04 07:54:20 +00:00
hauke
a7b6796e7d brcm47xx: add CONFIG_CMDLINE again
Fix for r19955
this patch was suggested by tripolar


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 20:32:41 +00:00
juhosg
8e4391e887 ar71xx: restore command line on 2.6.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 20:04:12 +00:00
juhosg
799d1e823e ar71xx: sync 2.6.33 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 20:04:08 +00:00
matteo
d86402b68f 2.6.33 fixes for atheros and madwifi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 13:52:28 +00:00
juhosg
6b1dd0b890 kernel: fix m25p80 patches for 2.6.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 09:40:20 +00:00
juhosg
91ddf2fe5b ar71xx: refresh 2.6.33 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 09:40:17 +00:00
juhosg
c5df2d1d0e kernel: refresh 2.6.33 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-03 09:40:12 +00:00
florian
fb4e18d48b [brcm63xx] do not register devices in device_initcall level, this breaks the SSB SPROM registration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 21:49:37 +00:00
hauke
3b914222bd kernel: add some missing config files and make compat-wireless build with kernel 2.6.33
Thanks tripolar for the missing config symbols


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 21:26:36 +00:00
hauke
e8e50f9ded brcm47xx: add support for kernel 2.6.33
Thanks to acoul and tripolar


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 21:16:18 +00:00
juhosg
ee12427e21 ar71xx: ag71xx: use correct device pointer for dma_map_single
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:18 +00:00
juhosg
a1c949e3fc ar71xx: ag71xx: don't use virt_to_phys
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:15 +00:00
juhosg
9cef2f85c2 ar71xx: ag71xx: simplify register access functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:12 +00:00
juhosg
75c4494280 ar71xx: ag71xx: use NETDEV_TX_OK
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:09 +00:00
juhosg
4001872b63 ar71xx: use COMMAND_LINE_SIZE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19947 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-02 13:36:04 +00:00
florian
e89e75277c [brcm63xx] remove mail headers from patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 14:55:34 +00:00
florian
882079c313 [kernel] prevent UML build failure against decompress_lzo.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 14:55:15 +00:00
kaloz
9924a3340e [kernel]: drop support for the old style magicbox-cf driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 08:04:14 +00:00
juhosg
a19833b9c2 ar71xx: add default network configuration file for the TL-WR741ND board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:48 +00:00
juhosg
f12c18b33b ar71xx: add default network configuration file for the DIR-600 rev. A1 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:46 +00:00
juhosg
ea92a8bef8 ar71xx: register DSA switch for the AP91 based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:43 +00:00
juhosg
e7f38ddc4f ar71xx: add DSA driver for the AR7240 built-in ethernet switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:41 +00:00
juhosg
6eb16ce40c ar71xx: add QinQ tagging format for the DSA driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 07:34:37 +00:00
nico
22fd69178a kernel: add 2 config symbols preventing ppc40x & ppc44X from being configured with all modules enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-01 06:22:42 +00:00
florian
4d9258acb3 [brcm63xx] add support for 2.6.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 21:24:34 +00:00
florian
554266a19e [kernel] misc 2.6.33 compilation and config symbols fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 20:50:57 +00:00
florian
a1bd9bdd42 [brcm63xx] add support for 2.6.32, dropped the SPI patch for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 20:50:51 +00:00
jow
70c479891f [brcm-2.4] remove asterisk from default vlan ports in netconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 16:44:40 +00:00
jow
b48013b35b [package] switch:
eliminate the asterisk from the switch port configuration and set it
	automatically on the first vlan, this aligns the broadcom vlan config
	with the swconfig format


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 16:40:06 +00:00
matteo
518b748f5f ar71xx: 2.6.33 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 16:33:15 +00:00
matteo
a569d19be4 atheros: 2.6.33 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 15:30:07 +00:00
matteo
277b4f4f30 kernel: add 2.6.33 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 15:20:00 +00:00
florian
c2af128ef5 [brcm47xx] explicitely enable shared interrupt 2 for any core that did not a dedicated IRQ
Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ
anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work.
Also remove a bogus comment.

Signed-off-by: Jochen Friedrich <jochen@scram.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:44 +00:00
florian
07f3454986 [brcm63xx] build images for RG100A (bcm6358-based boards) (#6755)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:39 +00:00
florian
f78ce78fde [malta] add a MIPS Malta target to be used with qemu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:34 +00:00
florian
01c806d406 [kernel] add missing libertas symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 11:09:28 +00:00
hauke
4a42736cb4 [brcm47xx] remove unneeded patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 10:21:04 +00:00
hauke
4d8bddbd83 kernel: update to kernel 2.6.32.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 10:16:47 +00:00
juhosg
1954de5e1c adm5120: remove 2.6.31 related stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 09:41:02 +00:00
juhosg
5d6a71a977 adm5120: switch to 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 09:41:00 +00:00
juhosg
7accb609b3 kernel: yet another missing symbol for 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-27 16:27:04 +00:00
juhosg
73ab85ba3a adm5120: fix build error in the USB driver on 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-27 16:26:49 +00:00
lars
a35f8c9470 [xburst] jz4740_nand:
* Use NAND_ECC_HW_OOB_FIRST mode instead of a patched NAND_ECC_HW
* Fix subpage writing
* speed up reading


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26 18:09:12 +00:00
thepeople
117f7dfd60 add missing symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26 16:38:48 +00:00
thepeople
d60b20b806 add support for the MN-700 platform, closes #2575
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26 01:34:39 +00:00
juhosg
4bb6d1d93a ar71xx: select vsc73x5 microcode in the AP83/PB44 profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-24 13:49:02 +00:00