qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-12 14:37:07 +03:00
Code
10,498 Commits 13 Branches 0 Tags 117 MiB
67ea4e32af
Commit Graph

3830 Commits

Author SHA1 Message Date
nbd
67ea4e32af use the right hotplug2 invocation for initramfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10928 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 14:28:13 +00:00
juhosg
54af0ced73 [package] base-files: fix a typo 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10927 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 14:19:35 +00:00
nbd
68e839a7db leave ack/cts setting alone by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10926 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 04:58:34 +00:00
nbd
9110e38c85 move timeout trigger for protection mode to node timeout trigger 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 03:50:01 +00:00
nbd
1b7aee1d72 clean up cwmin/cwmax defines and remove some wrong values which made minstrel a bit inaccurate 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-23 03:49:42 +00:00
nbd
82bf60b712 madwifi: put an upper limit on the amount of sampling that minstrel should do when 
the link changes its status from very good to slightly bad. the previous version
of the patch could have resulted in erratic rate control behavior when there
was a lot of sampling backlog.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-22 23:35:27 +00:00
nbd
263af2cd58 This patch re-adds the udev and hotplug2 initialization fixes originally 
present in /init but was removed when some code was moved from /init to
/etc/preinit in rev 10870. This adds udev initialization and only handles
hotplug2 initialization when hotplug2 is present.

Signed-off-by: Yuji Mano <yuji.mano@am.sony.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10912 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-22 19:22:05 +00:00
nico
f7af5c7e5a move hotplug2 & udevtrigger to base section 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10910 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 22:31:07 +00:00
matteo
a57da010e1 assign names to filesystems when mounting virtual ones (closes #3340) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10903 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 18:08:05 +00:00
nbd
0f96ffc8be add some more fine tuning for madwifi 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 03:45:52 +00:00
nbd
922c0b910d madwifi: add configurable rssi threshold and timeout values for protection mode 
the 11b protection mode can harm throughput a lot, so let's make sure that it is
only active as long as it needs to be.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 03:45:39 +00:00
nbd
7f2bf65a36 reorder patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10898 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 03:45:22 +00:00
nbd
1f202039db madwifi: remove the minstrel_mrr hack and add two patches that massively improve minstrel's performance and response time 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10897 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-21 02:39:40 +00:00
nbd
29e18fb10f fix a some txq races (merge from madwifi-trunk) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 22:01:27 +00:00
nbd
deb3135ef2 add missing kmod-hid module (thx, fish) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10894 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 21:01:03 +00:00
nico
b9c0ebdb06 build the kmod-video-quickcam module only if it was selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 09:49:13 +00:00
nico
2961761854 don't build acx* kernel modules on UML 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 09:48:04 +00:00
nbd
16ddb9350a remove some redundant code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10870 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-20 03:24:43 +00:00
matteo
0938cd3031 fix swap{on,off} path 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-19 14:36:01 +00:00
florian
3110d42c42 Adm5120 also supports generic GPIO, allow gpioctl to be built (#3132) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10857 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 17:34:04 +00:00
florian
9aae40010d Mark rt61 as 2.6.23 only (#3337) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 17:11:34 +00:00
nbd
936e7cca34 more performance for madwifi :) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 16:37:36 +00:00
juhosg
f5d80d8d34 [package] use the spi-ks8995 driver on the WRT55AG v2 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 13:12:57 +00:00
juhosg
b9b75c56b8 [package] spi-ks8995: fix a compiler warning, fix the copyright header 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 13:11:11 +00:00
juhosg
868a97c156 [package] add a driver for the KS8995 ethernet switch, will be usable to control the switch on some boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 09:59:09 +00:00
nbd
d3f4ff8b14 add performance improvement for madwifi on low-memory systems 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-17 02:40:55 +00:00
nbd
2480491ede remove udevextras dependency on udev (thx, fish) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 17:19:41 +00:00
thepeople
c435eff562 fix restart on platforms without a setup_switch() 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 16:29:49 +00:00
juhosg
3e6a0c14b4 [package] move spi_gpio driver into the kernel, clean-up SPI modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 07:33:43 +00:00
juhosg
a58eaf210a update iptables to 1.4.0 (2.6 kernels only), refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 06:11:23 +00:00
nico
73b35ed447 explicitely disable a bunch of package on ar7 until we properly detect pci & usb support at configure time 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10839 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 02:08:11 +00:00
nico
effa49178d mark b44 as broken, it doesn't build anymore due to SSB changes apparently (closes: #3333) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10838 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-15 01:56:41 +00:00
kaloz
41696be697 do target dependent optimizations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10834 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-14 13:24:30 +00:00
kaloz
3dbd53deca udevtrigger shouldn't depend on udev, we use it standalone for hotplug2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-14 13:20:04 +00:00
nico
58ca814b23 mark all openswan packages as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-14 12:31:27 +00:00
agb
4d64099c46 Mark broken packages as broken: 
- acx-mac80211
 - openswan
 - aodv-uu


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10831 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-14 11:18:29 +00:00
nico
ecfbe962cc package shared library as well (partially closes: #3030) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-14 02:06:35 +00:00
nbd
e74c1c3499 upgrade uci to 0.3.3, build lua plugin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 14:34:42 +00:00
nbd
124c9d9c48 remove lua's dependency on libreadline and libncurses 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 14:34:36 +00:00
nico
5c1eb4b4e9 fix udevextras build when no extras were actually selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10816 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 14:20:34 +00:00
nico
ea0badb270 mac80211 / compat-wireless fixes: 
* build in KERNEL_BUILD_DIR
 * only build kernel module if it's selected


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 13:35:02 +00:00
nico
2cd08ba990 update libnl to 1.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 13:22:15 +00:00
nbd
eeed6076b9 move lua from packages/ to trunk in anticipation of upcoming stuff ;) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-13 01:06:12 +00:00
jk
843ca24325 [package/udev] Replace udev-vol-id pacakge with configurable udevextras 
Instead of just having one vol_id package, create a 'udevextras' package
for all of the udev "EXTRAS" utilities. Selecting this package allows
each extra to be selected individually.

Also, installing udevextras adds a few udev rules for persistent device
naming.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10805 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 23:32:44 +00:00
jk
9d35bf3e30 [package/udev] Group input devices under /dev/input 
This change adds a udev rules file to group input devices (via symlinks)
under their usual expected location of /dev/input.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 23:24:22 +00:00
jk
aff6fa1a1d [package/kexec] Use new kexec tools 
Horms' new kexec-tools repository has a number of updates and fixes for
kexec, and also supports the PS3.

This change updates the kexec repo, and adds a few build-system patches
to make it work with OpenWRT.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 23:20:31 +00:00
nico
f3ad2585b3 fix build on linux >= 2.6.23 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 22:04:09 +00:00
nico
dbca3552f6 package/ov51x-jpeg: 
* update to 1.5.7
 * add userland package
 * add fallback url
(closes: #3216)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 20:43:38 +00:00
nico
899c0c59f7 disable kmod-mmc-over-gpio on x86 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10799 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 20:28:54 +00:00
nico
f5df126e9e add missing MMC config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10798 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-12 20:27:48 +00:00