2d4b05f03e
Update bridge-utils to the last upstream version 1.5.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:09 +00:00
d4076adb6f
[OpenWrt-Devel] update e2fsprogs
...
Update e2fsprogs to the last upstream version 1.42.
blkid works fine without 100_add_missing_libpthread_for_blkid.patch.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:07 +00:00
f1215ac7aa
[lantiq] fix compile error in previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:05 +00:00
61b8a7cdc6
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:04 +00:00
cefea1a955
[pjsip] drop obselete Config.in file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:01 +00:00
d54a0c39e1
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:45 +00:00
073aa05f36
ramips: rt3883: enable PCI on the RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:44 +00:00
0dad89e259
ramips: rt3883: add PCI support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:42 +00:00
34acde8e5f
ramips: rt3883: sync 2.6.39 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:41 +00:00
5775cc2b9c
ramips: use SoC specific irq.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:40 +00:00
13595a7a28
[lantiq] fixes irq locking in ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:58 +00:00
d4d4e1aa21
[lantiq] fixes gpio_export patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:57 +00:00
059d9f49a5
[pjsip] bump to 1.12, merge improved lantiq aud_dev driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:55 +00:00
decfe8e3f5
[lantiq] add a simple sip client
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:52 +00:00
f8d8046b51
[ltq-dsl] add annex selection support to ltq_dsl package
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:49 +00:00
3c97dc485a
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:58 +00:00
a433c026e5
ar71xx: add model detection for TL-WR842N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:57 +00:00
c972a4ddbe
[package] hostapd: correctly pass 64 char hex PSK to wpa_supplicant
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:07:53 +00:00
8ac28fce23
[malta] update to 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:30 +00:00
3e65a7b3dd
[ar7] fix titan gpio register size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:27 +00:00
f86677c02e
block-mount: do not auto-mount anonymous mtdblock devices ( fixes #10960 , #10850 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:31:31 +00:00
ae888d8dfb
quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:31:28 +00:00
e95d1bebf7
ramips: rt3883: update package list in the default profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:05 +00:00
2223374185
ramips: add preliminary support for the Asus RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:04 +00:00
10a983eea1
ramips: raeth: enable MDIO code for RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:03 +00:00
f835afb5d9
package/modules: enable ECHI/OHCI for RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:01 +00:00
07c8d27309
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:17:59 +00:00
9aa91c2c63
[package] kexec-tools: update to 2.0.3 ( fixes #9846 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 12:36:36 +00:00
17d0a31e9d
[malta] add support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 12:36:34 +00:00
adf8b5a51f
brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:41:20 +00:00
e1a53dd6b0
brcm47xx: activate config bug to show warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:40:01 +00:00
9bc4638399
gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 20:25:47 +00:00
4cf5dc60f9
swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ ( fixes #9765 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 19:27:01 +00:00
444f3dd7f1
package/grub: fix stage2 link with recent binutils
...
We want the `_start's symbols to be at the very beginning of the `stage2'
binary's `.text' section. However, nothing enforces this requirement. With
recent binutils (ie. post 2.19.1), this results in a corrupt binary, as ld(1)
puts another symbol (eg. `journal_init') at the beginning of the section.
Fix this by providing a stripped down version of the default linker script
where we enforces the position of `_start' in the `.text' section.
Patch by Arnaud Lacombe (#10444 )
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:40:18 +00:00
71da0d9534
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:47 +00:00
85b1ee0e18
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:46 +00:00
1b56ff8998
brcm47xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:45:27 +00:00
6d7798dc01
brcm47xx: update usb driver for brcm47xx.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:38:10 +00:00
947736eb77
tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:12:08 +00:00
e59549b5a0
glibc: remove all previous (ancient) versions, add 2.14 (partially based on a patch and testing by WillieNL)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:12:01 +00:00
ae2cd78ff5
broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 15:43:14 +00:00
dd584f3173
ramips: add initial support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:14 +00:00
c9a5f3f810
ramips: include 'linux/module.h' in the ramips_spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:13 +00:00
4c24144f1f
ramips: rt288x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:12 +00:00
40c07f37d9
ramips: rt305x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:10 +00:00
9701922238
[cns3xxx]: enable another l2 cache errate on newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 11:22:08 +00:00
880df07125
[toolchain/binutils]: enable 2.22 for unsupported archs if BROKEN is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 09:56:47 +00:00
98ab10100c
[toolchain/gcc]: upgrade vanilla gcc to 4.6.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 09:48:39 +00:00
1f93aa565e
[toolchain/binutils]: use binutils 2.22 by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 09:17:54 +00:00
a7950ce0d8
[toolchain/uClibc]: use uClibc 0.9.33 by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 09:15:29 +00:00
blogic
juhosg
hcg
florian
nbd
hauke
kaloz