1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-12 02:09:42 +02:00
Commit Graph

344 Commits

Author SHA1 Message Date
claudio
b59add4dfd [ar71xx] Add support for Ubiquiti UniFi AP
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-06 21:08:48 +00:00
nbd
11c1641bac ar71xx: Set eth1 MAC address from EEPROM for WNDR3700
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:46:07 +00:00
nbd
6f13c00b0a ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-04 18:39:49 +00:00
nbd
4f69a1b329 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 14:55:53 +00:00
nbd
2ec79a75b2 ar71xx: use the new ar7240 switch driver for tl-wa901nd as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-21 18:42:22 +00:00
jow
f3367a8563 [ar71xx] remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14 23:08:10 +00:00
nbd
a63bf2580b ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14 13:41:42 +00:00
nbd
c952d82a6c ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-14 00:14:59 +00:00
juhosg
97627d06c5 ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-01 07:09:29 +00:00
nbd
05c0f03a6c AP96: Fix LAN/WAN setup
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-28 22:55:14 +00:00
juhosg
3628a161a5 ar71xx: add support for the TL-MR3420 v1 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:59 +00:00
juhosg
83ad54b039 ar71xx: AR724[12] requires different USB setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23135 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:57 +00:00
juhosg
c7f17e256a ar71xx: use the MDIO interface of the 2nd MAC on the ar7241
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:49 +00:00
juhosg
ae0b1149b9 ar71xx: move ath9k specific PCI fixup into a separate file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:46 +00:00
juhosg
d39b21c7f6 ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:53:43 +00:00
nbd
4fa1e52b3a Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 08:59:53 +00:00
nbd
6f8d5efb9d ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-05 16:17:06 +00:00
juhosg
006386c4b4 ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03 18:14:37 +00:00
juhosg
d1f333874d ar71xx: rewrite SPI drivers for the RB4xx boards
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-31 20:13:47 +00:00
juhosg
a393655eea ar71xx: change mac address initialization
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-18 16:00:28 +00:00
nbd
5cc1f4bcf3 ar71xx: add a new driver for the ar7240 switch using swconfig.
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-16 19:21:57 +00:00
nbd
a0d848ed9d ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-27 21:04:43 +00:00
nbd
858ebac7b8 ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-22 12:37:44 +00:00
nbd
e70bddd713 ar71xx: set default values for the fifo cfg registers on AR724x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-20 01:54:11 +00:00
juhosg
e14f929ec7 ar71xx: in-flash macs and eeprom for mach-eap7660d
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15 07:36:52 +00:00
juhosg
8119ffe60a ar71xx: add support for the Senao EAP7660D board
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-18 16:22:05 +00:00
juhosg
78fe3d5e8c ar71xx: avoid duplicated 'board' parameter in kernel command line
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14 20:02:44 +00:00
juhosg
d1b5649e76 ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12 13:20:39 +00:00
juhosg
2a528006a3 ar71xx: fix phy_mask for the RB450
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-09 19:48:35 +00:00
juhosg
9f9bd4b6ee ar71xx: fix phy_mask on the RB433 for the IP17xx driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-08 20:19:18 +00:00
juhosg
c2a2341e50 ar71xx: fix 2.6.34 build errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-07 09:18:13 +00:00
juhosg
0b2a2f1091 ar71xx: fix nbg460n mtd partitions
This fixes the NBG460N/550N/550NH mtd partitions.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14 08:37:58 +00:00
juhosg
d6bb729d0e ar71xx: remove config partition from the mtd map on the MZK-W300NH board
This space can be used to extend the rootfs_data partition.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:28:04 +00:00
juhosg
d0bcb711d4 ar71xx: fix firmware partition size on the MZK-W04NU board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26 18:28:01 +00:00
nbd
1cb9c65242 ar71xx: fix a wifi card stability issue
when we receive a pci/ahb interrupt, we need to flush pending data for dma
from the device, otherwise the tx path may get stuck if the completion flag
of the dma descriptor is not updated at the time the tx interrupt arrives.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 17:24:11 +00:00
juhosg
f74b974c32 ar71xx: reduce button threshold value on the NBG460 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21 19:07:23 +00:00
juhosg
e1b44378be ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21 19:07:19 +00:00
juhosg
17ce7e7cf9 ar71xx: adding support for zyxel nbg460n/550n/550nh boards
This patch adds support for the zyxel nbg460n/550n/550nh routers.
Currently this only works if a second stage bootloader is also flashed,
as the used switch needs extra initialization.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18 16:24:12 +00:00
juhosg
3d089c4fe3 ar71xx: update phy masks for the Planex boards
This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 08:40:14 +00:00
juhosg
d7e830a7a9 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
Cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-09 08:40:09 +00:00
nbd
e9d07710ee ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-06 00:12:50 +00:00
jow
58618dfb3d [PATCH 1/2] Add support for the ar8316 switch.
This patch enhances the ar8216 driver with ar8316 support and fixes some minor
issues with the ar8216 driver itself. It should not break anything, but isn't
tested on ar8216 devices.

[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-05 23:03:16 +00:00
nbd
57563ffd07 ar71xx: fix pci on ar7241/ar7242
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 00:36:37 +00:00
nbd
b491b147a1 ar71xx: fix the wan port on pb92
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 00:36:04 +00:00
nbd
a7ac823d06 ar71xx: reset the mdio bus on ar7241/ar7242
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28 00:35:44 +00:00
nbd
218734027d ar71xx: add basic kernel support for pb92
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 22:35:52 +00:00
nbd
fd3222baa4 ar71xx: add support for ar7241 and ar7242
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 22:35:41 +00:00
nbd
c363de958e ar71xx: fix pci link detection for ar724x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 22:35:27 +00:00
agb
651c537f30 [ar71xx] wrt400n: lan ports don't need the ar8216 workaround
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26 19:09:11 +00:00
juhosg
8b81ef5e98 ar71xx: use the RB411 setup for the RB411U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-21 18:16:24 +00:00