5650 Commits

Author	SHA1	Message	Date
Lars-Peter Clausen	1dd40a2e65	xburst: Enable suspend in config	2009-11-09 17:53:35 +01:00
Lars-Peter Clausen	27ca1adf36	jz4740: Cleanup powermanagemnt code. Add inital suspend support.	2009-11-09 17:47:28 +01:00
kaloz	8179e8082c	add preliminary MPC83xx support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18353 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-09 11:45:04 +00:00
nbd	8b71343ecd	backport a recent version of vsprintf to linux 2.6.28 to fix mac80211 wifi interface detection ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18352 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-09 00:58:44 +00:00
Lars-Peter Clausen	12f85f8a91	jz4740: Don't enable all clocks when booting. ... All clocks we need should allready be enabled by the bootloader.	2009-11-09 01:10:31 +01:00
Lars-Peter Clausen	c9cb830945	u-boot: Disable clocks we don't need ... We might gain a few more minutes battery runtime by this.	2009-11-09 00:44:26 +01:00
Lars-Peter Clausen	bc0684a065	jz4740: Remove imem and ipu support from proc ... It's not used and wastes 4MB of mem.	2009-11-09 00:25:34 +01:00
florian	4cf0969674	[rdc] remove empty wl153 profile after r18349 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18350 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 23:01:29 +00:00
florian	5a632e0fb1	[rdc] also support pcmcia ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18349 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:55:44 +00:00
florian	bda4e4e698	[rdc] move headers to arch/x86/include/asm/, patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18347 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:49:28 +00:00
Lars-Peter Clausen	928b8ba548	jz4740: Remove mmc file from proc section ... It does not make sense to keep it threre.	2009-11-08 23:48:53 +01:00
florian	010506fafc	[rdc] make sure rdc321x specific patches apply (CONFIG_X86_RDC321X), patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18346 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 22:48:19 +00:00
Lars-Peter Clausen	207ee3b6f5	u-boot: Don't initalize i2c and ssi gpio pins. ... We use neither.	2009-11-08 23:00:32 +01:00
hauke	c8e4b6534a	[amazon] Add some build fixes for kernel 2.6.21 and the infineon amazon target. ... Now it compiles with the new toolchain. These are mostly backports from mainline linux and newer linux kernels from openwrt. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18345 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-08 21:56:59 +00:00
florian	1fa447544a	[x86] add again missing hunk in vmlinux.lds.S ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18337 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 13:36:32 +00:00
florian	d076b12052	[x86] add missing hunk in the block2mtd patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18336 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 13:03:10 +00:00
florian	4a5b5bdb00	[brcm63xx] merge upstream fixes on mdio loop ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18335 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:48:17 +00:00
florian	a8a51aaf29	[kernel] refresh 2.6.31 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18334 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:45:41 +00:00
florian	90c331955e	[x86] add olpc 2.6.31 configuration, forward port the block2mtd patch, refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18333 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:32:25 +00:00
florian	bbd135050c	[x86] the olpc config that was merged from the olpc port is a 2.6.30 config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18332 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-07 12:16:31 +00:00
florian	6832337740	[rdc] provide the correct flash mapping on non airlink devices, remove the rootfs_type hacks, patch from sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18327 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 10:53:15 +00:00
florian	80bb9da84f	[rdc] add the prereq-check on lzma ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18326 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 08:47:28 +00:00
florian	91681580d6	[rdc] use host-side lzma decompression tool, lzma-4.32 from openwrt produces non-working bzImages, switch to 2.6.30, strip down kernel configuration ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18325 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-06 08:42:41 +00:00
florian	30d1329e80	[rdc] strip down even more the kernel configuration ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18324 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 23:40:12 +00:00
nbd	b9eaff23ad	remove the old alix led junk which was replaced by upstream code ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18320 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 16:16:32 +00:00
florian	1f00501340	[rdc] remove some other useless configuration items ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18314 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 13:21:55 +00:00
nbd	7954e8f37c	enable multicast routing for linux 2.4 (#6037) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18312 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-05 12:10:17 +00:00
florian	e0ac739a84	[rdc] remove useless configuration options ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18303 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 23:07:56 +00:00
agb	f11fdcc214	[rdc] 2.6.28: add flashmap and image support for the sitecom wl-176. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18300 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:44:02 +00:00
florian	9eea540afb	[rdc] include kmod-rdc321x-wdt by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18299 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:43:34 +00:00
florian	82ab0c04a1	[rdc] make rdc321-wdt become a package, saves some space in the kernel ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18298 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:43:05 +00:00
florian	4592820242	[kernel] add missing ledtrig-netdev dependency on the networking stack ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18297 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-04 22:21:13 +00:00
florian	47ef97e2e3	[brcm63xx] images without tagid now fallback to the untouched partition layout (#6093) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18288 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 19:59:04 +00:00
kaloz	fdd46a4e02	temporary remove the pfifo fast patch from 2.6.32, too ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18284 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 11:12:17 +00:00
kaloz	5f33b429e2	add preliminary 2.6.32 support ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18283 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 10:49:27 +00:00
florian	ea913739e9	[kernel] add more missing configuration symbols ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18282 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:24:44 +00:00
florian	78015b1b6d	[x86] refresh kernel patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18281 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:12:48 +00:00
florian	b8f6c2dc9e	[x86] use 2.6.31.5, left-over from r18279 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18280 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:12:20 +00:00
florian	ea8823c993	[x86] merge the olpc target with the x86 target, both tested and running ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18279 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-03 01:02:39 +00:00
florian	f6a11cc553	[olpc] increase the rootdelay value to ensure usb enumeration completes before block2mtd uses /dev/sdX ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18278 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:40:12 +00:00
florian	be9a42ea65	[rdc] add cpu identification patch from bifferos ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18277 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:10:14 +00:00
florian	550454d4b6	[rdc] forward port r18254 to 2.6.30 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18276 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:07:47 +00:00
florian	fd6919ffec	[kernel] refresh patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18275 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 23:05:47 +00:00
florian	b2f236b82b	[adm5120] fix compilation failure of adm5120-dbg.c with the removal of bus_id ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18274 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 15:55:16 +00:00
kaloz	4c1bc63b76	resync 2.6.30/2.6.31 patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18270 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 09:54:06 +00:00
kaloz	7e8dd669c9	Switch to the squashfs-lzma code from the squashfs-devel git tree. ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18267 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 09:51:35 +00:00
nbd	17747ab1ac	ixp4xx: fix weird ethernet issues with some devices caused by the ethernet packet size increase. ... despite what the docs day, 14320 is the largest working MRU value, not 16320 fixes #5785 for me git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18262 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-02 00:44:01 +00:00
blogic	d30299b51e	[ifxmips] adds dsl support, thank you infineon/lantiq ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18259 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 18:52:35 +00:00
agb	76e192d94c	[rdc] 2.6.28: remove zero-byte patch left by last commit ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18255 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 06:24:34 +00:00
agb	cbd083f77e	[rdc] 2.6.28: add ZyXEL and Amit flashmapping and start fixing up GPIO support. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18254 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 05:34:46 +00:00
agb	100ec06353	[brcm-2.4] fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18253 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-11-01 01:09:56 +00:00
juhosg	f622ac94c8	ixp4xx: the missing phy_disconnect call has been added in upstream, remove that patch ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18252 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 20:10:34 +00:00
juhosg	2d033cdc39	ixp4xx: remove bogus 'eth%d: MII PHY x on NPE-x' messages ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18251 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 20:10:30 +00:00
florian	56311db0ca	[olpc] alway include kmod-libertas by default ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18245 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-31 12:29:14 +00:00
florian	15e0985ea5	[rdc] refresh 2.6.30 kernel patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18231 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 16:24:52 +00:00
florian	ddcb850f7b	[kernel] fix build failures on include/scsi/scsi.h, spotted by udev compilation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18230 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 16:24:20 +00:00
juhosg	a1509a7028	ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 15:15:41 +00:00
juhosg	ad1488bf57	ar71xx: sync 2.6.31 kernel config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18227 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:28 +00:00
juhosg	1d2b1e7279	ar71xx: add preliminary support for the TL-WR841ND v5 board ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18226 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:25 +00:00
juhosg	0724c81c22	ar71xx: use soc specific divider for mdio clock ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18225 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:22 +00:00
juhosg	5be08769f3	ar71xx: update mdio_reset code ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18224 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:17 +00:00
juhosg	8b79390edb	ar71xx: add missing profiles for the TL-WR841ND v3 and MZK-W300NH boards ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18223 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:14 +00:00
juhosg	e75593217a	ar71xx: simplify image generation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18222 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 12:26:10 +00:00
florian	877e45fb1d	[kernel] remove no longer used configs and patches ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18221 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 09:55:53 +00:00
blogic	7a9d219092	[ramips] missing header file changes, and fix mtu value ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 09:18:40 +00:00
Xiangfu Liu	1652213e92	[U-BOOT] fix init	2009-10-30 15:44:24 +08:00
Lars-Peter Clausen	44e92dbd5d	gpm940b0: Select high driver frequency ... Fixes flicker.	2009-10-30 02:18:31 +01:00
thepeople	163074a14b	fix my typo ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18219 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 01:08:11 +00:00
thepeople	09e306ce30	add WRT350Nv1 target, thanks sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18218 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-30 01:05:37 +00:00
florian	5e0a41a041	[olpc] make the kernel also output on ttyS0 and ask openfirmware to unfreeze the screen ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18216 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 23:35:54 +00:00
florian	30576ebab8	[olpc] ext2 images need to wait for /dev/sda2 to appear before attempting to mount it, fixes olpc boot on ext2 images ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18215 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 23:34:39 +00:00
blogic	70916d05de	make etehrent work on wrt350n, thx sn9 ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18214 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 21:26:36 +00:00
blogic	f46dbe37e1	[ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 21:08:11 +00:00
florian	b08f29cbc9	[at91] fix u-boot installation ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18208 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 16:03:15 +00:00
florian	7ac41a58e0	[at91] fix u-boot linking failure with an EABI toolchain ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18207 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 16:00:37 +00:00
florian	6bc0d61369	[at91] fix dfboot linking failures (#5937) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18206 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 15:48:34 +00:00
florian	eb47209914	[brcm63xx] do not generate trx images, this is useless ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18204 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 13:39:29 +00:00
blogic	7616e48d77	[ramips] hopefully fixes dma issues seen on ethernet driver when under high load ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 12:51:45 +00:00
florian	24168b9159	[kernel] remove support for 2.6.27, no target is using it anymore ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18201 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 12:20:45 +00:00
florian	4a72ea39d6	[kernel] fix build failure on vmlinux.lds with 2.6.31 (#6052) ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18199 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 10:55:52 +00:00
florian	6ae3b70899	[kernel] move the forward declaration of struct mtd_info, prevents build failures on arm and mips ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18198 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-29 10:43:14 +00:00
kaloz	f0bcf0323b	ppc40x: use version number-less patches and config ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18188 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:20:31 +00:00
kaloz	e0af8557d2	remove 2.6.28 support from ppc40x ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18187 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:19:07 +00:00
kaloz	9096e2fed8	disable ppc4xx watchdog, it's unreliable ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18186 3c298f89-4303-0410-b956-a3cf2f4a3e73	2009-10-27 19:18:02 +00:00
Xiangfu Liu	6293205a75	font SUN8x16 is better	2009-10-28 03:13:33 +08:00
Xiangfu Liu	d0e8e5dbfc	update u-boot patch ... Signed-off-by: Xiangfu Liu <xiangfu@qi-hardware.com>	2009-10-28 03:13:33 +08:00
JieJing.Zhang	907a34b80e	jz_battery: fix bug cause kernel panic. ... all about container_of macro. Signed-off-by: JieJing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:33 +08:00
Xiangfu Liu	110c87a5f7	revert commit: 3dbe390f5347b6c279c9d193445e1c86fbee9894 ... those change make kernel panic.	2009-10-28 03:13:33 +08:00
Xiangfu Liu	8319e34599	fix the jz4740_pcm_mmap function ... now Ben can play online Radio	2009-10-28 03:13:33 +08:00
Jiejing.Zhang	96b315a920	add disable sound amp while sound not playback. ... This will save power of amp. Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:33 +08:00
Xiangfu Liu	6aec1a06bf	change system name form OpenWrt to BenNanoNote	2009-10-28 03:13:32 +08:00
Xiangfu Liu	6abb40220e	fix the comma and period key	2009-10-28 03:13:32 +08:00
Xiangfu Liu	fa7ec6d7d6	enable the speaker	2009-10-28 03:13:32 +08:00
Xiangfu Liu	e64a14b4fd	enable the sound as default	2009-10-28 03:13:32 +08:00
Xiangfu Liu	3843e5f1af	upgrade u-boot to 2009.08	2009-10-28 03:13:32 +08:00
Lars-Peter Clausen	9eff41dbb1	qi_lb60: Initalize nand paritions and ecc layout depending on the chip size.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	cc05485408	jz4740_nand: Add ident_callback ... Add ident_callback which is called after the nand chip has been identified and before it is setup. This can be used by board code to set partition and ecc info depending on the chip.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	7fa87373a8	mach-jz4740: Move all non generic code from platform.c to board-qi_lb60.c ... platform.c should only contain the generic platform device definitons, everything board specific should go into the board file.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	5709f560f9	Cleanup qi-lb60 board code.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	9c229a412e	Remove old ingenic framebuffer drivers. ... I think it's time to get rid of these	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	c84ef25bf3	Merge patches into files.	2009-10-28 03:13:31 +08:00
Lars-Peter Clausen	c456866a4a	jz4740_fb: Properly initalize physical video memory address	2009-10-28 03:13:31 +08:00
Florian Fainelli	7df7bde3ac	refresh xburst patches	2009-10-28 03:13:30 +08:00
Xiangfu Liu	767987c14e	cleaup code style	2009-10-28 03:13:30 +08:00
Xiangfu Liu	d89fdafa97	update power button patch	2009-10-28 03:13:30 +08:00
Mirko Vogt	e818ccc989	use the linux kernel version 2.6.31 (final)	2009-10-28 03:13:30 +08:00
Xiangfu Liu	3dde1ac212	code style cleanup jz4740_nand.c	2009-10-28 03:13:30 +08:00
Xiangfu Liu	ce96b1f2a5	remove init WAKEUP in board-qi_lb60 file	2009-10-28 03:13:30 +08:00
Xiangfu Liu	4fc4138e68	add power button driver	2009-10-28 03:13:30 +08:00
Xiangfu Liu	2f3ac925c4	cleanup-gpm940b0-code-style.patch	2009-10-28 03:13:29 +08:00
Xiangfu Liu	1649bbc3d6	make poweroff command work	2009-10-28 03:13:29 +08:00
Xiangfu Liu	71e391515f	cleanup modifier keys driver	2009-10-28 03:13:29 +08:00
Mirko Vogt	a1ef81c12e	enable ext3 and (v)fat by default	2009-10-28 03:13:29 +08:00
Mirko Vogt	090ea365ad	disabled MMC debug output in default config	2009-10-28 03:13:29 +08:00
Mirko Vogt	204259721b	do not use default device type <router> as we do not need dnsmasq, ppp, iptables, etc. for now	2009-10-28 03:13:29 +08:00
Mirko Vogt	c2696d65ee	use rootwait instead of rootdelay as it is mor dynamic - however there's no delay needed anyway when booting from nand	2009-10-28 03:13:28 +08:00
Jiejing.Zhang	cd0d71a697	jz-battery: improve code. clear static var. ... 1. clear static global var, use platform_get_drvdata. 2. check gpio state before register power supply. Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:28 +08:00
Mirko Vogt	45c720faff	add base files for ... - assigning IP 192.168.1.1 per default to usb0-interface (usb-ethernet-gadget) - add mountpoint for 1st partrition of sd-card - prelimary for testing purposes	2009-10-28 03:13:28 +08:00
Xiangfu Liu	2b24518947	enable printk_time	2009-10-28 03:13:28 +08:00
Jiejing.Zhang	c91cec083b	jz_battery: improve driver code. ... 1. put all gobal var to a driver info struct. 2. check gpio before use it. Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>	2009-10-28 03:13:28 +08:00
Lars-Peter Clausen	ae01e2fb2c	Add jz4740-adc.h	2009-10-28 03:13:28 +08:00
Lars-Peter Clausen	90dc5a173c	jz4740-ac: Fix some small bugs	2009-10-28 03:13:27 +08:00
Lars-Peter Clausen	bdbda932b8	Compile fix jz4740-battery.c, use adc driver and some other minor cleanups. ... Enable adc and battery.	2009-10-28 03:13:27 +08:00
Lars-Peter Clausen	7a88b927f8	Add jz4740 ADC driver.	2009-10-28 03:13:27 +08:00
Xiangfu Liu	7c9aa25b12	refresh patch	2009-10-28 03:13:27 +08:00
Xiangfu Liu	9e02463e3e	add jz4740_batt.h	2009-10-28 03:13:27 +08:00
Xiangfu Liu	9e7f1e7f1a	remove the JZ_BAT_XXX_VOLTAGE define	2009-10-28 03:13:27 +08:00
Jiejing.Zhang	5878098ab3	cleanup more about battery gpio and platform data	2009-10-28 03:13:26 +08:00
Lars-Peter Clausen	4c36a20b10	Add jz4740-rtc driver.	2009-10-28 03:13:26 +08:00
Lars-Peter Clausen	9480e0470b	jz4740_fb: Add include guards	2009-10-28 03:13:26 +08:00
Xiangfu Liu	65051a9ad5	cleanup-qi_lb60.h	2009-10-28 03:13:26 +08:00
Xiangfu Liu	cd6b976c21	revert the keyboard.c code. just change the defkeymap.map make all keys work ... also the [Euro] [Degree] [Umlaut] work	2009-10-28 03:13:26 +08:00
Xiangfu Liu	04429a1771	Fn-modifier-keys-work	2009-10-28 03:13:26 +08:00
Lars-Peter Clausen	918f1072ed	Remove i2c.	2009-10-28 03:13:26 +08:00
Xiangfu Liu	08996e7e50	add defkeymap.c, fix the CAPSLOCK not work	2009-10-28 03:13:26 +08:00
Lars-Peter Clausen	4230547879	Some build fixes.	2009-10-28 03:13:26 +08:00
Lars-Peter Clausen	daab2fae9a	jz4740: More udc cleanup. Enable usb ethernet gadget.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	0a70a90d30	jz4740: irq and dma cleanups.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	f5d7bb60e5	Add qi lb60 sound soc board driver.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	557e48bc8e	Some build fixes.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	4be762051b	Remove 0002-qi_lb60_support_patch.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	9b4d9a94d6	Oops... those where missing from commit cbecf6e9f1	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	8bb63272c3	jz4740 asoc: Add new internel codec driver. ... Add qi lb60 board support. Remove unneeded files.	2009-10-28 03:13:25 +08:00
Lars-Peter Clausen	299c9e29ef	jz4740: More udc cleanup. Enable usb ethernet gadget.	2009-10-28 03:13:24 +08:00
Lars-Peter Clausen	8c57ef78b6	jz4740: Cleanup Kconfig	2009-10-28 03:13:24 +08:00
Lars-Peter Clausen	fdeff24f83	jz4740: irq and dma cleanups.	2009-10-28 03:13:24 +08:00
Lars-Peter Clausen	d763dfdb80	jz4740_nand: Fix compiler warning	2009-10-28 03:13:24 +08:00
Xiangfu Liu	764fdaf217	unset CONFIG_MMC_BLOCK_BOUNCE make sd card work ... the RedUpPoint combination keys work. [Fn] combination not work	2009-10-28 03:13:24 +08:00
Lars-Peter Clausen	935e79e5ab	More udc cleanup	2009-10-28 03:13:24 +08:00
Lars-Peter Clausen	88f159b443	Cleanup udc driver (a bit).	2009-10-28 03:13:23 +08:00
Xiangfu Liu	055e2e36f7	update cmdline	2009-10-28 03:13:23 +08:00
Xiangfu Liu	89c608c1a0	update cmdline, default boot to nand. u-boot bootdelay set to 0	2009-10-28 03:13:23 +08:00
Mirko Vogt	ee1bee1421	use new display- and fbdriver	2009-10-28 03:13:23 +08:00
Mirko Vogt	c16999abab	get rid of obsolete kernel patches and -configs	2009-10-28 03:13:23 +08:00
Mirko Vogt	c64bbe21ab	refresh config - use openwrt boot logo	2009-10-28 03:13:22 +08:00
Mirko Vogt	be2beb8dd3	add openwrt boot logo	2009-10-28 03:13:22 +08:00
Mirko Vogt	98d2317905	fix typo	2009-10-28 03:13:22 +08:00
Xiangfu Liu	281d29e9b7	fix the kernel compile error in openwrt ... the patch folder is not correct	2009-10-28 03:13:22 +08:00
Lars-Peter Clausen	1976b23d08	Set correct color sequnce. ... Add a debug sysfs entry reg which gives direct write access to lcms display registers.	2009-10-28 03:13:21 +08:00
Lars-Peter Clausen	3a1ece5ea7	Add lcm driver.	2009-10-28 03:13:21 +08:00
Lars-Peter Clausen	430fba9852	Fix typo.	2009-10-28 03:13:21 +08:00
Lars-Peter Clausen	b8419470a2	Add clock support. Mostly untested.	2009-10-28 03:13:21 +08:00
Xiangfu Liu	fd21fd92e0	make kernel default compile for 2GB NAND flash board	2009-10-28 03:13:21 +08:00
Xiangfu Liu	bdad94fa1a	git rebase with master ... fix the patch erro after rebase	2009-10-28 03:13:21 +08:00
Xiangfu Liu	4c6e0c02ed	this option make MMC driver alwasy work when boot	2009-10-28 03:13:20 +08:00
Xiangfu Liu	5b983412c7	add-2gb-nand-support ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:20 +08:00
Xiangfu Liu	26795803ce	fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:20 +08:00
Xiangfu Liu	701937f9f1	this option make MMC not use DMA, so remove this option ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:20 +08:00
Xiangfu Liu	9ac5dc2ca3	try to add lb60 to 2.6.31 kernel ... this is not the work patch. just show some work progress. Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:19 +08:00
Xiangfu Liu	f81c2213a2	add-2.6.24-kernel-patch ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:19 +08:00
Mirko Vogt	59095d9f64	Revert "change default baudrate to 115200" ... This reverts commit 03acb399060bc7b9013f3776b8697915389b4592.	2009-10-28 03:13:18 +08:00
Mirko Vogt	f010e75458	change default baudrate to 115200	2009-10-28 03:13:18 +08:00
Xiangfu Liu	b9ae82b25f	split-0002-patch ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:18 +08:00
Xiangfu Liu	f5e43476d3	update-kernel-config ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:18 +08:00
Xiangfu Liu	81c4391daf	[U_BOOT]add-2GB-nand-support.patch ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:18 +08:00
Marek Lindner	da2604ac53	[xburst] remove the dash from the filenames	2009-10-28 03:13:17 +08:00
Marek Lindner	2757527f5e	inital architecture layout ... Signed-off-by: Florian Fainelli <florian@openwrt.org>	2009-10-28 03:13:16 +08:00
Xiangfu Liu	ee8a609caf	fix [SHIFT,CAPSLOCK] key define ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	a66785b06c	Add gpio pin definitions and functions to configure a pin as a function pin.	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	8fbe4ebda0	Enable ubi/ubifs and nand verify writes.	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	297d16a6ec	Aligen framebuffer data at page boundary.	2009-10-28 03:13:15 +08:00
Xiangfu Liu	93a92952e6	update-config-file ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:15 +08:00
Xiangfu Liu	20ae439824	fix u-boot eccpos change it to 12 ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	e4334246a3	Allocate jffs2 summery buffer with vmalloc.	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	a65fb5ef2d	reserve bad block area in oob data.	2009-10-28 03:13:15 +08:00
Xiangfu Liu	3aa5222095	revert the jzlcd.h configure to fit the patch file. ... remove 51-fb.patch. we have 051-fb.patch. Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:15 +08:00
Lars-Peter Clausen	35fedaa9e4	Fix some problems in the framebuffer driver.	2009-10-28 03:13:14 +08:00
Lars-Peter Clausen	ebc8c5a149	Add framebuffer driver for the jz4720/jz4740. It's not complete yet but provides ... enough for qi_lb60 support.	2009-10-28 03:13:14 +08:00
Lars-Peter Clausen	8e033878c9	Add missing irq defintions for gpio, build gpio module and select necessary ... symbols for gpio lib.	2009-10-28 03:13:14 +08:00
Lars-Peter Clausen	b85721d95f	Add matrix keyboard to config.	2009-10-28 03:13:14 +08:00
Lars-Peter Clausen	1cbf56a99d	Fix gpio initialisation.	2009-10-28 03:13:14 +08:00
Xiangfu Liu	e20cd0d3eb	fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:14 +08:00
Xiangfu Liu	b5904054fb	make lcd work in 2.6.31 ... fix typo in driver/video/Makefile add some option to driver/video/Kconfig update the .config file. Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:14 +08:00
Mirko Vogt	023bdebb28	add config for 2.6.31 - might need some more love	2009-10-28 03:13:14 +08:00
Mirko Vogt	e765a38f5c	switch to linux kernel version 2.6.31-rc6 by default as the generic patchset for 2.6.31 went upstream	2009-10-28 03:13:14 +08:00
Xiangfu Liu	f4db617ed0	change the u-boot and kernel image name ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:13 +08:00
Xiangfu Liu	bb05897208	make the 2.6.31-rc6 compiled in openwrt. ... *add layer7_2 patch fix the iptables compile error *remove the 'sizes.h' include in jz_mmc.c *chmod -x jz_mmc.* *not make uImage in Makefile, let openwrt do it. Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:13 +08:00
Xiangfu Liu	10b1e8ca0c	cleanup the 2.6.31-rc6 050-nand.patch 200-qi_lb60.patch ... there is repeat code in platform.c file and 050-nand.patch make 200-qi_lb60.patch no warning. Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:13 +08:00
Lars-Peter Clausen	7d446f792e	Add 2.6.31 patches and files.	2009-10-28 03:13:13 +08:00
Xiangfu Liu	f58d88c0f1	this option make MMC not use DMA, so remove this option ... Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>	2009-10-28 03:13:13 +08:00