1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 09:42:49 +02:00
Commit Graph

7309 Commits

Author SHA1 Message Date
juhosg
8daecfbcff ar71xx: add support for TL-WR740N v1
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-23 12:42:16 +00:00
kaloz
f4380ab731 [target/avr32]: upgrade u-boot to v2010.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-23 00:08:55 +00:00
hauke
011ddd359b kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 19:44:54 +00:00
hauke
4607d4ead2 kernel: refresh patches with kernel 2.6.37-rc7
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 19:43:25 +00:00
hauke
9e9c3a1798 brcm47xx: refresh patches with kernel 2.6.37-rc7
The deleted patches went upstream in 2.6.37-rc7


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 19:42:37 +00:00
hauke
6f210ed73c uml: this patch went upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 18:20:50 +00:00
hauke
fb3616ed90 adm5120: make patches apply again and refresh them
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 17:19:36 +00:00
hauke
70befa4020 kernel: use tab in front of ledtrig-netdev.o and refresh kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24798 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-22 17:18:11 +00:00
hauke
0d64872f8e brcm47xx: wgt634u mac address fix
The Netgear wgt634u uses minus between the hex digest of the mac 
address and all other broadcom devices are using colons between the hex 
digest. Now the mac address is correctly parsed also when minus is used.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-21 13:34:09 +00:00
blogic
9236d3bed9 [lantiq]
* fixes duplicate registration of dwc_otg usb core


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-20 17:56:09 +00:00
claudio
898076f479 [ar71xx] unifi: add sysupgrade and leds support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-20 17:28:34 +00:00
nbd
a3978a4a41 mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-20 14:25:25 +00:00
jow
eaa631d6d8 [generic] fix layer7 patches for Kernels >= 2.6.35, thanks Daniel Gimpelevich
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 16:46:47 +00:00
nbd
ee10caa56c ar71xx: enable ar7240 switch support on the UBNT NanoStation M
Fixes broadcast frames on the second ethernet MAC

Signed-off-by: Alexander Couzens <lynxis@c-base.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24723 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 11:56:42 +00:00
juhosg
af62c5dff0 ar71xx: fix micrel phy patch (Patch from #8041.)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 10:05:55 +00:00
juhosg
010807acc0 generic: fix min/max confusion in jffs2_sum_init on 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 20:34:26 +00:00
juhosg
1f36168c60 ar71xx: remove stray semicolons
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:57:20 +00:00
juhosg
1eb912f20a ar71xx: fix WLAN LEDs on the DIR-825 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:21 +00:00
juhosg
3e6bf9586d ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:19 +00:00
juhosg
133f6e8495 ar71xx: use usbdev trigger for USB LEDs by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24648 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:16 +00:00
juhosg
f7a210d168 generic: add LED trigger for USB device presence/activity
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24646 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:11 +00:00
juhosg
9d26c3eda1 generic: add usb_find_device_by_name helper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:08 +00:00
juhosg
97b250affa generic: nuke 2.6.33 specific stuff, is not used by any platform
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:04 +00:00
juhosg
579e608a9b ar71xx: UBNT Secondary MAC address duplicate fix
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:01 +00:00
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:09:57 +00:00
hauke
83e00dce42 brcm47xx: add ssb debug option.
This fixes a problem with wrt350n. 
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:35:59 +00:00
hauke
22d5936ba2 brcm47xx: add some missing pci ID for tg3 driver
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:31:05 +00:00
hauke
ff51b55992 brcm47xx: this patch went upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-16 19:26:55 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 19:55:50 +00:00
juhosg
786449614f ar71xx: UBNT M-Series MAC address fix
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 19:55:47 +00:00
kaloz
7a9fbd9d70 revert r24604
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 12:24:27 +00:00
acoul
c86e814be4 target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-15 12:15:46 +00:00
juhosg
5270be5f80 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 18:01:04 +00:00
juhosg
6cc1945af5 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 18:01:00 +00:00
blogic
d6de09a810 [lantiq]
* make the usb gpio configurable
* 105-header_xway.patch has a corrupt line count in it


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 13:02:49 +00:00
juhosg
c4174021ac ramips: remove 2.6.3[24] support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:31 +00:00
juhosg
a12045ff00 ramips: switch to 2.6.36
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:29 +00:00
juhosg
779b986847 ramips: handle OTG interrupt on the RT305x SoC
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 08:00:25 +00:00
kaloz
26090b8684 [sparc]: bump kernel version, add MAINTAINER entry
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 07:58:24 +00:00
kaloz
386183ac6e add plemininary ultrasparc support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14 07:57:22 +00:00
hcg
391e5d3423 [gumstix] Update package selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-13 12:59:22 +00:00
jow
75f4300764 [kirkwood] enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-13 10:06:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-13 08:01:21 +00:00
blogic
18a076fccd [lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-12 22:57:16 +00:00
hauke
9f96922892 kernel: update kernel versions
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-11 16:07:21 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 19:55:28 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 18:59:58 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10 17:57:40 +00:00