qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 07:26:17 +02:00
Code
19,189 Commits 13 Branches 0 Tags 117 MiB
84ea49f558
Commit Graph

7285 Commits

Author SHA1 Message Date
juhosg
84ea49f558 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24642 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-17 17:09:57 +00:00
hauke
83e00dce42 brcm47xx: add ssb debug option. 
This fixes a problem with wrt350n. 
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:35:59 +00:00
hauke
22d5936ba2 brcm47xx: add some missing pci ID for tg3 driver 
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676

Thank you sn9 for fixing this problem.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:31:05 +00:00
hauke
ff51b55992 brcm47xx: this patch went upstream 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-16 19:26:55 +00:00
juhosg
2427a1a5f9 ar71xx: add wlan led for the TL-WR941ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:50 +00:00
juhosg
786449614f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 19:55:47 +00:00
kaloz
7a9fbd9d70 revert r24604 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:24:27 +00:00
acoul
c86e814be4 target/linux: clean up non generic & obsolete kernel options for 2.6.36, 2.6.37 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-15 12:15:46 +00:00
juhosg
5270be5f80 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:04 +00:00
juhosg
6cc1945af5 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 18:01:00 +00:00
blogic
d6de09a810 [lantiq] 
* make the usb gpio configurable
* 105-header_xway.patch has a corrupt line count in it


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 13:02:49 +00:00
juhosg
c4174021ac ramips: remove 2.6.3[24] support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:31 +00:00
juhosg
a12045ff00 ramips: switch to 2.6.36 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:29 +00:00
juhosg
779b986847 ramips: handle OTG interrupt on the RT305x SoC 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 08:00:25 +00:00
kaloz
26090b8684 [sparc]: bump kernel version, add MAINTAINER entry 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:58:24 +00:00
kaloz
386183ac6e add plemininary ultrasparc support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-14 07:57:22 +00:00
hcg
391e5d3423 [gumstix] Update package selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 12:59:22 +00:00
jow
75f4300764 [kirkwood] enable mach support for OpenRD Base and OpenRD Client (#8417), spare the rest 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 10:06:40 +00:00
nbd
574f469e14 base-files: use shutdown instead of stop when the system goes down (patch by tripolar) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-13 08:01:21 +00:00
blogic
18a076fccd [lantiq] adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-12 22:57:16 +00:00
hauke
9f96922892 kernel: update kernel versions 
Update kernel 2.6.32.26 to 2.6.32.27
Update kenrel 2.6.36.1 to 2.6.36.2


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-11 16:07:21 +00:00
juhosg
29d3358e2b ar71xx: add missing files for the JA76PF board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 19:55:28 +00:00
cshore
636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 18:59:58 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
juhosg
c7e80fcfbb ar71xx: add default network configuration file for the TL-MR3420 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:40 +00:00
nbd
c5d8ec2df5 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 16:07:27 +00:00
juhosg
12e58b40f8 ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24421 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:08 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
acoul
da5f577b16 linux/generic: update & refresh 2.6.36 & 2.6.37. (closes #8324) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 21:20:40 +00:00
kaloz
ca1f565dd9 add optimization to Freescale targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 11:27:06 +00:00
juhosg
602f2d5e4f ramips: ramips_esw: add more definitions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:33 +00:00
juhosg
ec52e89b08 ramips: ramips_esw: add helper function to set pvid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:28 +00:00
juhosg
4059133e7d ramips: ramips_esw: add helper function to set vlan members 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:25 +00:00
juhosg
9e9816322c ramips: ramips_esw: add helper function to set VLAN id 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:22 +00:00
juhosg
293e4ff8cc ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:16 +00:00
juhosg
8b6afc3a6a ramips: ramips_esw: use rt305x_esw prefix in function names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:14 +00:00
juhosg
808e953c0a ramips: ramips_esw: coding style cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:12 +00:00
juhosg
39deae4b99 ramips: ramips_esw: add defines for switch register offsets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:07 +00:00
juhosg
1600b801ec ramips: ramips_esw: don't touch GPIO_PURPOSE register 
It must have been set by the board initialization code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:04 +00:00
juhosg
bc4cb1b39f ramips: ramips_esw: convert it to be a platform driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:15:00 +00:00
juhosg
a3373ca948 ramips: ramips_esw: move hardware initialization into a separate function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:58 +00:00
juhosg
1fcc0bf36c ramips: ramips_esw: use a private structure for the functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 10:14:54 +00:00
kaloz
fa9c65f417 ethernet driver fixup for ppc4xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24328 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 08:59:31 +00:00
cshore
deb8dba13c [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:31 +00:00
cshore
a2e7591047 [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:28 +00:00
cshore
860ae4cdbc [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-08 00:40:24 +00:00
cshore
94d30e3699 [generic] flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 19:45:08 +00:00
cshore
87b570ee61 [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:32:29 +00:00
cshore
c73f40600d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-07 17:02:31 +00:00