qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-02 15:05:55 +02:00
Code
21,940 Commits 13 Branches 0 Tags 117 MiB
867f0fa967
Commit Graph

18 Commits

Author SHA1 Message Date
juhosg
08d268c8a7 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e ar71xx: ag71xx: nuke ar7240sw_init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 13:25:20 +00:00
juhosg
3095cc8090 ar71xx: ag71xx: add support for getting switch port link status 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-13 11:27:04 +00:00
nbd
33f4cde7a9 ar71xx: remove dead code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:20 +00:00
nbd
4677737b0a ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-08 00:33:15 +00:00
nbd
3bad82d2e7 ar71xx: reinitialize global switch settings after reset on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:47 +00:00
nbd
340551c062 ar71xx: configure address aging on ar7240 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-20 14:39:42 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:12:56 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:36 +00:00
nbd
7569a2e88f ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:29 +00:00
juhosg
cbd9e227db ar71xx: use pr_* functions in drivers 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:12 +00:00
juhosg
c0734b8ffe ar71xx: return statements does not need parenthesis 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:38 +00:00
juhosg
2adda3cec6 ar71xx: wrap long lines 
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:04 +00:00
juhosg
b6dbd83901 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:50:29 +00:00
nbd
8c032f3c80 ar71xx: fix more section mismatches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-21 18:42:16 +00:00
nbd
5cc1f4bcf3 ar71xx: add a new driver for the ar7240 switch using swconfig. 
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-16 19:21:57 +00:00