florian
|
749f338dab
|
[brcm63xx] bcm6345 fixes from AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17153 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-08-06 20:33:42 +00:00 |
|
florian
|
ef9fbab1eb
|
[brcm63xx] fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17149 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-08-06 18:53:44 +00:00 |
|
florian
|
1a7361a529
|
[brcm63xx] disable watchdog for bcm6345 until it gets fixed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17148 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-08-06 18:44:20 +00:00 |
|
florian
|
47ffc5ca6a
|
[brcm63xx] more bcm6345 fixes and definitions, thanks to AndyI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17066 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-31 20:15:43 +00:00 |
|
florian
|
5abca50d4d
|
[brcm63xx] add experimental support for 2.6.28.10, tested on bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17054 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-30 21:29:25 +00:00 |
|
florian
|
efb3430f85
|
[brcm63xx] fix typo for the flash start address on bcm6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17032 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-27 22:31:28 +00:00 |
|
florian
|
8a891d72ed
|
[brcm63xx] register GPIO-connected LEDs for known boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16887 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-18 00:40:23 +00:00 |
|
florian
|
ef5e1c89b8
|
[brcm63xx] fix comment only valid for bcm6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16881 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-17 15:57:09 +00:00 |
|
florian
|
c33ead0f7c
|
[brcm63xx] add the infrastructure to use a MPI/GPIO connected VoIP DSP
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16650 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-01 21:00:41 +00:00 |
|
florian
|
69aab5b0cc
|
[brcm63xx] fixes for the bcm6338 clocks, thanks Maxime
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16640 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-07-01 13:49:20 +00:00 |
|
florian
|
e4fd15b644
|
[brcm63xx] a couple of more fixes to get 6345 booting up to the console handover
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16636 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-30 13:45:49 +00:00 |
|
florian
|
e98b808013
|
[brcm63xx] shared DMA zone is twice smaller on 6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16608 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-28 20:06:44 +00:00 |
|
florian
|
71f8a2e36b
|
[brcm63xx] bcm6338 can support PCI since it has MPI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16592 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 21:43:55 +00:00 |
|
florian
|
5a3fb95802
|
[brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16589 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 20:32:43 +00:00 |
|
florian
|
f8da08ef39
|
[brcm63xx] fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16587 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 18:58:00 +00:00 |
|
florian
|
dde3611c93
|
[brcm63xx] fix a stupid typo preventing the board from being detected
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16586 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 18:30:45 +00:00 |
|
florian
|
4606c7b6ec
|
[brcm63xx] prevent bcm6338 and bcm6345 from crashing very early
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16585 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 18:23:58 +00:00 |
|
florian
|
98724ee830
|
[brcm63xx] only register fallback sprom and enable PCI if we actually have support for PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16581 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 16:17:18 +00:00 |
|
florian
|
55f1505efd
|
[brcm63xx] more missing register definitions for bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16579 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-27 15:51:27 +00:00 |
|
florian
|
8b459b8327
|
[brcm63xx] more bcm6338 and bcm6345 related fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16568 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-26 12:34:35 +00:00 |
|
florian
|
b0b6441b42
|
[brcm63xx] define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16567 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-26 11:08:12 +00:00 |
|
florian
|
b6e07cbdbb
|
[brcm63xx] add board definitions for the bcm6338w
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16565 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-26 10:27:13 +00:00 |
|
florian
|
415b07a0e8
|
[brcm63xx] be SMP safe even with gpiolib
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16331 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-04 10:02:23 +00:00 |
|
florian
|
9486190f3f
|
[brcm63xx] cache gpio values in gpio_set
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16330 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-04 10:01:55 +00:00 |
|
florian
|
848fab305c
|
[brcm63xx] use the correct number of GPIOs for bcm6358
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16329 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-04 10:01:03 +00:00 |
|
florian
|
f1fc76fbaa
|
[brcm63xx] register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16328 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-06-04 09:59:28 +00:00 |
|
florian
|
dae9860357
|
[brmc63xx] register gpiodev
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15509 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-04-30 14:09:01 +00:00 |
|
florian
|
d28ed969b1
|
[brcm63xx] enable all blocks on 6338 and uart clock on 6345
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14957 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-21 10:50:44 +00:00 |
|
florian
|
3a02e3c605
|
[brcm63xx] add support for bcm6345 SoC, needs testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14953 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-20 15:08:02 +00:00 |
|
florian
|
e41d42803f
|
[brcm63xx] fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14914 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-17 11:28:54 +00:00 |
|
florian
|
de1e7c94c8
|
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-12 08:54:04 +00:00 |
|
florian
|
af780d06cb
|
[brcm63xx] do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14848 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-11 10:32:44 +00:00 |
|
florian
|
9701c553e5
|
[brcm63xx] fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14790 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-08 12:43:13 +00:00 |
|
florian
|
ae7c55dd76
|
[brcm63xx] compile and register SPI controller device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14789 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-08 12:18:26 +00:00 |
|
florian
|
3ef02b142c
|
[brcm63xx] make bcm6358 consistend with the other boards naming
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14788 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-08 12:17:19 +00:00 |
|
florian
|
a5c53df418
|
[brcm63xx] fix some SPI register definitions and platform-device registration code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14787 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-08 12:13:52 +00:00 |
|
florian
|
8bd259b281
|
[brcm63xx] prepare for SPI controller driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14755 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-03-06 01:15:00 +00:00 |
|
florian
|
95ed72af25
|
[brcm63xx] provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14683 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-02-27 15:48:23 +00:00 |
|
florian
|
d7f409f4c7
|
[brcm63xx] move the device registration to an earlier initcall level, required for fallback SPROM to work
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14681 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-02-27 15:18:34 +00:00 |
|
florian
|
68a5bde10c
|
[brcm63xx] add support for user9102 boards (#4537)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-01-31 16:01:20 +00:00 |
|
florian
|
8199c5026d
|
[brcm63xx] Add board definitions for the Davolink DV201AMR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14263 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-01-29 14:54:13 +00:00 |
|
florian
|
f5c4c34c53
|
[brcm63x] frequency is in Hz, thanks Joel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14067 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-01-17 15:29:36 +00:00 |
|
florian
|
ecbc607802
|
[brcm63xx] allow bcm6338 to get the base address of the memory controller register, required to detect memory size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14047 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2009-01-15 22:42:22 +00:00 |
|
florian
|
278549f6d4
|
[brcm63xx] add board registration of the bcm96338gw
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13693 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-19 17:24:29 +00:00 |
|
florian
|
01926e6150
|
[brcm63xx] 6338 has no PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13692 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-19 17:08:11 +00:00 |
|
florian
|
693a86d5d0
|
[brcm63xx] add experimental support for bcm6338
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13691 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-19 17:05:09 +00:00 |
|
florian
|
e830a5a13e
|
Register watchdog driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13690 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-19 15:00:33 +00:00 |
|
florian
|
4b366ae8b2
|
Add bcm63xx_wdt but do not enable it yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13677 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-17 14:06:03 +00:00 |
|
florian
|
43af26b163
|
Add support for Sagem F@ST2404 (#4332)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13583 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-10 16:13:41 +00:00 |
|
florian
|
4e6eab38e5
|
Enable ohci on bcm96348gw
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13549 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2008-12-08 16:25:41 +00:00 |
|