qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-27 17:04:14 +02:00
Code
20,570 Commits 13 Branches 0 Tags 117 MiB
940317dc35
Commit Graph

193 Commits

Author SHA1 Message Date
juhosg
940317dc35 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27039 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:07 +00:00
nbd
debcf79f90 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:08:01 +00:00
nbd
20aef6d6fc ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-30 23:07:57 +00:00
matteo
483991c363 ar71xx: detect link on LAN ports 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-17 11:12:56 +00:00
matteo
51053e7640 use correct macros and frame size in ag71xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-14 23:10:06 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:26 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:25 +00:00
juhosg
f2a69b10a8 ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq 
Also initialize that for each SoC and print its value along with the
other frequencies.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:52 +00:00
juhosg
7072aeaf32 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:10 +00:00
nbd
7569a2e88f ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26393 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:29 +00:00
nbd
fd5cb87889 ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26392 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-02 00:47:25 +00:00
juhosg
017387d91d ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-09 09:29:45 +00:00
juhosg
4355718b98 ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:45 +00:00
juhosg
cc04995115 ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:28 +00:00
juhosg
cbd9e227db ar71xx: use pr_* functions in drivers 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:52:12 +00:00
juhosg
b0acc8feff ar71xx: drivers/rb4xx_nand: remove C++ comment usage 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:55 +00:00
juhosg
c0734b8ffe ar71xx: return statements does not need parenthesis 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23979 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:38 +00:00
juhosg
74ed307c1e ar71xx: fix inline attribute location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23978 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:21 +00:00
juhosg
2adda3cec6 ar71xx: wrap long lines 
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23977 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:51:04 +00:00
juhosg
b6dbd83901 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23975 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-12 18:50:29 +00:00
nbd
8c032f3c80 ar71xx: fix more section mismatches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-21 18:42:16 +00:00
nbd
0a95e857aa ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-21 18:42:11 +00:00
nbd
8631d395e1 ar71xx: increase rb4xx nand kernel partition size (patch by danimo) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-07 14:27:34 +00:00
juhosg
d1f333874d ar71xx: rewrite SPI drivers for the RB4xx boards 
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22863 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-31 20:13:47 +00:00
nbd
5cc1f4bcf3 ar71xx: add a new driver for the ar7240 switch using swconfig. 
hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway
switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested
fixes #7563

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22675 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-16 19:21:57 +00:00
nbd
f3814337f1 ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-06 12:40:07 +00:00
nbd
d856215f02 ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-04 02:15:08 +00:00
nbd
950d12ef69 ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down 
fixes boot time crashes under load reported by matteo

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-04 01:31:33 +00:00
juhosg
17cb46ca8a ar71xx: fix leds-rb750 build failure on 2.6.34 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22016 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-01 14:49:06 +00:00
juhosg
e3ad321217 ar71xx: fix build error in the rb{4xx,750}_nand drivers on 2.6.34/35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21736 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-09 15:31:34 +00:00
juhosg
c2a2341e50 ar71xx: fix 2.6.34 build errors 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-07 09:18:13 +00:00
nbd
2a9dd36f43 ag71xx: remove rx alignment code for small packets, it seems to break ipv6 for some reason (fixes #7236) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 16:39:13 +00:00
nbd
ea9bbe955d ar71xx: fix up alignment handling 
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary

tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-15 23:31:17 +00:00
juhosg
da7aaa905b ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions 
Cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20751 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-09 08:40:06 +00:00
juhosg
c74f817d15 ar71xx: ag71xx: call the phy driver's netif_receive_skb() 
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.

This fixes the header mangling of the AR8216 driver.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-09 08:38:46 +00:00
juhosg
040ee7aa28 ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024) 
* cc: backfire@openwrt.org


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20673 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-03 13:59:08 +00:00
juhosg
8299299524 ar71xx: update image generation and trx header parsing for the WRT160NL 
* patch by Bernhard Loos
 * note: trailing whitespaces has been removed


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 17:38:36 +00:00
juhosg
90c499bfa0 ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20506 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 13:05:27 +00:00
juhosg
1a729d6932 ar71xx: ag71xx: introduce ag71xx_has_ar8216() helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20505 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 13:05:24 +00:00
juhosg
51763ff18e ar71xx: ag71xx: reorganize ag71xx_rx_packet function 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 13:05:20 +00:00
juhosg
afa983c991 ar71xx: ag71xx: Add netpoll support 
This patch adds support for polling interrupts, used by
netconsole and the likes.

Tested on d-link dir-615 C1 using netconsole.

Signed-off-by: Pat Erley <pat-lkml@erley.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 13:05:17 +00:00
agb
651c537f30 [ar71xx] wrt400n: lan ports don't need the ar8216 workaround 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-26 19:09:11 +00:00
juhosg
e6e9309426 ar71xx: change PHY select logic, and update phy_masks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20358 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-21 18:16:07 +00:00
juhosg
2feb525193 ar71xx: ag71xx: fix MAC address setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-09 18:05:36 +00:00
juhosg
e9152bd9e4 ar71xx: add NAND driver for the RB750 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-08 12:10:23 +00:00