qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-15 00:22:48 +02:00
Code
23,496 Commits 13 Branches 0 Tags 117 MiB
9f54f3752f
Commit Graph

23496 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
juhosg
8930617368 ar71xx: fix image signature for UBNT-XM boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-18 14:45:52 +00:00
nbd
0a4428a71b ath5k: do not re-run AGC calibration periodically - fixes stability issues on AR2315 (#10574) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 22:15:33 +00:00
nbd
cb64c407c7 ath5k: do not stop the hardware queues during PAPD calibration, speeds up calibration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30623 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 22:15:26 +00:00
juhosg
a03baaa96f generic/2.6.37: fix 'set but unused' build errors on MIPS 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 17:21:03 +00:00
nbd
572b0cb4a3 gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30614 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 16:55:08 +00:00
nbd
663ce9a3a6 gcc: enable --with-headers for the final toolchain build 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30613 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 16:55:01 +00:00
nbd
5dcd40ec7e crda: remove unnecessary build dependency on mac80211 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30612 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 15:54:57 +00:00
nbd
8ee49b5963 hostapd: remove unnecessary dependency on mac80211 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30611 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 15:54:53 +00:00
jow
7adfa6c810 [package] broadcom-diag: add missing brackets breakign the detection logic (#10836) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30610 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 09:04:23 +00:00
jow
e01799a285 [package] iwinfo: implement proper hardware detection for ar23xx SoC devices like the NanoStation 2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-17 00:36:25 +00:00
juhosg
c2da468a0c ramips: extract eeprom for the built-in wlan module on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 20:06:22 +00:00
juhosg
37f21ebf4d ramips: rt3883: change eeprom file name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 20:06:21 +00:00
florian
8b4aee843b [scripts] env: colorize git output 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30602 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 19:24:34 +00:00
jow
694a09285d [package] iwinfo: fix detection of Bullet M5, the PCI ID was wrong 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30591 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:58:33 +00:00
acinonyx
7d27a0b34d [x86] Disable by default padding of images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:54:07 +00:00
acinonyx
4916a0ea0e [x86] Allow gzipping of squashfs images with padded jffs2 partition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:54:04 +00:00
acinonyx
05c64b9247 [x86] GZip only ext4 and padded images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:54:01 +00:00
acinonyx
8176b71781 [x86] Make gzipping of images configurable via menuconfig 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:53:57 +00:00
juhosg
0853b66205 package/mac80211: fix a possible NULL pointer dereference in rt2x00 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30586 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 17:14:34 +00:00
juhosg
a0ef5265a1 ar71xx: remove duplicated define from the D-Link profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 09:03:27 +00:00
juhosg
50f7b22bd7 ramips: select HW_HAS_PCI on per-board basis 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:54 +00:00
juhosg
9e8e8b51d6 ramips: rt3883: remove a stray character from rt3883.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:53 +00:00
juhosg
d81767c119 ramips: rt288x: don't register the PCI controller on each board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:52 +00:00
juhosg
013dc5a5d6 ramips: raeth: separate ring allocation and setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:50 +00:00
juhosg
5279a11d68 generic: add SND_PPC symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:51:44 +00:00
cshore
10724eda20 [ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:45:28 +00:00
cshore
5e4fce2233 [ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:38:33 +00:00
cshore
d24315ad26 [ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:29:26 +00:00
cshore
1a609bdce0 [ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 07:24:45 +00:00
jow
6a43915f2b linux 3.2: missing generic symbols 
These symbols are dependent on CONFIG_PCI being enabled.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 23:37:47 +00:00
jow
12750dc9c5 [package] kernel: fix KCONFIG depends of kmod-md modules 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30564 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 23:34:24 +00:00
juhosg
6660855cb6 ramips: rt288x: fix PCI resource conflict 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:19:02 +00:00
florian
5ad3941a70 [ramips] correct PCI IO/Mem resource swapping 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:13:21 +00:00
florian
62c0190fa5 [ramips] add Ralink V11ST-FE board support 
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:13:11 +00:00
nbd
f9e32614b0 build: add -Wno-error=unused-but-set-variable to cflags for gcc 4.6 and newer to avoid stupid -Werror related package breakage 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 19:19:12 +00:00
juhosg
43d6f57e67 ramips: raeth: add a helper function for skb allocation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:42 +00:00
juhosg
c99c1bd913 ramips: raeth: use netdev_alloc_skb 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:41 +00:00
juhosg
0564ef75aa ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures 
This helps GCC to generare more efficient code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:40 +00:00
juhosg
eaae1ec1de ramips: raeth: use 're' instead of 'priv' everywhere 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:38 +00:00
nbd
4eade74716 ath9k: prevent writes to const data on AR9160 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30551 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:02:57 +00:00
juhosg
d0794e0d35 ramips: raeth: force link down in ramips_phy_stop 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 13:47:52 +00:00
juhosg
815334db9c ramips: raeth: serialize ramips_link_adjust calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 13:47:50 +00:00
juhosg
d214321c8c ramips: raeth: add PHYLIB support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 06:47:12 +00:00
florian
f166258123 [package] gdb: use an updated 6.8a tarball 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 20:13:28 +00:00
blogic
810da4055a [kernel] add missing autoload shortcut to crypto modules for btrfs 
Currently the btrfs module (and other fs modules) is loaded before other modules to provide early extroot compatibility. This will fail for btrfs however, because the dependencies crypto-core and crypto-hash are missing. This patch makes them available for early loading too.

Signed-off-by: Jan Willies <jan@willies.info>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 20:11:28 +00:00
blogic
ca06b03a8e linux-atm: update solos-pci driver to upstream 
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 20:11:24 +00:00
blogic
12ee6100a2 linux-atm: headroom/padding fixes 
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 20:11:22 +00:00
blogic
3412b9496c mac80211: Allow preamble configuration 
Add a new wireless config parameter short_preamble=0|1 to enable
usage of short preambles. Default is to only allow long preambles
as before.

Even if short_preamble is set to 1 hostapd will take care that
short preambles are disabled as soon as a STA associates that
cannot handle short preambles.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:15 +00:00
blogic
d25d480741 Add kernel module package for SLIP 
This patch adds support for a kernel module package for SLIP. We needed it forusing tunslip6 from Contiki OS for 6LoWPAN communications.

Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:13 +00:00
blogic
6aa1eddee7 [lantiq] generate uboot environment data in target 
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 19:07:11 +00:00