qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-20 12:24:03 +02:00
Code
24,921 Commits 13 Branches 0 Tags 117 MiB
a47b8e3270
Commit Graph

24921 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
florian
aa4d6d46de [mcs814x] nuport-mac: rework PHY interrupt configuration to avoid races 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:51:18 +00:00
florian
1536e98836 [mcs814x] nuport-mac: close possible race condition during start 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:51:13 +00:00
florian
fe5c16eebf [mcs814x] nuport-mac: unmap the DMA buffer when closing device 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:51:09 +00:00
florian
403b1f1906 [mcs814x] nuport-mac: check dma_map_single address return values 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33067 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:51:04 +00:00
florian
d1e20e7b57 [mcs814x] build a Devolo dLAN USB Extender specific image 
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33066 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:51:00 +00:00
florian
df804c6333 [mcs814x] cleanup image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 21:50:55 +00:00
nbd
a7f0882084 ath9k: fix handling of decryption errors, should improve link stability 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33063 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 18:23:04 +00:00
nbd
3a60b01ad2 ath5k: revert a buggy tx power related patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33062 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 18:23:00 +00:00
florian
b8b2f7b02f [package] base-files: check for ldd presence and executability (#11991) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33057 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 15:37:34 +00:00
nbd
2f7a03019c ath9k: fix hang issues on hw reset caused by interrupt storms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 12:56:44 +00:00
blogic
f2f3bfda50 [lantiq] pci gpio mapping 
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33054 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 12:14:43 +00:00
jow
afdf66161f [package] hostapd: fix ap/sta regression which got accidentally introduced by r32829 (#11914) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-08 11:13:12 +00:00
florian
bc327ce0d1 [package] busybox: support V=c toplevel verboseness flag (#11799) 
Signed-off-by: Gregory M. Turner <gmt@malth.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-07 16:08:11 +00:00
florian
ecd6448e18 [package] w1-gpio-custom: set enable_external_pullup to null (#8952) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-07 16:08:08 +00:00
nbd
9b37c00d7b ath9k: completely disable the MIB interrupt from the interrupt mask register to prevent potential interrupt storms 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33032 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-07 09:36:24 +00:00
nbd
b860f4a0da ath9k: extend and enable PA predistortion 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33031 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-06 22:11:30 +00:00
nbd
ba611b292b mac80211: do not delete linux/*_platform.h, they are touched by patches. instead make the build fail if they differ from the ones in the kernel tree to prevent subtle runtime issues (see #11981) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33030 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-06 20:18:07 +00:00
blogic
3b62de75ae [lantiq] fixes tapi dependencies 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33029 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-06 18:56:38 +00:00
blogic
6443da06c2 [e2fsprogs] fixes package description 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33028 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-06 18:54:36 +00:00
nbd
d87203afbf ath5k: add various pending tx power fixes, vastly improves stability and performance with various cards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33014 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-06 15:33:24 +00:00
hauke
e239ce6719 [packages] mac80211: remove header files used to share struct with platform code. 
The structs defined in these header files should be the same as the 
structes used by the platform code otherwise it will cause strange 
runtime errors. By removing them from compat-wireless we will get a 
compile error instead of a runtime error if they are out of sync.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 23:43:36 +00:00
jogo
28b3f06aa6 bcm63xx: fix USB base registers and IRQs for BCM6328 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33005 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 23:18:22 +00:00
hauke
8e1718f8e2 [brcm47xx] update tg3 driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 20:27:40 +00:00
hauke
7e86c89269 [brcm47xx] generate image for Linksys e3200 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 13:14:00 +00:00
hauke
b1de47f245 [packages] switch: clean up robo switch driver 
* remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33002 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 13:10:43 +00:00
hauke
302fdbb0b8 brcm47xx: update gpio patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 12:40:05 +00:00
hauke
b8881f1e23 brcm47xx: fix patch which moves the flash struct in wgt634u code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 12:39:15 +00:00
blogic
1378bc01d2 [kernel] fix xen pci module, partially fixes #11970 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-05 08:16:50 +00:00
blogic
2f6abff72c [lantiq] W502V/ARV4525 wireless mac bugfix 
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-04 20:14:52 +00:00
hauke
1d6c42df96 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-04 19:46:25 +00:00
blogic
039f179551 [kernel] gspca-sn9c20x.ko was not insmod'ed due to typo 
fixes #11973

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32991 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-04 19:17:49 +00:00
blogic
ae154c227f [atheros] wrt55agv2-spidevs needs <linux/modules.h> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-03 09:38:24 +00:00
blogic
cea2b4210d [lantiq] cleanup patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32953 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-03 08:53:02 +00:00
florian
6b899d5dea [mcs814x] nuport-mac: properly protect the phy interrupt handler 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 18:13:17 +00:00
blogic
ab27b3f74d [bufferbloat] Codel: avoid a nul rec_inv_sqrt 
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 13:39:50 +00:00
blogic
e38a6c3f37 [lantiq] fixes i2c clock enable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32949 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 13:29:49 +00:00
juhosg
1c54e0a078 ar71xx: simplify misc IRQ handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32948 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 11:25:49 +00:00
juhosg
93af4ef46f ar71xx: fix AR934X_EHCI_SIZE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32947 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 11:25:46 +00:00
juhosg
7750261206 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32946 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:41 +00:00
juhosg
70b3c1262b ar71xx: image: allow to use board specific code in the lzma-loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32945 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:33 +00:00
juhosg
58aa6ee58f ar71xx: init switch hw_reset on the TL-WR1043ND board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32944 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:28 +00:00
juhosg
08700f9817 generic: rtl836x: add hw_reset field to struct rtl8366_smi 
It will be used to start/stop the switch if that is
supported by the given board.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32943 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:21 +00:00
juhosg
7f000ed40c generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32942 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-02 09:54:13 +00:00
florian
0a53c615c8 [mcs814x] add missing netmask to the network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32941 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 22:09:13 +00:00
florian
de000e9b36 [mcs814x] assume the link is up and full-duplex by default 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32940 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 21:56:54 +00:00
florian
9a9ced9072 [mcs814x] add a default and suitable network config file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32939 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 21:56:49 +00:00
juhosg
62dfbdafd5 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:57 +00:00
juhosg
1701067509 ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:56 +00:00
juhosg
48872cf839 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32932 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:54 +00:00
juhosg
b80a2c45e4 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-01 12:24:52 +00:00