qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 09:54:05 +02:00
Code
24,385 Commits 13 Branches 0 Tags 117 MiB
b079ac667f
Commit Graph

9567 Commits

Author SHA1 Message Date
florian
b079ac667f [realview] disable VFPv4 probing 
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:56 +00:00
florian
d68d56b155 [realview] partially revert r33403 
The target CFLAGS were also accidentally changed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:46 +00:00
juhosg
a384f7bf1b ar71xx: register the NAND flash controller device on DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:57 +00:00
juhosg
88d42e3e5a ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:55 +00:00
juhosg
52f5b88b84 ar71xx: ar934x_nfc: increase DMA retry count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:54 +00:00
juhosg
5c9038f12e ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:53 +00:00
juhosg
56caae5b72 ar71xx: ar934x_nfc: fix RNDOUT operation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:51 +00:00
juhosg
5cf642fa6f ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:50 +00:00
cshore
4e7d8aa302 [ar71xx] dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 14:17:12 +00:00
nbd
6cd281447f ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 11:17:29 +00:00
nbd
9d164b87ca ar71xx: fix WP543 image builds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 10:21:21 +00:00
blogic
8d4ebc34f0 D-Link DAP-1350; Avoid bricking esw config 
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 09:28:28 +00:00
blogic
d41175cdb1 ramips/rt3883: fix a typo in the ASUS profile 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-15 09:20:50 +00:00
florian
f85f3848d7 [realview] partially revert r33403 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:44:25 +00:00
florian
933cabf6c9 [leon] set DEVICE_TYPE to developerboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:51 +00:00
florian
d15b926afd [leon] fix sparc32 assembler failures with newer toolchains 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:40 +00:00
florian
d88f9818d8 [leon] refresh patches so they apply cleanly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:37:12 +00:00
florian
e2f7aae0b9 [realview] set DEVICE_TYPE to developperboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:36:33 +00:00
florian
79df2ee02b [malta] set DEVICE_TYPE to developperboard 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-14 15:36:30 +00:00
juhosg
f74bd75daa ar71xx: merge machine support patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33389 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:28 +00:00
juhosg
e9a522de9e ar71xx: register the NAND controller device on the RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:26 +00:00
juhosg
39bdbbc7fc ar71xx: add device registration code for the AR934x NAND flash controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:25 +00:00
juhosg
8788b410ee ar71xx: package the AR934x NAND driver module 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33386 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:23 +00:00
juhosg
ce47c98d07 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:22 +00:00
juhosg
9edd5a0ba0 generic: add MTD_NAND_AR934X symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33384 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:21 +00:00
juhosg
93a698140f generic: move GENERIC_PWM symbol into the generic config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 06:38:31 +00:00
juhosg
e96ea88268 ar71xx: define NAND controller base address and register size for AR934X/QCA955x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-12 19:06:38 +00:00
juhosg
de071d14f7 ramips/rt305x: add initial support for Rt5350 SoC 
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33381 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-12 19:03:12 +00:00
hauke
c96bed78c2 [brcm47xx]: add gpio sysfs entries 
This fixes #10256


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33369 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-11 15:04:20 +00:00
juhosg
29f447b9fd ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 14:38:01 +00:00
juhosg
e1ee097247 ar71xx: fix QCA955X_EHCI_SIZE 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 14:32:54 +00:00
florian
405e94ce42 [generic] fix ixp4xx_hss build failure (#12162) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-10 08:53:21 +00:00
jow
20856122c5 [ar71xx] fix description of nand/Ath5k profile (#12149) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33352 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 21:40:26 +00:00
juhosg
4b7be33ba5 ar71xx: add initial support for RB2011UAS-2HnD 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:32 +00:00
juhosg
25dbd4639c ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:30 +00:00
juhosg
d0d14675bb ar71xx: add RouterBoot related helper routines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:28 +00:00
juhosg
2622bc18da generic add WLAN calibration data ID to routerboot.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33346 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:26 +00:00
juhosg
4834938a89 ar71xx: define MTD partitions for RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:24 +00:00
juhosg
775e69dfac ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:22 +00:00
juhosg
527f8049cd ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:20 +00:00
juhosg
c4b6e540e4 ar71xx: add dynamic MDIO clock calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:17 +00:00
juhosg
38ca354ccc adm5120: move common routerboot definitions into a separate header file 
Those will be used on the ar71xx platform as well.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33341 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 11:55:42 +00:00
jogo
5e5c7d5aa1 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi 
Fixes booting the device with button hotplug enabled (#10785).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 11:54:56 +00:00
juhosg
3868d762d1 ar71xx: use the RLE library for RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 17:51:56 +00:00
juhosg
6142d590e3 ar71xx: add library code for RLE decoding 
It will be used for the MikroTik boards.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 17:51:54 +00:00
juhosg
41be3a0bd3 ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 13:39:09 +00:00
juhosg
6f0a45267a ar71xx: refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 13:39:04 +00:00
florian
08b17128a1 [mcs814x] use the recommended ARM I/O accessors 
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 09:51:05 +00:00
cshore
60244743f9 [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-06 18:15:26 +00:00
luka
507c46269b lantiq: fix sx76x default uci network configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-06 00:09:46 +00:00