qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 07:03:21 +02:00
Code
23,582 Commits 13 Branches 0 Tags 117 MiB
b899b1d3a5
Commit Graph

9192 Commits

Author SHA1 Message Date
nbd
b899b1d3a5 kernel: add a few more tracing related symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 18:04:00 +00:00
nbd
eed1fe974e ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:12 +00:00
nbd
62977660d8 ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:09 +00:00
nbd
7ea20fba6a ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 17:24:01 +00:00
florian
d19ba29311 [brcm63xx] fix alarm led color for board 96348A-122 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 16:07:46 +00:00
florian
0e5685072e [brcm63xx] add 96348w3 board (#10764) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:45:04 +00:00
florian
84fcf0bb00 [brcm63xx] update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:56 +00:00
florian
adfadea95e [brcm63xx] fix leds naming for all bcm63xx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:44:52 +00:00
nbd
32b9ee0930 kernel: make tracing support configurable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 15:25:57 +00:00
florian
3d0fed711e [brcm63xx] backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:33 +00:00
florian
28f01f0d91 [generic/3.3] backport spi message queue infrastructure 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:30 +00:00
florian
a7a19483fb [brcm63xx] increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-06 13:31:24 +00:00
blogic
9216dfc76c [lantiq] clean up generic image building 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 17:49:42 +00:00
florian
6255930f93 [brcm63xx] fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:41 +00:00
florian
c7d60bd0db [kernel/3.3] refresh generic patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:38 +00:00
florian
a6691cb6b1 [brcm63xx] fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 13:40:35 +00:00
blogic
466d98bf88 [kernel] bump to 3.3.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 06:57:51 +00:00
luka
576ea25936 kirkwood: reorganize target 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-05 00:43:56 +00:00
luka
090fe17a5f uboot-envtools: update to 2012.04.01 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 21:55:49 +00:00
jogo
43bdeca579 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-04 08:35:25 +00:00
blogic
35d604e713 [lantiq] adds unset Kbuild symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 14:03:32 +00:00
juhosg
f6bfa9b749 malta: remove 3.2 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:28 +00:00
juhosg
8f3ef842f5 malta: use common kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:26 +00:00
juhosg
e17a638412 xburst: add missing config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-06-02 12:06:15 +00:00
blogic
b9f376d33a [kernel] adds patch to make Tantos (psb6970) switch buildable again 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 17:41:28 +00:00
jogo
f91824b22d bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:46 +00:00
jogo
99b853b6b3 bcm63xx: readd accidentially dropped network config for SPW303V 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-30 10:27:42 +00:00
juhosg
7cab23d0dc generic: ar8216: add revision specific PHY fixups for AR8327 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:27 +00:00
juhosg
72df0a7c48 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:26 +00:00
juhosg
6d10d89b29 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:24 +00:00
juhosg
3ffc68003f ar71xx: add default LED setup for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:23 +00:00
juhosg
ab5576542a cns21xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:22 +00:00
juhosg
014e1ffa51 lantiq: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:21 +00:00
juhosg
09f48c381b kirkwood: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:20 +00:00
juhosg
93945c8815 ramips: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:18 +00:00
juhosg
22ae6b82eb ar71xx: use the generic uci-default functions for initial LED setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 20:39:50 +00:00
nbd
0f299fab07 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-28 02:55:59 +00:00
nbd
dfea949949 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:41 +00:00
nbd
295c63c334 kernel: fix suppressing -s for linking modules when profiling is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c ar71xx: fix TL-WR1041 image size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0 ramips: rt3883: add device registration code for the SPI controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:10:00 +00:00
juhosg
84b342399c ramips: allow to use the SPI driver on RT3662/RT3883 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa ramips: rt3883: fix GPIO reservation for the SPI pins 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb ramips: rt305x: remove superfluous controller_data assignment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9 ramips: make rt2x00 firmware extraction quiet 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:50 +00:00
juhosg
39068e8b25 generic: rtl8367: rename a misnamed variable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6 generic: rtl8366_smi: remove duplicated spinlock initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-27 17:09:45 +00:00