qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-20 20:16:16 +02:00
Code
20,480 Commits 13 Branches 0 Tags 117 MiB
c2fec0edf0
Commit Graph

7798 Commits

Author SHA1 Message Date
florian
4b5057ec0f bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:50 +00:00
florian
65b306d01e bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26875 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:45 +00:00
florian
a49f5b3910 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:41 +00:00
florian
fcef96a488 [ep93xx] switch to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26873 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:34 +00:00
florian
21f2f27579 [kernel] add missing 2.6.38 touchscreen config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26872 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-11 13:33:30 +00:00
blogic
10f03e0475 [PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC 
This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-09 15:21:58 +00:00
juhosg
b500b67652 ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:51 +00:00
juhosg
b3a8c8a5ce ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:49 +00:00
juhosg
a1c5a3da98 ar71xx: use phy0tpt trigger for the WLAN LEDs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:48 +00:00
juhosg
5b6a159d03 ar71xx: remove superfluous fifo_cfg overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 21:38:46 +00:00
thepeople
318f8f9eeb [PATCH] ipv6: restore correct ECN handling on TCP xmit 
Thanks Dave Taht

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26858 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 17:08:06 +00:00
juhosg
bb14a2f07c ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26856 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 16:32:53 +00:00
juhosg
0511a7adf1 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26855 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:36 +00:00
juhosg
14088891b0 ar71xx: ag71xx: fix build error if debugfs is enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-08 13:30:26 +00:00
hauke
26205d18e8 brcm47xx: update patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:49:17 +00:00
juhosg
e5061b1935 ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:34 +00:00
juhosg
5155342ee7 ar71xx: ag71xx: add timestamps to ag71xx_buf 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:28 +00:00
juhosg
5e10b16d95 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:26 +00:00
juhosg
f6816e49d9 ar71xx: ag71xx: use debugfs_remove_recursive 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 12:40:25 +00:00
juhosg
193e04ebee ar71xx: override wmac device name for the AR934x SoCs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-07 09:23:32 +00:00
florian
663cf912af [ar7] remove useless patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-06 12:37:40 +00:00
florian
9db1daeb99 [kernel] fill maintainer infos for a couple of targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-06 12:37:36 +00:00
florian
2a36c4c1d0 [malta] update to 2.6.38.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26833 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 16:35:44 +00:00
florian
fd174f110c [kernel] add missing 2.6.38 symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26832 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 16:35:40 +00:00
hauke
a921520508 brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26829 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 14:05:21 +00:00
hauke
6a2f5043e3 brcm47xx: fix typo in patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 13:18:35 +00:00
acoul
348cbe4bd3 linux/ar71xx: add some missing symbols for nand/yaffs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26827 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-05 07:19:46 +00:00
acoul
65c914d861 linux/generic: port yaffs to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-04 09:35:06 +00:00
acoul
55090a4f27 linux/rb532: use kernel and initramfs tags on image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-04 08:47:00 +00:00
jow
15f719295e [PATCH] geos: remove unneeded modules 
The via-sata and gpio-nsc modules are both unneeded on the Geos platform.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-03 21:18:12 +00:00
florian
4c6cfc925c [uml] update to 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-02 07:57:25 +00:00
nbd
cbc75e81c2 cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-02 00:28:30 +00:00
hauke
374bb82f67 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an 
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-01 20:28:35 +00:00
nbd
f7215e23eb cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26797 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-01 15:53:56 +00:00
nbd
118a9c5154 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26779 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:42 +00:00
nbd
dc218ac48d ar8316: automatically detect whether port4 is used as PHY or as a switch port 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26778 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 21:27:37 +00:00
nbd
8220523bad ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26777 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 19:30:49 +00:00
nbd
bfce59f539 ar8216: support AR8316 rev 0 devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26776 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-28 19:30:43 +00:00
acoul
98a395304f linux/atheros: add 2.6.38 preliminary support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26772 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-27 17:18:03 +00:00
nbd
43ac860de1 swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK 
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26770 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-26 23:05:29 +00:00
acoul
15b4a061a0 linux/adm5120: update wget2nand script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26748 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 13:18:33 +00:00
acoul
b7a26a735b linux/ar71xx: update wget2nand script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26747 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 12:38:25 +00:00
acoul
dfba2f5fb1 linux/ar71xx: add 2.6.38 preliminary support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26746 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-21 11:45:23 +00:00
nbd
08b7e3152b uml: fix the kernel config name override 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26715 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 21:47:49 +00:00
nbd
5530235576 x86: remove 2.6.35 patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:50 +00:00
nbd
76383a0da0 brcm63xx: remove patches/configs for 2.6.35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:46 +00:00
nbd
e8290adf62 au1000: remove patches/configs for 2.6.35 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:42 +00:00
nbd
e2329f34d0 ar7: remove patches/configs for old kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26707 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:38 +00:00
nbd
fb9db09832 adm5120: remove patches/configs for unused kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:39:32 +00:00
nbd
8b102012a0 rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs. 
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.

Signed-off-by: Jochen Friedrich <jochen@scram.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-17 18:32:28 +00:00