To prevent code duplication for clearing QoS firewall rules, support
"firewall stop" arguments to generate.sh to generate the necessary
script commands. Make use of this from qos-stop.
Signed-off-by: Kevin Locke <klocke@digitalenginesoftware.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28623 3c298f89-4303-0410-b956-a3cf2f4a3e73
Prefix the names of the iptables chains used for QoS with "qos_" to
allow for identification of QoS chains for removal across configuration
changes. When clearing QoS iptables chains, only remove chains with the
namespace prefix in order to preserve user and/or other package chains
in the mangle table.
Signed-off-by: Kevin Locke <klocke@digitalenginesoftware.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28622 3c298f89-4303-0410-b956-a3cf2f4a3e73
Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk.
Also make code more readable by escaping that overly long line.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28616 3c298f89-4303-0410-b956-a3cf2f4a3e73
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
The rdate applet proved to be too unreliable to obtain the current time on boot:
- public time servers are rare and often unreachable or overloaded
- rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions
- the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations
- the time protocol as specified in RFC 868 is considered obsolete
This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly.
The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or
by clearing the timeserver list in /etc/config/system.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fix a typo that caused packaging of an empty ./lib/upgrade/keep.d
directory when the package supplied conffiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28595 3c298f89-4303-0410-b956-a3cf2f4a3e73
Compiling zlib produces zlib.pc (pkgconfig), but it is not currently
installed in staging_dir/usr/lib/pkgconfig. If it was included other
packages depending on zlib could easier be compiled.
Signed-off-by: Espen Jürgensen <espenjurgensen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28591 3c298f89-4303-0410-b956-a3cf2f4a3e73
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28570 3c298f89-4303-0410-b956-a3cf2f4a3e73
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.
Known problem: iw phy phy0 info shows:
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
This updates uboot-envtools to the version which comes with U-Boot 2011.06.
The important novelity is that fw_setenv now supports batch processing, which
greatly improves sysupgrade of the ALL0258N as otherwise we would have to
overwrite uboot-env up to 8x in a single firmware upgrade.
Unfortunately, no newer version of the sources is available from Debian, so we
got to take it from the u-boot source which is kinda ugly...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28566 3c298f89-4303-0410-b956-a3cf2f4a3e73
