qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-12 20:45:55 +02:00
Code
20,882 Commits 13 Branches 0 Tags 117 MiB
d92e2b4207
Commit Graph

7720 Commits

Author SHA1 Message Date
juhosg
e70980e097 ar71xx: remove 2.6.37 support as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27313 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:36 +00:00
juhosg
d9b5b92778 ar71xx: remove 2.6.38 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27312 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:34 +00:00
juhosg
1c570d4d17 ar71xx: switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27311 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:33 +00:00
juhosg
da1bd2aad6 ar71xx: add 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:32 +00:00
juhosg
48cf86296e ar71xx: remove ar71xx_gpio_irq_set_type 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27309 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:30 +00:00
juhosg
47d06a3f16 ar71xx: add separate handlers for IP3 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27308 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:29 +00:00
juhosg
32852643ef ar71xx: use separate handlers for IP2 interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27307 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:28 +00:00
juhosg
62be67eb01 ar71xx: remove useless irq_desc.status initializations 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27306 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:27 +00:00
juhosg
f9ffd498e1 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27305 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-29 08:57:25 +00:00
hauke
ff1834fac5 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27302 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:23:21 +00:00
hauke
6c4398bc6a brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27301 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 22:21:57 +00:00
hauke
a89d3f1a9b kernel: refresh patches for kernel 3.0-rc5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27300 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 20:25:39 +00:00
hauke
6936562161 kernel: update ssb and bcma to linux-next next-20110628 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27299 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:33:50 +00:00
hauke
e2e4e12a9a kernel: update kernel to 2.6.39.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27298 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 19:30:58 +00:00
kaloz
62588ba2fa [cns3xxx]: ethernet cleanup and sata fix - thanks, Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27297 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-28 06:54:20 +00:00
hauke
d44b8ff5e3 brcm47xx: update kernel to version 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27296 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:29:20 +00:00
hauke
7072b1e240 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27295 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 21:28:40 +00:00
hauke
951d6d8330 brcm47xx: fix Linux-3.0 and fix clock rate detection. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27294 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:20:11 +00:00
hauke
85dd88a3c6 kernel: update ssb and bcma to linux-next next-20110627 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27293 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 20:18:49 +00:00
jow
697cd0b667 [geos] remove remaining uci-defaults 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27291 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-27 01:42:31 +00:00
florian
42b043fcf4 [x86] geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27287 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:10 +00:00
florian
8138343d87 [x86] alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27286 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 22:05:05 +00:00
florian
4fa8e1979c [brcm63xx] remove gpiodev, prefer sysfs gpio 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27284 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 19:26:17 +00:00
nbd
e00ba06f78 ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27283 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:54:42 +00:00
nbd
40ad0e2ed9 ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27282 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-25 13:48:47 +00:00
florian
f0aa035693 [kernel] add missing linux-3.0 config symbol 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-24 11:43:30 +00:00
florian
cf43489095 [brcm63xx] register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27258 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-22 12:32:03 +00:00
florian
80db4b51be [brcm63xx] fix tab damage in 141-led_count.patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27254 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:58 +00:00
florian
07d9a1e199 [kernel] fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27253 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 20:52:53 +00:00
hauke
b40c3fc29b kernel: refresh patches for kernel 3.0-rc4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27247 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 18:39:47 +00:00
florian
7954e2cc55 [brcm63xx] use macros to generate SPI registers table and switches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27246 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-21 10:05:51 +00:00
florian
d60ce1b40f [adm5120] fix usb mis-cleanup after r27162 (#9581) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-20 10:04:53 +00:00
jow
673103854c [x86] Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27241 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 23:05:21 +00:00
jow
7733d536b3 [PATCH] generic: Remove IPv6 depependency of bridge in 2.6.38+ 
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is
enabled. Since the IPv6 module isn't exactly lightweight and bridge also
only needs a single function from IPv6, it's rather easy to create a
common "lib" module with a RCU pointer to the actual implementation, if
the IPv6 module is loaded (although slightly hackish).

The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 22:48:53 +00:00
florian
e13c1d256f [brcm63xx] dev-spi.c checks for running CPU, not board code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27236 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:46:00 +00:00
florian
be166690fa [brcm63xx] fixup patches after r27234 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27235 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:28:38 +00:00
florian
64c718f223 [brcm63xx] remove accidental bcm6345 related patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27234 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:16:59 +00:00
florian
ea57f00705 [brcm63xx] remove support for 2.6.37 and 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27233 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:14:22 +00:00
florian
df49c5b247 [brcm63xx] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27232 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:12:45 +00:00
florian
2303389688 [cobalt] remove 2.6.35 and 2.6.32 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:40 +00:00
florian
900fe1bcc1 [ep93xx] remove pre 2.6.39 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:09:00 +00:00
florian
811d545260 [au1000] remove 2.6.37 patches and config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27228 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 20:07:26 +00:00
juhosg
8738d0666a ar71xx: cleanup AR933X UART driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:51 +00:00
juhosg
4a96046040 ar71xx: fix uart clock frequency for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27221 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-19 13:17:50 +00:00
hauke
e8526fc8bf brcm47xx: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27219 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:53:14 +00:00
hauke
2c1ed14849 kernel: update to kernel 2.6.38.8 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27218 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:52:15 +00:00
hauke
86a107e544 brcm47xx: add support for kernel 3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27217 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-18 15:24:44 +00:00
rwhitby
90632ae8aa ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27202 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-17 11:22:22 +00:00
florian
d440b026f6 [kernel] add missing USBIP_CORE item in config-3.0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27195 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:50 +00:00
florian
632a38eb50 [malta] allow any console to be used 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:44 +00:00
florian
bba43a8dab bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27192 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-16 14:34:40 +00:00
hauke
ed6be451a0 linux/generic: Add support for 3.0-rc3 
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27191 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:31:01 +00:00
hauke
5d3c534673 bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 21:11:49 +00:00
jow
886975b7e5 [PATCH] 2.6.39.1: missing kernel symbols 
If you turn on I2C, you'll need this symbol defined.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:18:32 +00:00
nbd
9ec7437e17 add missing kernel config symbols for usb on powerpc 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 18:07:26 +00:00
jow
0d5a874445 [generic] backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 14:11:33 +00:00
jow
fb3339fc0d [generic] revert r26997, it does not apply against 2.6.36.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-15 13:51:57 +00:00
florian
72829489da [cobalt] switch to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:13 +00:00
florian
d78f71b371 [cobalt] fix diag.sh with qube2 front led 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:09 +00:00
florian
6f5d1f2104 [cobalt] resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-14 20:05:03 +00:00
blogic
00cb032d3c [lantiq] 
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 22:37:23 +00:00
florian
d7f70f01a8 [uml] replace unfortify patch with a better one 
Thanks to Richard Weinberger for providing this patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 12:45:12 +00:00
juhosg
63dccaf23b ar71xx: use ar933x_uart.h in the AR933X serial driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27166 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:40 +00:00
juhosg
83e2548ec8 ar71xx: update early_printk code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-13 08:12:38 +00:00
florian
27e94101de [adm5120] cleanup files using checkpatch.pl 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27162 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 19:17:57 +00:00
blogic
5151e90913 [lantiq] 
* move patches around
* add basic support for gigaset sx76x


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-12 08:56:26 +00:00
acinonyx
3f2561bdea [ar71xx] Remove trailing spaces, convert spaces to tabs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27153 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 19:30:50 +00:00
blogic
eb72b14048 [ledtrig-netdev] 
we dont need 1024 bytes buffer. 128  bytes is enough.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27143 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 07:08:54 +00:00
blogic
a9c1e1b2b5 [atheros] 
* revert accidental config change


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27142 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-09 05:10:18 +00:00
blogic
0814097081 [lantiq] 
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-08 17:57:55 +00:00
nbd
a6c1bd4558 ar71xx: override inittab to enable login on ttyATH0 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27128 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-07 17:07:10 +00:00
florian
b5a33bb5d5 [ep93xx] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27114 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:14 +00:00
florian
29ba1eadaa [ep93xx] define UIMAGE for various rootfs targets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27113 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:09 +00:00
florian
44bc580553 [ep93xx] use IMG_PREFIX for image name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27112 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:04 +00:00
florian
81dcbabe94 [kernel] add more config symbols to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27111 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:27:00 +00:00
florian
16a2625fed [uml] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27110 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 18:26:54 +00:00
florian
4680c9125b [realview] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27107 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:09 +00:00
florian
ca71440af1 [malta] update to 2.6.39.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:05 +00:00
florian
51e57076af [kernel] add some missing 2.6.39 config symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27105 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:36:00 +00:00
florian
e056550af0 [kernel] update to 2.6.39.1 
patch from Peter Wagner

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27104 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 13:35:55 +00:00
juhosg
377e161817 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27102 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:10 +00:00
juhosg
7d535a19ed ar71xx: select the internal antenna by default on the ZCN-1523H boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-04 12:30:09 +00:00
florian
4fb824733a [au1000] update to 2.6.39 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27090 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-02 13:45:20 +00:00
nbd
480dfda6ec Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27088 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 18:15:43 +00:00
juhosg
3db28f9561 ar71xx: init external_reset for AR933X 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:30 +00:00
juhosg
1bab920361 ar71xx: add external_reset field to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27082 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:28 +00:00
juhosg
037092a862 ar71xx: init get_mac_revision on AR9330 rev 1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27081 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:27 +00:00
juhosg
03659f9521 ar71xx: add get_mac_revision to ath9k_platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:26 +00:00
juhosg
9657aff1ae ar71xx: export SoC revision 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27079 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 13:12:24 +00:00
kaloz
bd215a1b57 [cns3xxx]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27078 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 07:24:41 +00:00
kaloz
e054e9a416 [cns3xxx]: fixup second led, patch from Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27077 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 07:21:25 +00:00
nbd
1eeba399c6 ar71xx: add profile and image building code for wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:30 +00:00
nbd
50919ca9e2 ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:26 +00:00
nbd
dcab6b06b2 fix a crash in mtd_concat when the .sync op is not implemented 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27074 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:22 +00:00
nbd
66a8e8ec8d m25p80: add the chip id for the winbond w25q128 chip 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27073 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:18 +00:00
kaloz
279fea2717 [cns3xxx]: fixup pcie clock, thanks Chris 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27072 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 23:55:33 +00:00
juhosg
269c6430d7 ar71xx: build images for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:47 +00:00
juhosg
165010d573 ar71xx: add sysupgrade support for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27069 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:45 +00:00
juhosg
5d12cb1277 ar71xx: add default network config for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27068 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:44 +00:00
juhosg
92fa0b3f16 ar71xx: add support for the AP121/AP121-MINI reference boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27067 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:43 +00:00