qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 13:51:32 +02:00
Code
20,580 Commits 13 Branches 0 Tags 117 MiB
eaa759a8e5
Commit Graph

20580 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
juhosg
8de3a1a306 ar71xx: cleanup SoC detection code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:49 +00:00
juhosg
b9fe109d2b ar71xx: sync kernel configuration 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:45 +00:00
juhosg
db38ac7711 ar71xx: Fix mac address offset for AR934x 
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:47:42 +00:00
nbd
e7db78c341 atheros: merge a few patches into the right place 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:26:03 +00:00
nbd
77ce5a164c atheros: fix up empty radio data mac address (based on patch from #8601) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:25:59 +00:00
nbd
cf521fcca8 atheros: fix ath5k support on ar2315/2317 
- Use physical addresses definition for AR2315 the same way as AR5312. Fixes ioremap
- Fix dma mapping for AHB bus (only use the PCI DMA offset for PCI devices)

Based on patches by Wojciech Dubowik

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:25:55 +00:00
nbd
b613f2d631 atheros: enable CONFIG_IP17XX_PHY to add back switch support for the DIR-300 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 18:25:51 +00:00
hauke
1f7f8ddfd9 kernel: add missing config options 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 17:39:44 +00:00
hauke
bdb465749d kernel: add scsi cdrom support 
This closes #9125.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 15:59:03 +00:00
nbd
d2bb507b50 uClibc: forced unwind for pthread_cancel handling is broken and triggers spurious abort() calls from libgcc. disable it and use the other method instead 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 15:46:58 +00:00
nbd
0fb56fb478 ath9k: properly count retries when frames are filtered due to excessive retries when a client is not in powersave mode 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 15:22:01 +00:00
nbd
75c5ede9ee mac80211: fix reading the station flags in debugfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 15:21:57 +00:00
hauke
f1f16aa807 firmware-utils: fix endianness bugs in firmware generation program. 
Should make it work on big endian systems again, I do not have such a system.

This closes #9093.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26543 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 15:06:01 +00:00
hauke
4bfff023c5 linux-atm: package atm-diagnostics with atmdump, atmdiag, etc. 
If your ISP is pushing their own DSL equipment (which many do to contain support costs), they won't be
forthcoming with your various settings: encapsulation, VPI/VCI, etc.

These you might have to discover yourself.  The easiest way to do this is with atmdiag and atmdump.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-09 13:05:48 +00:00
nbd
268ceb4392 kernel: include firmware in the e100 package 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 21:53:38 +00:00
hauke
28304035b1 brcm47xx: add Netgear WNR834BV1 
Thank you realopty for the patch.

This closes #7702


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 19:22:09 +00:00
hauke
855a73d79a mac80211: add Intel wireless drivers. 
This adds the Intel wireless drivers for their normal cards.

Thank you framer99 for the patch, I extended it a little bit.

This closes #7227


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 16:17:21 +00:00
hauke
d35e62d01f brcm47xx: upgrade to kernel 2.6.27.6. 
This should be save now.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 15:12:08 +00:00
nbd
f53132ef54 ath9k: improve the rx dma stop fix, add more debugging output in case the issue still occurs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26532 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 12:18:43 +00:00
nbd
063b9eca01 mac80211: fix support for iftype wds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-08 01:04:44 +00:00
acinonyx
1ce317f201 [package] kernel/modules: Enable Realtek R8169 not only for x86 
This enables support for Realtek 8169 based network cards for other
platforms than x86. I have a mini-PCI card on ixp4xxx running here.
Maybe for the other cards in netdevices.mk a @DEPENDS change from
@TARGET_x86 to @PCI_SUPPORT makes also sense.

Signed-off-by: Christoph König <christoph.koenig@ikt.uni-hannover.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 23:31:56 +00:00
jow
14b8ad8acf [x86] Bump kernel version to 2.6.37.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 21:54:29 +00:00
hauke
82b04bebc1 brcm47xx: add initial support for kernel 2.6.38 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26524 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 21:38:41 +00:00
juhosg
b1f3482e70 ar71xx: add DB120 board specific PCI initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:41 +00:00
juhosg
004690a661 ar71xx: register WMAC device on the DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:37 +00:00
juhosg
ce9abcca4a ar71xx: add support for the built-in WMAC of the AR934x 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26521 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:34 +00:00
juhosg
005ecd4268 ar71xx: create a separate profile for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26520 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:25 +00:00
juhosg
930932005d ar71xx: build firmware image for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:23 +00:00
juhosg
e018221576 ar71xx: add initial support for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26518 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:19 +00:00
juhosg
475f894967 ar71xx: indicate AR934x support in menuconfig 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:14 +00:00
juhosg
7072aeaf32 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:10 +00:00
juhosg
b21a1fabc6 ar71xx: enable PCI for the AR934[24] SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:05 +00:00
juhosg
d6c448b131 ar71xx: enable USB support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:03 +00:00
juhosg
3167111b62 ar71xx: enable GPIO support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:00 +00:00
juhosg
7763501529 ar71xx: add AR934x specific glue for ar7100_device{start,stop} 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:57 +00:00
juhosg
2c08ed8f8b ar71xx: add AR934x specific UART clock initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:53 +00:00
juhosg
c5000fc993 ar71xx: add AR934x specific glue for IRQ initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:49 +00:00
juhosg
a5bba4d8fb ar71xx: add initial support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26509 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:52:45 +00:00
nbd
ce4be8a009 kernel: enable MPPE again, got broken in r26296 
Since r26296 mppe.ko could not be loaded, kernel gives "device missing" error.
According to KConfig cypther-ecb is required.

Signed-off-by: Sven Roederer <mailinglists.sven_at_roederer.dhs.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 19:06:34 +00:00
nbd
c0b61bdf0a mac80211: update to wireless-testing 2011-04-06 
adds some more pending patches which (among other things) fix the 'failed to stop RX DMA' messages

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26506 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 18:42:22 +00:00
cshore
f6577081a4 [package] block-mount: Reverting 26503. Was already fixed in a better way in commit 26474. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26505 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 01:00:14 +00:00
acinonyx
f440a949fb [packages] madwifi: typo(s) in /lib/wifi/madwifi.sh 
Hi
minrate and maxrate are acually not boolean, so, for example
"config minrate 11000" in /etc/config/wireless has no effect.

Signed-off by: Jan Hetges <tran@ms20.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-06 20:50:14 +00:00
acinonyx
5d875c6c40 [package] block-mount: fsck.sh should only call pi_include() if dir /lib/functions/fsck exists. 
/etc/functions.sh:pi_include() checks if the argument exists and prints
a warning if not. To prevent this warning if package block-mount is installed
but not package e2fsprogs, the script should check if this directory exists
before calling pi_include()

A wrong patch to suppress this warning was previously posted
with subject:
	[PATCH] Fix typo in name of to be included file

Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-06 20:50:06 +00:00
nbd
4d2516986c build: log package dump failures to logs to avoid forcing user to write cryptic commands to figure out what's going on 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-06 14:48:59 +00:00
nbd
0a4b9c0e44 build: clean up handling of the kernel config 
- support kernel config overlays in env/
- allow overriding the target kernel config with CONFIG_TARGET=platform|subtarget|env

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-06 14:48:55 +00:00
nbd
d0c6aec8d9 ath9k: fall back to the default noise floor if the calibrated one is not available, fixes signal strength display in initial scan 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26494 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-05 19:04:05 +00:00
nbd
a3b94c1245 busybox: get rid of the useless extra menu 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26493 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-05 19:04:02 +00:00
nbd
73e204606b librpc: use MDEPENDS instead of DEPENDS for @USE_UCLIBC to fix recursive busybox dependencies 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-05 19:03:55 +00:00
nbd
db273bc36e add a new package metadata variable MDEPENDS for specifying local menuconfig dependencies that do not propagate to other packages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-05 19:03:51 +00:00
acinonyx
f6d755eda4 [package] base-files: Use -h instead of deprecated -L for symlink check 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-05 15:09:43 +00:00