juhosg
|
fae32e3e86
|
ar71xx: add ar71xx_gpio_function_setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20053 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-08 12:10:14 +00:00 |
|
juhosg
|
7ee68b0bf3
|
ar71xx: add LED driver for the RB750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20051 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-08 12:10:01 +00:00 |
|
juhosg
|
bdf568ed13
|
ar71xx: add latch handling code for the RB750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20050 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-08 12:09:49 +00:00 |
|
juhosg
|
8221ebb020
|
ar71xx: add preliminary support for the RouterBOARD 750
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20029 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-07 05:41:01 +00:00 |
|
juhosg
|
1ce5f3c0cf
|
ar71xx: rename mach-rb-4xx.c to mach-rb4xx.c, and change Kconfig symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20027 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-07 05:40:56 +00:00 |
|
juhosg
|
da900edca4
|
ar71xx: don't init PCI irqs on the AR7240 if the PCIe subsystem are in reset
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20007 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-05 20:29:29 +00:00 |
|
juhosg
|
0955ccfcf3
|
ar71xx: ag71xx: move calling ag71xx_phy_stop out from spinlock
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20004 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-05 20:29:22 +00:00 |
|
juhosg
|
5b74d557fa
|
ar71xx: ag71xx: move link update function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20003 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-05 20:29:18 +00:00 |
|
juhosg
|
99dab77b59
|
ar71xx: ag71xx: don't use dev->trans_start
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20002 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-05 20:29:14 +00:00 |
|
juhosg
|
54b41868d6
|
ar71xx: ag71xx: use dma_unmap_single to unmap frames
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20001 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-05 20:29:10 +00:00 |
|
juhosg
|
ee12427e21
|
ar71xx: ag71xx: use correct device pointer for dma_map_single
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19951 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-02 13:36:18 +00:00 |
|
juhosg
|
a1c949e3fc
|
ar71xx: ag71xx: don't use virt_to_phys
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19950 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-02 13:36:15 +00:00 |
|
juhosg
|
9cef2f85c2
|
ar71xx: ag71xx: simplify register access functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19949 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-02 13:36:12 +00:00 |
|
juhosg
|
75c4494280
|
ar71xx: ag71xx: use NETDEV_TX_OK
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19948 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-02 13:36:09 +00:00 |
|
juhosg
|
4001872b63
|
ar71xx: use COMMAND_LINE_SIZE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19947 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-02 13:36:04 +00:00 |
|
juhosg
|
ea92a8bef8
|
ar71xx: register DSA switch for the AP91 based boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19928 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-01 07:34:43 +00:00 |
|
juhosg
|
e7f38ddc4f
|
ar71xx: add DSA driver for the AR7240 built-in ethernet switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19927 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-01 07:34:41 +00:00 |
|
juhosg
|
6eb16ce40c
|
ar71xx: add QinQ tagging format for the DSA driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19926 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-03-01 07:34:37 +00:00 |
|
juhosg
|
86143fe010
|
ar71xx: register RTL8366RB switch on the TL-WR1043NB board
Thanks to Andrew Tarabaras.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19839 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-24 13:39:18 +00:00 |
|
juhosg
|
147a9455b7
|
ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND board
Thanks to Andrew Tarabaras
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19835 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-24 13:38:51 +00:00 |
|
juhosg
|
7bdbc197cd
|
ar71xx: enable TX/RX flow control on the AR7240
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19832 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-24 13:38:41 +00:00 |
|
juhosg
|
ad11dad16d
|
ar71xx: fix mac addresses on the DIR-600 rev. A1 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19752 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-19 11:52:42 +00:00 |
|
juhosg
|
0faa4c10ff
|
ar71xx: fix wireless mac address on the TL-WR741ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19751 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-19 11:52:39 +00:00 |
|
juhosg
|
aaaca934ab
|
ar71xx: move AP91 specific ethernet initialization into a separate file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19750 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-19 11:52:36 +00:00 |
|
juhosg
|
cadd5454c3
|
ar71xx: add missing GPIO LED for the WNDR3700 board
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19744 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-19 11:52:19 +00:00 |
|
juhosg
|
0a0ed2c3ec
|
ar71xx: fix polarity of GPIO buttons on the WNDR3700 board
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19743 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-19 11:52:15 +00:00 |
|
juhosg
|
03ec19bb1a
|
ar71xx: fix WLAN mac address on the TL-WR1043ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19573 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-10 20:01:20 +00:00 |
|
juhosg
|
ae4dfcda15
|
ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19565 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-09 16:27:35 +00:00 |
|
juhosg
|
4ff3c261aa
|
ar71xx: add missing fields to the ar71xx-ehci driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19534 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-02-06 17:00:16 +00:00 |
|
juhosg
|
d7d76ebff9
|
rtl8366: make it available on all platforms
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-25 15:13:38 +00:00 |
|
juhosg
|
57a1f64fd7
|
rtl8366s: simplify mib counters handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19326 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-25 14:24:53 +00:00 |
|
juhosg
|
f32ec31b3b
|
ar71xx: merge generic machine code into setup.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19325 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-25 14:24:48 +00:00 |
|
juhosg
|
e47c4f9d9e
|
rtl8366_smi: move RTL8366S driver into a separate file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19279 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:38:07 +00:00 |
|
juhosg
|
62717a96cd
|
rtl8366_smi: rename rtl8366s specific functions and definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19278 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:37:58 +00:00 |
|
juhosg
|
1d1fe9d55e
|
rtl8366_smi: move chip specific stuff into its own struct
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19277 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:37:53 +00:00 |
|
juhosg
|
878e6fafb0
|
rtl8366_smi: separate gpio initialization
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19276 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:37:50 +00:00 |
|
juhosg
|
d4dafe5ce3
|
rtl8366_smi: store GPIO numbers directly in the rtl8366_smi struct
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19275 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:37:47 +00:00 |
|
juhosg
|
0a71019902
|
rtl8366_smi: store device pointer instead of plaform_device
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19274 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-22 17:37:41 +00:00 |
|
juhosg
|
3e3062918b
|
rtl8366_smi: rename switch attribute handlers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19254 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-21 12:13:43 +00:00 |
|
juhosg
|
4162526b1d
|
rtl8366_smi: simplify rtl8366_attr_get_port_link function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19250 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 20:36:30 +00:00 |
|
juhosg
|
4cff025384
|
rtl8366_smi: make rtl8366_phy_config_{aneg,init} static
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19249 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 20:36:27 +00:00 |
|
juhosg
|
a51fdf9d02
|
rtl8366_smi: simplify rtl8366_{get,set}_port_vlan_index functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19248 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 20:36:24 +00:00 |
|
juhosg
|
64f1c1d827
|
rtl8366_smi: minor code optimalizations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19247 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 20:36:21 +00:00 |
|
juhosg
|
aac113a5bf
|
rtl8366_smi: coding style cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19246 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 17:40:39 +00:00 |
|
juhosg
|
75c9ca9730
|
rtl8366_smi: add Kconfig option for the debugfs stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19243 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 09:30:36 +00:00 |
|
juhosg
|
01b8553904
|
rtl8366_smi: fix error checking in rtl8366s_set_vlan_4k_entry
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19242 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 09:30:32 +00:00 |
|
juhosg
|
f3d96d2a1e
|
rtl8366_smi: fix parameter checking in rtl8366_attr_get_vlan_info
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19241 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 09:30:25 +00:00 |
|
juhosg
|
72607e76c7
|
rtl8366_smi: fix return codes in rtl8366s_reset_vlan
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19240 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 07:06:18 +00:00 |
|
juhosg
|
e191d5d165
|
rtl8366_smi: move variable initialization out from the loop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19239 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 07:06:15 +00:00 |
|
juhosg
|
77450dabca
|
rtl8366_smi: fix port->flags calculation in rtl8366_get_ports
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19237 3c298f89-4303-0410-b956-a3cf2f4a3e73
|
2010-01-20 07:06:10 +00:00 |
|