qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 23:32:49 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
19,222 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
098bdd39a0
Go to file
jow 098bdd39a0 [include] autotools.mk: like libintl, make all libtool fixup packages depend on the libiconv stub 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24708 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-19 04:41:18 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include [include] autotools.mk: like libintl, make all libtool fixup packages depend on the libiconv stub 2010-12-19 04:41:18 +00:00
package [package] opkg: remove stray HOST_BUILD_DEPENDS 2010-12-18 19:16:03 +00:00
scripts [scripts] download.pl: pass --no-check-certificate to wget 2010-12-18 20:54:53 +00:00
target generic: fix min/max confusion in jffs2_sum_init on 2.6.32 2010-12-17 20:34:26 +00:00
toolchain [toolchain/gcc]: upgrade the linaro gcc to the 2010.12 release 2010-12-14 09:50:59 +00:00
tools tools: fix dependencies 2010-12-19 00:05:17 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in remove 2.6.25 support 2010-11-22 13:43:32 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk [include] 2010-12-13 19:04:33 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org