mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-01-23 23:11:06 +02:00
0ba3851aa6
wget2nand didnt check the exit status after copying the kernel, if the copying failed for some reason ( for example not enougs space on the kernel partition) it simply continued extracting the rootfs. I also changed the filename, which wget2nand trys to download ( .tar.gz instead of .tgz ). Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org