mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-19 04:12:29 +02:00
247c33e26d
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8280 3c298f89-4303-0410-b956-a3cf2f4a3e73
413 lines
8.7 KiB
C
413 lines
8.7 KiB
C
/*
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006, 2007 OpenWrt.org
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/autoconf.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ar7/ar7.h>
|
|
#include <asm/ar7/gpio.h>
|
|
#include <asm/ar7/prom.h>
|
|
#include <asm/ar7/vlynq.h>
|
|
|
|
struct plat_vlynq_data {
|
|
struct plat_vlynq_ops ops;
|
|
int gpio_bit;
|
|
int reset_bit;
|
|
};
|
|
|
|
|
|
static int vlynq_on(struct vlynq_device *dev)
|
|
{
|
|
int result;
|
|
struct plat_vlynq_data *pdata = dev->dev.platform_data;
|
|
|
|
if ((result = gpio_request(pdata->gpio_bit, "vlynq")))
|
|
goto out;
|
|
|
|
ar7_device_reset(pdata->reset_bit);
|
|
|
|
if ((result = ar7_gpio_disable(pdata->gpio_bit)))
|
|
goto out_enabled;
|
|
|
|
if ((result = ar7_gpio_enable(pdata->gpio_bit)))
|
|
goto out_enabled;
|
|
|
|
if ((result = gpio_direction_output(pdata->gpio_bit)))
|
|
goto out_gpio_enabled;
|
|
|
|
gpio_set_value(pdata->gpio_bit, 0);
|
|
mdelay(50);
|
|
|
|
gpio_set_value(pdata->gpio_bit, 1);
|
|
mdelay(50);
|
|
|
|
return 0;
|
|
|
|
out_gpio_enabled:
|
|
ar7_gpio_disable(pdata->gpio_bit);
|
|
out_enabled:
|
|
ar7_device_disable(pdata->reset_bit);
|
|
gpio_free(pdata->gpio_bit);
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static void vlynq_off(struct vlynq_device *dev)
|
|
{
|
|
struct plat_vlynq_data *pdata = dev->dev.platform_data;
|
|
ar7_gpio_disable(pdata->gpio_bit);
|
|
gpio_free(pdata->gpio_bit);
|
|
ar7_device_disable(pdata->reset_bit);
|
|
}
|
|
|
|
static struct resource physmap_flash_resource = {
|
|
.name = "mem",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = 0x10000000,
|
|
.end = 0x103fffff,
|
|
};
|
|
|
|
static struct resource cpmac_low_res[] = {
|
|
{
|
|
.name = "regs",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = AR7_REGS_MAC0,
|
|
.end = AR7_REGS_MAC0 + 0x7FF,
|
|
},
|
|
{
|
|
.name = "irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 27,
|
|
.end = 27,
|
|
},
|
|
};
|
|
|
|
static struct resource cpmac_high_res[] = {
|
|
{
|
|
.name = "regs",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = AR7_REGS_MAC1,
|
|
.end = AR7_REGS_MAC1 + 0x7FF,
|
|
},
|
|
{
|
|
.name = "irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 41,
|
|
.end = 41,
|
|
},
|
|
};
|
|
|
|
static struct resource vlynq_low_res[] = {
|
|
{
|
|
.name = "regs",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = AR7_REGS_VLYNQ0,
|
|
.end = AR7_REGS_VLYNQ0 + 0xff,
|
|
},
|
|
{
|
|
.name = "irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 29,
|
|
.end = 29,
|
|
},
|
|
{
|
|
.name = "mem",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = 0x04000000,
|
|
.end = 0x04ffffff,
|
|
},
|
|
{
|
|
.name = "devirq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 80,
|
|
.end = 111,
|
|
},
|
|
};
|
|
|
|
static struct resource vlynq_high_res[] = {
|
|
{
|
|
.name = "regs",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = AR7_REGS_VLYNQ1,
|
|
.end = AR7_REGS_VLYNQ1 + 0xFF,
|
|
},
|
|
{
|
|
.name = "irq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 33,
|
|
.end = 33,
|
|
},
|
|
{
|
|
.name = "mem",
|
|
.flags = IORESOURCE_MEM,
|
|
.start = 0x0c000000,
|
|
.end = 0x0cffffff,
|
|
},
|
|
{
|
|
.name = "devirq",
|
|
.flags = IORESOURCE_IRQ,
|
|
.start = 112,
|
|
.end = 143,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data physmap_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct plat_cpmac_data cpmac_low_data = {
|
|
.reset_bit = 17,
|
|
.power_bit = 20,
|
|
.phy_mask = 0x80000000,
|
|
};
|
|
|
|
static struct plat_cpmac_data cpmac_high_data = {
|
|
.reset_bit = 21,
|
|
.power_bit = 22,
|
|
.phy_mask = 0x7fffffff,
|
|
};
|
|
|
|
static struct plat_vlynq_data vlynq_low_data = {
|
|
.ops.on = vlynq_on,
|
|
.ops.off = vlynq_off,
|
|
.reset_bit = 20,
|
|
.gpio_bit = 18,
|
|
};
|
|
|
|
static struct plat_vlynq_data vlynq_high_data = {
|
|
.ops.on = vlynq_on,
|
|
.ops.off = vlynq_off,
|
|
.reset_bit = 16,
|
|
.gpio_bit = 19,
|
|
};
|
|
|
|
static struct platform_device physmap_flash = {
|
|
.id = 0,
|
|
.name = "physmap-flash",
|
|
.dev.platform_data = &physmap_flash_data,
|
|
.resource = &physmap_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static struct platform_device cpmac_low = {
|
|
.id = 0,
|
|
.name = "cpmac",
|
|
.dev.platform_data = &cpmac_low_data,
|
|
.resource = cpmac_low_res,
|
|
.num_resources = ARRAY_SIZE(cpmac_low_res),
|
|
};
|
|
|
|
static struct platform_device cpmac_high = {
|
|
.id = 1,
|
|
.name = "cpmac",
|
|
.dev.platform_data = &cpmac_high_data,
|
|
.resource = cpmac_high_res,
|
|
.num_resources = ARRAY_SIZE(cpmac_high_res),
|
|
};
|
|
|
|
static struct platform_device vlynq_low = {
|
|
.id = 0,
|
|
.name = "vlynq",
|
|
.dev.platform_data = &vlynq_low_data,
|
|
.resource = vlynq_low_res,
|
|
.num_resources = ARRAY_SIZE(vlynq_low_res),
|
|
};
|
|
|
|
static struct platform_device vlynq_high = {
|
|
.id = 1,
|
|
.name = "vlynq",
|
|
.dev.platform_data = &vlynq_high_data,
|
|
.resource = vlynq_high_res,
|
|
.num_resources = ARRAY_SIZE(vlynq_high_res),
|
|
};
|
|
|
|
|
|
/* This is proper way to define uart ports, but they are then detected
|
|
* as xscale and, obviously, don't work...
|
|
*/
|
|
#if !defined(CONFIG_SERIAL_8250)
|
|
|
|
static struct plat_serial8250_port uart0_data =
|
|
{
|
|
.mapbase = AR7_REGS_UART0,
|
|
.irq = AR7_IRQ_UART0,
|
|
.regshift = 2,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
};
|
|
|
|
static struct plat_serial8250_port uart1_data =
|
|
{
|
|
.mapbase = UR8_REGS_UART1,
|
|
.irq = AR7_IRQ_UART1,
|
|
.regshift = 2,
|
|
.iotype = UPIO_MEM,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
|
|
};
|
|
|
|
static struct plat_serial8250_port uart_data[] = {
|
|
uart0_data,
|
|
uart1_data,
|
|
{ .flags = 0 }
|
|
};
|
|
|
|
static struct plat_serial8250_port uart_data_single[] = {
|
|
uart0_data,
|
|
{ .flags = 0 }
|
|
};
|
|
|
|
static struct platform_device uart = {
|
|
.id = 0,
|
|
.name = "serial8250",
|
|
.dev.platform_data = uart_data_single
|
|
};
|
|
#endif
|
|
|
|
static inline unsigned char char2hex(char h)
|
|
{
|
|
switch (h) {
|
|
case '0': case '1': case '2': case '3': case '4':
|
|
case '5': case '6': case '7': case '8': case '9':
|
|
return h - '0';
|
|
case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
|
|
return h - 'A' + 10;
|
|
case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
|
|
return h - 'a' + 10;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void cpmac_get_mac(int instance, unsigned char *dev_addr)
|
|
{
|
|
int i;
|
|
char name[5], default_mac[] = "00:00:00:12:34:56", *mac;
|
|
|
|
mac = NULL;
|
|
sprintf(name, "mac%c", 'a' + instance);
|
|
mac = prom_getenv(name);
|
|
if (!mac) {
|
|
sprintf(name, "mac%c", 'a');
|
|
mac = prom_getenv(name);
|
|
}
|
|
if (!mac)
|
|
mac = default_mac;
|
|
for (i = 0; i < 6; i++)
|
|
dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
|
|
char2hex(mac[i * 3 + 1]);
|
|
}
|
|
|
|
static int __init ar7_register_devices(void)
|
|
{
|
|
int res;
|
|
|
|
#ifdef CONFIG_SERIAL_8250
|
|
|
|
static struct uart_port uart_port[2];
|
|
|
|
memset(uart_port, 0, sizeof(struct uart_port) * 2);
|
|
|
|
uart_port[0].type = PORT_AR7;
|
|
uart_port[0].line = 0;
|
|
uart_port[0].irq = AR7_IRQ_UART0;
|
|
uart_port[0].uartclk = ar7_bus_freq() / 2;
|
|
uart_port[0].iotype = UPIO_MEM;
|
|
uart_port[0].mapbase = AR7_REGS_UART0;
|
|
uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
|
|
uart_port[0].regshift = 2;
|
|
res = early_serial_setup(&uart_port[0]);
|
|
if (res)
|
|
return res;
|
|
|
|
|
|
// Only TNETD73xx have a second serial port
|
|
if (ar7_has_second_uart()) {
|
|
uart_port[1].type = PORT_AR7;
|
|
uart_port[1].line = 1;
|
|
uart_port[1].irq = AR7_IRQ_UART1;
|
|
uart_port[1].uartclk = ar7_bus_freq() / 2;
|
|
uart_port[1].iotype = UPIO_MEM;
|
|
uart_port[1].mapbase = UR8_REGS_UART1;
|
|
uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
|
|
uart_port[1].regshift = 2;
|
|
res = early_serial_setup(&uart_port[1]);
|
|
if (res)
|
|
return res;
|
|
}
|
|
|
|
#else // !CONFIG_SERIAL_8250
|
|
|
|
uart_data[0].uartclk = ar7_bus_freq() / 2;
|
|
uart_data[1].uartclk = uart_data[0].uartclk;
|
|
|
|
// Only TNETD73xx have a second serial port
|
|
if (ar7_has_second_uart()) {
|
|
uart.dev.platform_data = uart_data;
|
|
}
|
|
|
|
res = platform_device_register(&uart);
|
|
if (res)
|
|
return res;
|
|
|
|
#endif // CONFIG_SERIAL_8250
|
|
|
|
res = platform_device_register(&physmap_flash);
|
|
if (res)
|
|
return res;
|
|
|
|
res = platform_device_register(&vlynq_low);
|
|
if (res)
|
|
return res;
|
|
|
|
ar7_device_disable(vlynq_low_data.reset_bit);
|
|
if (ar7_has_high_vlynq()) {
|
|
ar7_device_disable(vlynq_high_data.reset_bit);
|
|
res = platform_device_register(&vlynq_high);
|
|
if (res)
|
|
return res;
|
|
}
|
|
|
|
if (ar7_has_high_cpmac()) {
|
|
cpmac_get_mac(1, cpmac_high_data.dev_addr);
|
|
res = platform_device_register(&cpmac_high);
|
|
if (res)
|
|
return res;
|
|
} else {
|
|
cpmac_low_data.phy_mask = 0xffffffff;
|
|
}
|
|
|
|
cpmac_get_mac(0, cpmac_low_data.dev_addr);
|
|
res = platform_device_register(&cpmac_low);
|
|
|
|
return res;
|
|
}
|
|
|
|
|
|
arch_initcall(ar7_register_devices);
|