qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-10-04 06:36:21 +03:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
18,384 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
1a883422c6
Go to file
juhosg 1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27 14:43:34 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include fix build dependencies on packages with multiple variants but no selected virtual packages 2010-09-20 20:17:28 +00:00
package package/dropbear: simplify & reduce init script size (closes #7985) 2010-09-24 15:57:53 +00:00
scripts fix build dependencies on packages with multiple variants but no selected virtual packages 2010-09-20 20:17:28 +00:00
target ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 2010-09-27 14:43:34 +00:00
toolchain gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size 2010-09-20 20:49:34 +00:00
tools [tools] mtd-utils: revert r23075 2010-09-15 23:50:31 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Add support for enabling early printk. 2010-09-15 16:27:02 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk [buildroot] drop the usr/ prefix when scanning for libgcc.a 2010-09-12 22:19:29 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org