qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 18:35:55 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
18,629 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
218bf04570
Go to file
florian 218bf04570 [feeds] add support for darcs-based feeds 
The following patch adds support for darcs-based feeds.
It is tested and works well for my purpose.  I wish it
were committed upstream so that I can share my feed with
other users without converting it to svn/git/whatever.

Best regards,

Signed-off-by: Gabriel Kerneis <kerneis@pps.jussieu.fr>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-24 12:36:51 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include [buildroot] add support for darcs repositories 2010-10-24 12:36:44 +00:00
package hostapd: fix AP+STA reconnects 2010-10-24 00:19:34 +00:00
scripts [feeds] add support for darcs-based feeds 2010-10-24 12:36:51 +00:00
target [x86] add required symbols to allow building of 2.6.35.7 2010-10-23 18:56:19 +00:00
toolchain [toolchain]: gcc 4.4.5 support 2010-10-04 12:21:58 +00:00
tools tools/mtd-utils: add two upstream patches 2010-10-15 07:52:37 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in as we only support 2.6, remove the useless bool for it 2010-10-05 14:19:00 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk Add HOST_FPIC. It currently always is -fPIC, because that should work on all platforms, even if it may generate slightly inefficient code on some arches. 2010-10-23 20:30:43 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org