juhosg 439a47e380 ramips: W306R V2.0 - GPIO and Network fixes ... Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-05-02 19:17:59 +00:00
..
common	ramips: replace RALINK_SOC_* macros with global variables	2012-03-11 19:05:56 +00:00
rt288x	ramips: replace RALINK_SOC_* macros with global variables	2012-03-11 19:05:56 +00:00
rt305x	ramips: W306R V2.0 - GPIO and Network fixes	2012-05-02 19:17:59 +00:00
rt3883	ramips: replace RALINK_SOC_* macros with global variables	2012-03-11 19:05:56 +00:00
Kconfig	ramips: select HW_HAS_PCI on per-board basis	2012-02-16 08:17:54 +00:00
Platform	ramips: add preliminary support for the RT3662/RT3883 SoCs	2012-02-13 15:17:59 +00:00