mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-01-23 06:11:06 +02:00
2caf3c66a2
dnsmasq currently permits dhcp_options to be specified only in "config dhcp" sections of /etc/config/dhcp. When dnsmasq is providing DHCP service for multiple subnets and there are multiple "config dhcp" sections without "option ignore", it makes sense to allow dhcp_options that should apply globally in the "config dnsmasq" section of /etc/config/dhcp. dhcp_option is a list option. [jow: rework patch to apply after dhcp-option-force handling got introduced] Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32568 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org