mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-23 13:14:43 +02:00
2ed8e5602f
so that the clocks are always generated by the remote device instead of the local one. Upon initialization the current version of vlynq driver disables remote clock generation and causes the entire bus to hang on my device. This patch adds support for detecting which device (local or remote) is responsible of clock generation and implements clock initialization based on detection result. Signed-off-by: Antti Seppala <a.seppala at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16049 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org