mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-05 21:11:05 +02:00
37d47ead81
When using the Broadcom SDK the SSB bus is emulated as an PCI bus so the PCI bus number of the first real pci bus is increased by one. The variable names in the nvram are created with that structure in mind. To fix this we have ti increases the pci bus number by one. This was also done for ssb some time ago. This is based on a patch by nlh. This closes #10917 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30422 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org