mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-03 13:21:06 +02:00
389232eaac
- partially revert r21486, start firewall on init again - skip iface hotplug events if base fw is not up yet - get ifname and up state with uci_get_state() in iface setup since the values gathered by scan_interfaces() may be outdated when iface coldplugging happens (observed with pptp) - ignore up state when bringing down interfaces because ifdown reverts state vars before dispatching the iface event - bump package revision git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21502 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org