qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-28 11:34:36 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
18,463 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
4394096a92
Go to file
kaloz 4394096a92 [tools]: simplify old squashfs/lzma selection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05 14:14:12 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include [include] correct default package status info (install -> unknown) - fixes "opkg_conf_write_status_files: Internal error: package ... has a NULL dest" 2010-10-04 17:20:49 +00:00
package mac80211: ath9k: get tx gain type from eeprom 2010-10-05 14:10:32 +00:00
scripts [scripts] feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies 2010-10-02 02:37:27 +00:00
target ramips: Allow ethernet interface to be taken down and up again 2010-10-05 14:10:34 +00:00
toolchain [toolchain]: gcc 4.4.5 support 2010-10-04 12:21:58 +00:00
tools [tools]: simplify old squashfs/lzma selection 2010-10-05 14:14:12 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in optionally support parallel toolchain build. This defaults to off, because certain toolchain versions are known to break on parallel build. However, it significantly speeds up the build and latest versions of the tools do compile fine. 2010-10-03 12:54:07 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk [buildroot] drop the usr/ prefix when scanning for libgcc.a 2010-09-12 22:19:29 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org