openwrt-xburst

mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 16:43:09 +02:00

OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/

Go to file

juhosg 4b296a3cb3 linux/3.3: add more missing symbols git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31552 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-05-02 18:27:19 +00:00
docs	[docs]: kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	kernel: update linux 3.3 to 3.3.4	2012-04-30 08:38:11 +00:00
package	[package] openssl: update to 1.0.1b	2012-05-02 15:40:32 +00:00
scripts	[scripts] ext-toolchain.sh: don't pass CFLAGS when wrapping ld	2012-05-01 22:45:55 +00:00
target	linux/3.3: add more missing symbols	2012-05-02 18:27:19 +00:00
toolchain	[coldfire]: switch to 2.6.38	2012-05-01 07:00:17 +00:00
tools	tools: add xz dependency to automake	2012-04-21 16:09:04 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	make xz ramdisk images also available for 2.6.39+	2012-04-18 15:14:05 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	[buildroot] abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	[include] Use build suffix on build_dir paths	2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org