juhosg 57ffcdaccd ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards ... This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-01-26 10:44:23 +00:00
..
rt288x	ramips: define GPIO chips separately for each SoCs	2011-03-27 19:19:59 +00:00
rt305x	ramips: define GPIO chips separately for each SoCs	2011-03-27 19:19:59 +00:00
common.h	ramips: move GPIO definitions into a separate header file	2011-03-27 19:19:57 +00:00
dev-gpio-buttons.h	ramips: remove extern and __init from function prototypes	2011-01-26 20:48:33 +00:00
dev-gpio-leds.h	ramips: remove extern and __init from function prototypes	2011-01-26 20:48:33 +00:00
gpio.h	[ramips] fix GPIOLIB support	2009-08-31 08:29:19 +00:00
irq.h	[ramips] initial support for RT288x/RT305x	2009-08-30 19:15:51 +00:00
machine.h	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards	2012-01-26 10:44:23 +00:00
ramips_eth_platform.h	ramips: add mdio_cfg configuration for the ethernet driver	2010-07-15 19:45:40 +00:00
ramips_gpio.h	ramips: move GPIO definitions into a separate header file	2011-03-27 19:19:57 +00:00
rt288x_regs.h	ramips: rt288x: change base address and window size of flash bank 0	2011-12-28 08:43:36 +00:00
rt288x.h	ramips: implement clock API for RT288x	2011-01-26 20:48:39 +00:00
rt305x_esw_platform.h	ramips: initial support for Sitecom WL-351 v1 002	2011-12-23 14:27:16 +00:00
rt305x_regs.h	ramips: add SPI controller driver	2011-07-28 10:56:25 +00:00
rt305x.h	ramips: implement clock API for RT305X	2011-01-26 20:48:35 +00:00
war.h	[ramips] header cleanup	2009-08-30 19:55:53 +00:00