qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-28 20:42:24 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
17,563 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
5997df5231
Go to file
Xiangfu Liu 5997df5231 add a lot of apps entry in gmenu2x 
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
2011-05-10 06:59:30 -08:00
data/qi_lb60 add a lot of apps entry in gmenu2x 2011-05-10 06:59:30 -08:00
docs Add documentation for passphrase option. 2009-09-24 21:50:17 +00:00
include [backfire] merge r26589 2011-04-11 14:19:34 +00:00
package add ks7010 drivers 2011-05-10 06:59:27 -08:00
scripts add <http://downloads.qi-hardware.com/sources> as mirror for source 2011-05-10 06:59:28 -08:00
target [linux] support increase/decrease in screen brightness 2011-05-10 06:59:29 -08:00
toolchain enable locale support in uClibc 2011-05-10 06:59:29 -08:00
tools [backfire] merge r26642 2011-04-13 13:27:13 +00:00
.gitignore [backfire] merge r24238 & r26785 2011-04-29 15:15:36 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in mark mklibs as broken, fixes are in trunk but too intrusive to backport 2011-03-15 21:34:16 +00:00
feeds.conf.default [backfire] switch to LuCI 0.10 branch 2011-01-10 00:27:52 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk build: move the CCACHE_DIR to the build targets so that it doesn't interfere with a host ccache setup (backport of r26181) 2011-03-15 19:59:58 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org