mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-01-29 04:51:05 +02:00
59dd24394e
This patch adds WLAN LED support to the mac80211 driver for Ralink rt2x00/rt2800 (rt305x) SoC devices. The current driver in kmod-rt2800-lib is based upon PCI, not SoC. The WLAN LED drivers in rt2800lib.c set the LED brightness via an MCU request, but do nothing for SoC. This patch checks for SoC and sets the register to enable the WLAN LED (instead of an MCU request). This fixes the WLAN LED for RT305x devices (such as the HW550-3G). Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26463 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org