qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-26 05:43:20 +02:00
Code
63d3e3114d
openwrt-xburst/target/linux/ramips/image/Makefile
juhosg 439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02 19:17:59 +00:00

503 lines
18 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
fs_squash:=squashfs-only
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
fs_squash:=initramfs
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
endif
ifeq ($(CONFIG_RALINK_RT288X),y)
define kernel_entry
-a 0x88000000 -e 0x88000000
endef
else
define kernel_entry
-a 0x80000000 -e 0x80000000
endef
endif
define mkcmdline
board=$(1) console=$(2),$(3)
endef
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define PatchKernelLzma
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
endef
define MkImage
mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $(2) $(3)
endef
define MkImageLzma
$(call PatchKernelLzma,$(1),$(2))
$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage)
endef
define CatFiles
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
echo "Warning: $(1) is too big"; \
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
echo "Warning: $(3) is too big"; \
else \
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
fi; fi
endef
define Sysupgrade/KRuImage
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)))
endef
define mkmtd
mtdparts=$(1):$(2)
endef
define mkmtd/phys
$(call mkmtd,physmap-flash.0,$(1))
endef
define mkmtd/spi
$(call mkmtd,spi0.0,$(1))
endef
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
$(call Image/Build/Initramfs)
endef
define BuildFirmware/Generic
$(call MkImageLzma,$(2),$(3))
$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
endef
define BuildFirmware/Generic/initramfs
$(call MkImageLzma,$(2),$(3))
$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
endef
mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
define BuildFirmware/GENERIC_4M
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
endef
define BuildFirmware/GENERIC_4M/initramfs
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)))
endef
mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
kernel_size_8M=917504
rootfs_size_8M=7143424
define BuildFirmware/GENERIC_8M
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M))
endef
define BuildFirmware/GENERIC_8M/initramfs
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
endef
mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
mtd_argus_atp52b_kernel_part_size=1179648
mtd_argus_atp52b_rootfs_part_size=6815744
define BuildFirmware/ARGUS_ATP52B
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
endef
define BuildFirmware/Buffalo
$(call MkImageLzma,$(2),$(3))
$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/vmlinux-$(2).uImage \
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/root.$(1) \
-o $(KDIR)/root.$(2).enc; \
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
-l mlang8 -f 1 -r EU \
-i $(KDIR)/vmlinux-$(2).uImage.enc \
-i $(KDIR)/root.$(2).enc \
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
fi
endef
define BuildFirmware/Buffalo2
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6))
endef
mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
mtd_dir300b1_kernel_part_size=917504
mtd_dir300b1_rootfs_part_size=2949120
define BuildFirmware/DIR300B1
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
mkwrgimg -s $(4) -d /dev/mtdblock/2 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
define BuildFirmware/DIR300B1/initramfs
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
endef
define BuildFirmware/Edimax
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkedimaximg -i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin \
-s $(3) -m $(4) -f $(5) -S $(6); \
fi
endef
mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
mtd_f5d8235_kernel_part_size=1572864
mtd_f5d8235_rootfs_part_size=6356992
define BuildFirmware/F5D8235
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
endef
define BuildFirmware/FONERA20N
$(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
endef
define BuildFirmware/FONERA20N/initramfs
$(call BuildFirmware/GENERIC_8M/initramfs,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
endef
mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware)
kernel_size_nw718=917504
rootfs_size_nw718=2883584
cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718))
define BuildFirmware/NW718
$(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718))
$(call PatchKernelLzma,$(2),$(cmdline_nw718))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
-n "ARA1B4NCRNW718;1" \
-d "$(KDIR)/vmlinux-$(2).bin.lzma" \
"$(KDIR)/vmlinux-$(2).uImage"
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(kernel_size_nw718),$(KDIR)/root.$(1),$(rootfs_size_nw718),$(call imgname,$(1),$(2))-factory.bin)
endef
mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
mtd_rtg32b1_kernel_part_size=917504
mtd_rtg32b1_rootfs_part_size=2949120
define BuildFirmware/RTG32B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
endef
mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
mtd_rtn10plus_kernel_part_size=917504
mtd_rtn10plus_rootfs_part_size=2949120
define BuildFirmware/RTN10PLUS
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
endef
define BuildFirmware/W306R_4M
$(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
endef
define BuildFirmware/w306r
$(call PatchKernelLzma,$(2),$(3))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\
-n 'linkn Kernel Image' \
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin)
endef
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define BuildFirmware/WHRG300N
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
$(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088)
( \
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
dd bs=512 count=1 conv=sync; \
dd if=$(call sysupname,$(1),whr-g300n); \
) > $(KDIR)/whr-g300n-tftp.tmp
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-o $(call imgname,$(1),whr-g300n)-tftp.bin
endef
mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
kernel_size_wl341v3=917504
rootfs_size_wl341v3=2949120
define BuildFirmware/WL341V3
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=/dev/zero bs=195936 count=1; \
echo "1.01"; \
dd if=/dev/zero bs=581 count=1; \
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
dd if=/dev/zero bs=65552 count=1; \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define BuildFirmware/WLITX4AG300N
$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584)
endef
#
# Templates
#
define Image/Build/Template/initramfs/initramfs
$(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
endef
define Image/Build/Template/squashfs-only/squashfs
$(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
endef
#
# RT288X Profiles
#
define Image/Build/Profile/F5D8235V1
$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1)
endef
define Image/Build/Profile/RTN15
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys)
endef
define Image/Build/Profile/V11STFE
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys)
endef
define Image/Build/Profile/WLITX4AG300N
$(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N)
endef
ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/V11STFE,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
#
# RT305X Profiles
#
define Image/Build/Profile/ALL0256N
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
endef
define Image/Build/Profile/ARGUS_ATP52B
$(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B)
endef
define Image/Build/Profile/BC2
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
endef
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
endef
define Image/Build/Profile/ESR9753
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys)
endef
define Image/Build/Profile/HW5503G
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys)
endef
define Image/Build/Profile/F5D8235V2
$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2)
endef
define Image/Build/Profile/FONERA20N
$(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N)
endef
define Image/Build/Profile/FREESTATION5
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,freestation5,FREESTATION5,ttyS1,115200,phys)
endef
define Image/Build/Profile/MOFI35003GN
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys)
endef
define Image/Build/Profile/NBG419N
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG419N,ttyS1,57600,phys)
endef
define Image/Build/Profile/NW718
$(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718)
endef
define Image/Build/Profile/OMNIEMB
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys)
endef
define Image/Build/Profile/PWH2004
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys)
endef
define Image/Build/Profile/RTG32B1
$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
endef
define Image/Build/Profile/RTN10PLUS
$(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
endef
define Image/Build/Profile/SLR7205
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
endef
define Image/Build/Profile/V22RW2X2
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
endef
define Image/Build/Profile/W306R_V20
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
$(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
endef
define Image/Build/Profile/W502U
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
endef
define Image/Build/Profile/WCR150GN
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys)
endef
define Image/Build/Profile/WHRG300N
$(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N)
endef
define Image/Build/Profile/WL_330N
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi)
endef
define Image/Build/Profile/WL_330N3G
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi)
endef
define Image/Build/Profile/WL341V3
$(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3)
endef
define Image/Build/Profile/WL351
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys)
endef
define Image/Build/Profile/WR5123GN
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys)
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
endef
define Image/Build/Profile/UPVEL
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,ur-336un,UR-336UN,ttyS1,57600,phys)
endef
define Image/Build/Profile/WR6202
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
endef
define Image/Build/Profile/XDXRN502J
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys)
endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/FREESTATION5,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))
$(call Image/Build/Profile/NBG419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNIEMB,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/SLR7205,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WL_330N,$(1))
$(call Image/Build/Profile/WL_330N3G,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL351,$(1))
$(call Image/Build/Profile/WR5123GN,$(1))
$(call Image/Build/Profile/WR6202,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
endef
endif
#
# RT3662/RT3883 Profiles
#
define Image/Build/Profile/RTN56U
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,rt-n56u,RT-N56U,ttyS1,57600,phys)
endef
ifeq ($(CONFIG_RALINK_RT3883),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/RTN56U,$(1))
endef
endif
define Image/Build/Initramfs
$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
define Image/Build/squashfs
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
View Git Blame Copy Permalink